Livpure smart nook User manual

Ensure that the Wi-Fi LED on Nook is blinking twice. If not,
press & hold RESET button for 5 seconds to bring the Nook
in Wi-Fi configuration mode.
Wi-Fi LED status on Nook
Blinking twice : Ready to be configured with Wi-Fi
Blinking once : Trying to connect to Wi-Fi
Always on : Connected to Wi-Fi
STEP-3
Configure Nook device with your AC remote, as per
instructions shown on the App screen
STEP-2
Press ‘+’ Plus sign on
home screen or room
screen to add Nook in
the app and configure
with Wi-Fi.
Dear Customer,
We thank you for the trust you have shown in Livpure
Smart and its technology.
At Livpure, we aim to conquer new benchmarks in
technology and innovation and oer various elite choices
of smart home products.
Please go through the simple and easy to understand
instructions mentioned in the manual.
Any queries & suggestions, please call our customer care.
Looking forward to a long and fruitful association with
you.
Regards,
Team Livpure!
USER MANUAL
Smart AC Controller

Use Menu/Settings/Wi-Fi Settings to configure/change Wi-Fi
settings, anytime and without deleting the device from the App
If you have to use the physical AC remote at all, face it
towards Nook and operate. Nook will send the signal to
your AC and keep the App in sync with your AC.
Plot No. 221, Udyog Vihar, Phase-1
Gurgaon – 122016 Haryana (India)
Glowing SMART LED on Nook
indicates that smart mode is in
use.
HOW CAN YOU
SAVE ELECTRICITY?
VOICE CONTROL
Use Smart mode to save up to
40% energy. It automatically
sets the temperature of the AC
based on weather conditions
giving you comfort as well
along with energy savings.
You can voice control your AC through Nook, by using Alexa, Google
Home or SIRI. Link them through the App.
S