LOAD KING 35-127 M User manual

OPERATORS MANUAL
LOAD KING
35-127 M
C1046093 - REV A
FEBRUARY 09, 2022

PAGE INTENTIONALLY LEFT BLANK

For more informationgotowww.P65warnings.ca.gov/diesel.
•Always start andoperate theengine in awell-ventilated area.
•If in an enclosed area,ventthe exhausttothe outside.
•Donot modify or tamper with theexhaust system.
•Donot idle the engine except as necessary.
WARNING Operating, servicingand maintainingthis equipmentcan expose you
to chemicals including engine exhaust, carbon monoxide, phthalates, and lead,which
are knowntothe Stateof California to causecancer andbirth defects or other
reproductive harm.These chemicals canbeemitted from or contained in other various
parts and systems, fluids and some componentwear by-products. To minimize
exposure,avoid breathing exhaust, do not idlethe engine except as necessary, service
your equipmentand vehicle in awell-ventilated area andwear gloves or wash your
hands frequently when servicingyour equipmentor vehicleand afteroperation. For
more informationgotowww.P65Warnings.ca.gov/passenger-vehicle.
Breathingdiesel engine exhaustexposes youto chemicals knowntothe Stateof
Californiato cause cancer andbirth defectsorother reproductive harm.

4
Company
Load King has been producing rst-class heavy equipment since 1956. Cung-edge innovaon and
engineering excellence make us the market leader. Load King is a key part of the Custom Truck One Source
family of brands, oering standard and custom trailers, vocaonal equipment, and a full line of Boom
Trucks and truck cranes. For more informaon, please visit Load King’s website: www.loadkingmfg.com.
About Custom Truck One Source
Custom Truck One Source is the rst true single-source provider of specialized truck and heavy equipment
soluons. With sales, rentals, aermarket parts and service, equipment customizaon, remanufacturing,
nancing soluons, and asset disposal, our team of experts, vast equipment breadth and integrated
network of locaons across North America oer superior service and unmatched eciency for our
customers.

Table of Contents
5
1. Introduction .......................................................................................9
Construction and Industrial Equipment Product Safety���������������������������������� 9
35-127 M Nomenclature ������������������������������������������������������������������������������� 10
Standards ����������������������������������������������������������������������������������������������������� 11
Intended Use ������������������������������������������������������������������������������������������������ 12
Bulletin Distribution and Compliance������������������������������������������������������������ 13
Contacting Manufacturer������������������������������������������������������������������������������ 14
Transfer of Machine Ownership �������������������������������������������������������������������� 15
2. Safety ...............................................................................................17
Safety Introduction ��������������������������������������������������������������������������������������� 17
Product Safety Decals ���������������������������������������������������������������������������������� 18
Ansi Hazard Classification System ��������������������������������������������������������������� 18
Safety Sign Maintenance ������������������������������������������������������������������������������ 23
Personal Protection Equipment �������������������������������������������������������������������� 24
Workplace Safety������������������������������������������������������������������������������������������ 25
Effects of Wind Conditions ��������������������������������������������������������������������������� 34
Lightning Storm �������������������������������������������������������������������������������������������� 36
Temporary Interruption of Crane Operations ������������������������������������������������ 37
Resuming Crane Operations������������������������������������������������������������������������� 40
Ending Crane Operations������������������������������������������������������������������������������ 41
Turning/Driving in Reverse ���������������������������������������������������������������������������� 42
Parking the Vehicle ��������������������������������������������������������������������������������������� 43
Lock Out & Tag Out ��������������������������������������������������������������������������������������� 44
Personal Safety��������������������������������������������������������������������������������������������� 46
Seat Belts ����������������������������������������������������������������������������������������������������� 47
3. Assembly .........................................................................................49
Wire Rope Reeving ��������������������������������������������������������������������������������������� 49
Dead Ending Wire Rope in Socket ���������������������������������������������������������������� 50
Jib Mounting������������������������������������������������������������������������������������������������� 51
4. Description Of Machine and Controls ........................................... 63
Operator Controls ����������������������������������������������������������������������������������������� 63
Power Take-Off ��������������������������������������������������������������������������������������������� 65
Outrigger Stow Pins�������������������������������������������������������������������������������������� 66
Outrigger Controls ���������������������������������������������������������������������������������������� 68
Boom and Winch Controls���������������������������������������������������������������������������� 69
Rated Capacity Indicator and ATB ���������������������������������������������������������������� 71

6
35-127 H
Contents
Rated Capacity Indicator System ����������������������������������������������������������������� 71
ATB Components������������������������������������������������������������������������������������������ 72
5. Inspection ........................................................................................75
Suggested Hydraulic Crane Inspection Checklist����������������������������������������� 75
Pre-Start Inspection�������������������������������������������������������������������������������������� 80
Daily Check (8 Hours)������������������������������������������������������������������������������������ 82
Weekly Check (40 Hours)������������������������������������������������������������������������������ 83
Monthly Check (80 hours) ����������������������������������������������������������������������������� 84
Quarterly Checks (250 Hours)����������������������������������������������������������������������� 85
Semiannual Checks (1000 Hours)����������������������������������������������������������������� 86
Annual Check (1500 - 2000 Hours) ��������������������������������������������������������������� 87
Crane Boom�������������������������������������������������������������������������������������������������� 88
Wire Rope Inspection������������������������������������������������������������������������������������ 90
Wire Rope Inspection Record ����������������������������������������������������������������������� 92
Mobile Crane Load Test Inspection��������������������������������������������������������������� 93
6. Operating Instructions.................................................................... 97
Job-Site �������������������������������������������������������������������������������������������������������� 97
Job Site Setup Procedure����������������������������������������������������������������������������� 97
Outrigger Positioning������������������������������������������������������������������������������������ 98
Work Site Position����������������������������������������������������������������������������������������� 99
Cold Weather Operation ����������������������������������������������������������������������������� 100
General Operational Issues������������������������������������������������������������������������� 101
General Rules ��������������������������������������������������������������������������������������������� 101
Safety Devices �������������������������������������������������������������������������������������������� 102
Training and Operator Qualifications����������������������������������������������������������� 103
Operator Aids���������������������������������������������������������������������������������������������� 104
Load Handling Operations�������������������������������������������������������������������������� 105
Max� Load and Boom Angle Charts ������������������������������������������������������������ 106
Using the Maximum Load Chart ����������������������������������������������������������������� 106
Operating Radius���������������������������������������������������������������������������������������� 108
Boom Angle Placards ��������������������������������������������������������������������������������� 109
Operating the Unit��������������������������������������������������������������������������������������� 110
Initiating Operation ������������������������������������������������������������������������������������� 111
Arm and Hand Signals �������������������������������������������������������������������������������� 112
Lifting the Load ������������������������������������������������������������������������������������������� 116
Emergency Procedures ������������������������������������������������������������������������������ 117

Table of Contents
7
Emergency Boom Retraction���������������������������������������������������������������������� 118
Emergency Lowering of Boom�������������������������������������������������������������������� 119
Emergency Rotation ����������������������������������������������������������������������������������� 120
Emergency Retraction of Outriggers����������������������������������������������������������� 121
Roading the Unit ����������������������������������������������������������������������������������������� 122
7. Maintenance ..................................................................................125
Safety Practices������������������������������������������������������������������������������������������ 125
General Work Practices ������������������������������������������������������������������������������ 127
Cold Weather Package Specification���������������������������������������������������������� 128
Storing Components����������������������������������������������������������������������������������� 129
Cleanliness ������������������������������������������������������������������������������������������������� 130
35-127 M Master Lube Chart���������������������������������������������������������������������� 131
Maintenance Checks and Lubrication �������������������������������������������������������� 133
Hydraulic Hoses������������������������������������������������������������������������������������������ 136
Hydraulic Oil Requirements ������������������������������������������������������������������������ 138
90-Day Maintenance Items������������������������������������������������������������������������� 142
Semi-Annual Maintenance Items���������������������������������������������������������������� 143
Filters and Maintenance������������������������������������������������������������������������������ 144
Rotation System Maintenance and Troubleshooting ���������������������������������� 147
Swing System��������������������������������������������������������������������������������������������� 147
Care and Maintenance of the Rotation System������������������������������������������� 149
Rotation Gearbox and Gear Teeth��������������������������������������������������������������� 152
Swing (WAD/ISS) Sensor Check & Replacement Procedure ���������������������� 154
Winch Lubrication��������������������������������������������������������������������������������������� 160
Wire Rope Lubrication �������������������������������������������������������������������������������� 161
Storage ������������������������������������������������������������������������������������������������������� 162
Restoration to Service �������������������������������������������������������������������������������� 163
Engine Storage ������������������������������������������������������������������������������������������� 164
Restoring Engine to Service������������������������������������������������������������������������ 167
Transmission storage���������������������������������������������������������������������������������� 168
Restoring Transmission to Service�������������������������������������������������������������� 169
Chrome Cylinder Rod Storage�������������������������������������������������������������������� 170
8. Specications................................................................................ 171
Pumps and Function Speeds���������������������������������������������������������������������� 171

8
35-127 H
Contents
9. Troubleshooting............................................................................ 173
Troubleshooting ������������������������������������������������������������������������������������������ 173
Winch System Maintenance and Troubleshooting�������������������������������������� 174
Winch Maintenance and Repair ������������������������������������������������������������������ 174
10. Service / Parts................................................................................ 177
Hydraulic System Description��������������������������������������������������������������������� 177
Control Valves and Pressures ��������������������������������������������������������������������� 179
Outrigger and Cylinder Maintenance and Troubleshooting������������������������� 185
Outrigger Position Sensors������������������������������������������������������������������������� 185
Lift Cylinder������������������������������������������������������������������������������������������������� 186
Outrigger Cylinder��������������������������������������������������������������������������������������� 189
Rotation Gear and Gearbox ������������������������������������������������������������������������ 196
Removal/Installation of Rotation Gear and Gearbox����������������������������������� 196
Inspection of Rotation Bearing Clearance �������������������������������������������������� 198
Backlash Adjustment �������������������������������������������������������������������������������� 200
Repairs-Adjustments-Remarks Log ����������������������������������������������������������� 201
11. Appendix........................................................................................ 203
Conversion Tables �������������������������������������������������������������������������������������� 203
Average Weight of Materials ����������������������������������������������������������������������� 207
Torque Specs -SAE & Metric����������������������������������������������������������������������� 209
Greer Insight Operation’s Manual ��������������������������������������������������������������� 211
12. Notes & Warranty .......................................................................... 213

9
Introduction
Construction and Industrial Equipment Product Safety
It is the responsibility of the owner of the equipment to be knowledgeable about federal, state and local
regulations that effect the total usage of the equipment, and responsibility to working personnel and the
public� Since regulations are subject to change, and also differ from one locality to another, this manual
makes no attempt to provide such information�
Load King provides appropriate operation and maintenance manuals for various construction and
industrial equipment products that it manufactures and sells� In addition, where applicable, appropriate
national consensus standards, industry standards and safety related manuals are included with the
Load King manuals in the shipment of each product� It is company policy to provide this information for
the owner or user of the equipment� It is expected that the owner or user will utilize these manuals and
standards to provide the appropriate information and training to those people who are to operate,
maintain and supervise the use of equipment�
Construction and industrial equipment is designed and manufactured to perform heavy-duty work�
Under normal usage, the equipment will wear� For this reason it is essential that the owner/ user establish
and perform a periodic inspection of the equipment� The objective of inspection programs is to prevent
accidents, reduce downtime and keep the equipment working efficiently� These inspection programs
should be designed to discover worn, cracked, broken or deteriorated parts and loose or missing
fasteners before they result in a problem�
Proper training and inspection programs are essential to avoiding injury to persons, damage to property
and excessive maintenance costs�
Read and understand the manuals provided with this equipment� Assistance is available from the
distributors of your Load King product and from the Load King manufacturing facility�
When operating a hydraulic crane, the operator should realize that hydraulic and
structural competence, NOT TIPPING LOAD, is often the determinant of lifting capacity�
Therefore, THE OPERATOR MUST BE GUIDED SOLELY BY THE APPROPRIATE
MANUFACTURER’S LOAD RATING CHART when considering load weights� The
manufacturers rated loads must never be exceeded�
Follow the recommended operating and maintenance procedures and keep your machine operating
at MAXIMUM EFFICIENCY� Use the Suggested Inspection Check List provided� In addition, a
MAINTENANCE LOG should be kept in conjunction with all maintenance performed on the machine�
If you desire any special information regarding the care and operation of the machine, we will gladly
furnish it upon request� We ask that you include your machine model and serial number in all
correspondence so that we can provide the correct information�
The information, specifications, and illustrations in this publication are based on the information in effect
at the time of approval for printing� We reserve the right to make changes at any time without obligation�

10
35-127 M
Introduction
35-127 M Nomenclature
This manual contains instructions and information on the operation, maintenance,” lubrication and
adjustments of the Boom Truck� The operator should not attempt to operate” the machine before he has
gainedathoroughunderstandingofthematerialpresentedin”thefollowingpages�Toaidinunderstanding
the contents of this manual, the following” terms will always have the meanings given whenever they are
used�
1� TURRET The turret weldment and swing mechanism�
2� BOOM The telescopic boom with hydraulic winch, lift cylinder, hook
block assembly, and jib arrangement�
3� PEDESTAL The structure that supports the turret weldment, outriggers, and
operator platforms on the truck�
4� FLATBED The deck of the Boom Truck�
5� SUBFRAME The frame of the crane that is mounted to the truck chassis and
supports the flatbed and pedestal�
6� OUTRIGGERS The beams, cylinders, floats, boxes, hydraulic control system�
7� TRUCK The vehicle that all boom and operator structures are mounted on�
RIGHT HAND/LEFT HAND All references to right or left hand will correspond to the
operator’s right or left hand when he is facing forward from the
operator’s platform, with the truck cab to his back�
2
1
7
4
3
6
65

11
Standards
Many aspects of crane operation and testing are discussed in standards published by the American
National Standards Institute� These Standards are updated on an annual basis with addendum, which
are sent by American Society for Mechanical Engineers (ASME) to the original purchasers of the standard�
Load King recommends that you purchase and refer to the following standards:
ANSI/ASME B30�5 – Mobile & Locomotive Crane (Latest Version)
These standards may be purchased by:
Mail: American Society of Mechanical Engineers”
Customer Service Department
22 Law Drive
Fairfield, New Jersey 07004
Phone: 800�843�2763
Internet: www�asme�org
Copyright
This manual is intended for use by personnel responsible for operation, maintenance, repair and
supervision activities involving the machine described within�
This manual is copyrighted� It shall not, either in whole or in part, be reproduced, transmitted, or used
for the purpose of competition without our prior written consent�

12
35-127 M
Introduction
Intended Use
This mobile crane is designed to lift, lower, move, and position freely suspended loads within its rated
capacity while on firm, level ground� The crane is designed exclusively for assembly type, non-duty cycle
operations� Use of this product in any other way is prohibited and contrary to its intended use�
Other crane applications outside of the intended use statement above must be approved in writing by
Load King Cranes�

13
Bulletin Distribution and Compliance
Safety of product users is of paramount importance to Load King� Various bulletins are used by
Load King to communicate important safety and product information to dealers and machine owners�
The information contained in bulletins is tied to specific machines using the machine model number and
PIN/serial number�
Distribution of bulletins is based on the most current owner of record along with their associated dealer,
so it is important to register your machine and keep your contact information up-to-date�
To ensure safety of personnel and the reliable continued operation of your machine, be sure to implement
the action indicated in a respective bulletin�

14
35-127 M
Introduction
Contacting Manufacturer
At times it may be necessary to contact the manufacturer of this machine� When you do, be ready to
supply the model and PIN/serial number of your machine, along with your name and contact information�
At minimum, the manufacturer should be contacted for:
• Accident Reporting
• Questions regarding product applications and safety
• Standards and regulations compliance information
• Questions regarding product modifications
• Current owner updates, such as changes in machine ownership or changes in your contact
information (see Transfer of Machine Ownership, in this chapter, for more information)�
Manufacturer contact information:
Load King
7701 Independence Ave, Kansas City, MO 64125
Parts: (816) 241- 8387
Service: (833) 281-7911
info@loadkingmfg�com
https://store�loadkingmfg�com

15
Transfer of Machine Ownership
Complete the New Owner Registration Form on the following page� The Model Name, Product
Identification Number (PIN), and serial number is located on a plate inside the operator’s cab� The six-
digit serial number is shown on a plate on the outside of the operator’s cab�

LOAD KING WARRANTY DATA RECORD
Warranty Form Submission Date
Date of Delivery
Model Number
S/N
Dealer
Address
Customer
Address
Record this informaon at the me that warranty registraon form is completed and returned to Load
King.

17
Safety
Safety Introduction
Owners, Users, and Operators:
Load King appreciates your choice of our machine for your application� Our number one priority is user
safety, which is best achieved by our joint efforts� We feel that you make a major contribution to safety
if you, as the equipment users and operators:
1� Comply with OSHA, Federal, State, and Local Regulations�
2� Read, Understand, and Follow the instructions in this and other manuals supplied with this
machine�
3� Use Good, Safe Work Practices in a common sense way�
4� Only have trained and competent operators, directed by informed and knowledgeable
supervision, running the machine�
OSHA prohibits the alteration or modification of this crane without written
manufacturer’s approval� Use only factory-approved parts to service or repair this
unit�
If there is anything in this manual that is not clear or you believe should be added, please send your
comments to Load King Cranes, 7701 Independence Ave, Kansas City, MO 64125; or contact us by
telephone at Parts: (816) 241- 8387 Service: (833) 281-7911�
Email: info@loadkingmfg�com�
THIS SYMBOL MEANS YOUR SAFETY IS INVOLVED! READ, UNDERSTAND,
AND FOLLOW ALL DANGER, WARNING, AND CAUTION DECALS ON YOUR
MACHINE�
Many aspects of crane operation and testing are discussed in standards published by the American
National Standards Institute� These Standards are updated on an annual basis with addenda, that are
sent by ASME to the original purchasers of the standard� Load King recommends you purchase and refer
to the following standards�
ANSI/ASME B30�5 - Mobile & Locomotive Crane (Latest Version)
These standards can be purchased from:
American Society of Mechanical Engineers
Two Park Avenue
New York, NY 10016-5990
800-843-2763 (U�S/Canada)
001-800-843-2763 (Mexico)
973-882-1170 (outside North America)
Email:
CustomerCare@asme�org
www�ASME�ORG/SHIP/STANDARDS

18
35-127 M
Safety
Product Safety Decals
ANSI HAZARD CLASSIFICATION SYSTEM
A multi-tier hazard classification system is used on machine safety signs to communicate potential
personal injury hazards� The following signal words used with the safety alert symbol indicate a specific
level of severity of the hazard� All are used as attention-getting devices on decals and labels affixed to
the machine to assist in hazard recognition and prevention�
1� DANGER - Indicates a hazardous situation that if not avoided, will result in death or serious injury�
2� WARNING - Indicates a potentially hazardous situation that if not avoided, could result in death or
serious injury�
3� CAUTION - Indicates a potentially hazardous situation that if not avoided, could result in minor or
moderate injury�
4� NOTICE - Indicates information considered important , but not hazard-related (e�g�, messages
related to property damage)�

19
SYMBOLS AND PICTORIALS
Hazard Avoidance
CRUSH HAZARD
Crushing of fingers
or hand - force
applied two
directions (pinched)�
Stay Clear of
Moving Turret and
Boom�
CRUSH HAZARD
Death or Serious
Injury can result
from contact with
moving machine�
Keep clear of
moving machine�
Safety Alert Symbol Use personnel lift in
compliance with
OSHA and ANSI
regulatory
instructions�
Skin Injection from
High Pressure Fluid�
Use Cardboard or
Wood to Check for
Leaks�
Falling from
Wheeled Machine�
NO RIDERS

20
35-127 M
Safety
Hazard Avoidance
Hand Entanglement
in Pulley / Winch�
Keep Hands Clear
of Winch and Load
Line�
Entanglement in
Drive Shaft�
Stay Clear of
Rotating Shafts�
ENTANGLEMENT
HAZARD
Rotating parts can
cause personal
injury�
Keep away from fan
and belt when
engines running�
Stop engine before
servicing�
Explosion / Burn
Hazard
Will cause death,
burns or blindness
due to ignition of
explosive gases or
contact with
corrosive acid�
Keep all open
flames and sparks
away� Wear
personal protective
equipment,
including face
shield, gloves and
long sleeve shirt�
READ MANUALS
Read all manuals
prior to operation�
DO NOT OPERATE
equipment if you do
not understand the
information in the
manuals�
Table of contents
Other LOAD KING Construction Equipment manuals
Popular Construction Equipment manuals by other brands

Dawson
Dawson EMV-300 Operator's instructions/Spare parts list

Panasonic
Panasonic EY3640 operating instructions

Central Hydraulics
Central Hydraulics 07620 Assembly and operating instructions

probst
probst BSZ-KH-7.5 operating instructions

Manitowoc
Manitowoc MLC165 Product guide

Altrex
Altrex MiTower Safety and assembly instructions