LOBSTER SPORTS Grand 20 Setup guide

Author: JJ Contributors: CT, JR Date: 6/7/2023 Revised:
Replacing and Installing Grand 20 Apple Wi-fi Remote Control.
Repair Instructions
Step
Description
Tools
Picture
Models that Apply: Elite Grand 4, 5, 5-LE, Pickle 3 Champion
Unscrew the (4) screws that attach the control panel to the
red case.
Take the plastic cover off of the Velcro, and stick it on the
Left side of the case. (With the wires pointing toward the
control panel).
Receiver being placed on Left
hand side of the Red Case.

Author: JJ Contributors: CT, JR Date: 6/7/2023 Revised:
Replacing and Installing Grand 20 Apple Wi-fi Remote Control.
Repair Instructions
Plug the Wi-Fi red and white wire (coupling) with the female
4-pronged housing.
Connect the 3 pinned black and Green wire to the 3 pinned
slot on the control panel titled “J6”.
Remote spot on control panel.
Remote Receiver connected to
Remote terminal on control
panel.
3 Pronged J6 connection on
control panel.

Author: JJ Contributors: CT, JR Date: 6/7/2023 Revised:
Replacing and Installing Grand 20 Apple Wi-fi Remote Control.
Repair Instructions
Screw the control board back onto the case.
Please follow the instructions below to Test the Wi-Fi.
Note:
Make sure your Control Panel has Software version:
1.207.11, 1.214.11, or 1.218.34.
Go to settings and click on “Wi-Fi” connections.
Your device will detect the network called “LobsterSports-
xx”. Select this network. Note: xx is a number unique to your
machine.
For this network, press the > to adjust its settings:
a) Make sure your device is set up to detect
“LobsterSports-xx” automatically by setting your
‘AutoJoin’ button to ON.
b) Click on your Lobster Remote icon on your
iPhone/iPad device. Please allow anywhere from 30
seconds to 1 full minute for your machine and phone
to properly acknowledge each other! Your Lobster
app will tell you when you are ready to go.