Loft Cat Condo User manual

LOFT Cat Condo
read first REVIEW BEFORE
ASSEMBLY
• Designed for hand assembly.
No tools required.
•Check regularly to ensure all
components are connected.
• Place finished unit in an area
with room for cats to play and
interact with all features.
very helpful tips
• Loosely lay out all parts for each step.
• Slide tubes into fabric sleeves first—then add connectors.
• Use appropriate force when assembling connectors and tubes
to avoid unnecessary damage.
connectors & parts
4 C
(6pcs)
3 C
(4pcs)
3 S
(6pcs)
A35
Long Tub
(12pcs)
A16
Short Tub
(6pcs)
M1
Plush Mat
(1pcs)
L2
Hid away
with Ramp
(1pcs)
B40
Long Curv d Tub
(2pcs)
B31
Curv d Tub
(6pcs)
A1
Sisal Post
(1pcs)
R2
Hid away
Arch
(1pcs)
3 C
3 S
3 S
3 S
3 C
3 S
3 C
3 C
Aft r th bas has b n
ass mbl d and firmly
tight n d, add th v rtical
tub s and Sisal post.
1
PARTS NAME QTY
3 S 3-Way Straight ( 4 )
3 C 3-Way Corner ( 4 )
A35 Long ube ( 5 )
A16 Short ube ( 4 )
Foam Pads ( 8 )
To fo m the BASE, you will
need these pieces:
To finish the base, you will
need these pieces:
PARTS NAME QTY
A35 Long ube ( 1 )
A16 Short ube ( 2 )
A1 Sisal Post ( 1 )
Lay out th compon nts out on
th floor, th n ins rt tub s into
conn ctors to ass mbl th bas .
Foam foot r pads
(8pcs)
S lf-adh siv foam pads
(if us d) should b plac d
on th und rsid of all
ight conn ctors.

CARE INSTRUCTIONS
• Do not imm rs in wat r or plac
n ar high h at or op n flam .
• R gularly ch ck th stability of
all conn ctions of compon nts.
• Spot cl an fabric and fram with
a moist tow l. Allow to air dry
thoroughly.
• Sup rvis p t int raction with th
product. Insp ct for w ar. R plac
wh n worn.
4 C
4 C
4 C
4 C
4 C
4 C
3 S
B40
B31
B40
3 S
B31
Ori nt th B40 curv tub s
v rtically. Th long r
portion cr at s th h ight
of th op ning.
Aft r th hid away
is ass mbl d and
firmly tight n d,
add it to th bas .
Aft r th hid away arch
is ass mbl d, add it to
th low r hid away, and
ins rt th plush mat.
2
PARTS NAME QTY
4C 4-Way Corner ( 6 )
A35 Long ube ( 5 )
B31 Curved ube ( 4 )
L2 Hideaway w/Ramp ( 1 )
To fo m the HIDEAWAY WITH
RAMP, you will need these
pieces:
3
PARTS NAME QTY
3S 3-Way Straight ( 2 )
A35 Long ube ( 1 )
B40 Long Curved ube ( 2 )
B31 Curved ube ( 2 )
R2 Hideaway Arch ( 1 )
M1 Plush Mat ( 1 )
To fo m the HIDEAWAY ARCH,
you will need these pieces:
REMINDER: Inse t tubes into the
fab ic fi st, th n add conn ctors.
⁕