Logik L10SRDB09 User manual

Multimedia Shredder 21 Litre
L10SRDB09
QUICK START GUIDE
Product Overview
Congratulations on the
purchase of your new
PC Line Shredder. Before
commencing the operation,
please check that you have
all the items and familarise
yourself with this Quick Start
Guide.
Operating Switch
Credit Card and
CD/DVD Feed
Max. 10 sheets
CD/DVD and credit card inlet
AUTO OFF REV
Part List
Credit Card
and CD/DVD
Bin (x1)
Paper Feed
Shredder Bin
Logik Shredder_SHD003_091022.ind1 1 22/10/09 3:28:15 PM

GB-2
Preliminaries
This product is built to shred paper, credit cards and CDs/DVDs. It is not built to take
staples, paper clips, continuous forms, adhesive labels, transparencies, newspaper,
cardboard or any plastic other than credit cards and CDs/DVDs. Using it for these
purposes is likely to cause irreparable damage.
Capabilities Crosscut
Sheet Capacity* 10 (80gsm A4 size paper)
Credit Card/CD/DVD Capacity 1
Paper Shred Size 4 x 45mm
Credit Card/CD/DVD Size 30mm (in strip)
Continuous Operation 3 minutes
*A4 (80g) paper at 230v, 1.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity.
Operation
Operating Switch must be in the AUTO position to operate the shredder. Insert waste
bag for easy disposal.
What to do if...
Paper jam: Set to OFF, remove shredder head and empty the bin. Place back the
shredder head and follow any or all of the below procedures.
Continuous Operation:
3 minutes maximum
NOTE: Shredder rungs briey
after each pass to clear
entry. Continuous
operation beyond 3
minutes will trigger
60 minutes cool down
period.
Set to OFF and plug in
Check paper amount
Set to AUTO
Feed into paper entry
and release
AUTO OFF REV
AUTO OFF REV
Set to REV for 2-3 seconds Alternate slowly back and forth Set to OFF for 2 to 3
seconds
Set to REV position
again to ensure
no paper pieces
trapped in the
shredder head

AUTO OFF REV
AUTO OFF REV
AUTO OFF REV
AUTO OFF REV
AUTO OFF REV
Logik Shredder_SHD003_091022.ind2 2 22/10/09 3:28:21 PM

GB-3
Keep away from children and pets. Keep hands away from paper entry. Always
unplug or set safety lock when not in use.
Keep foreign objects - gloves, jewelry, clothing, hair, etc. away from shredder
operatings. If object enters top opening, switch to REV to back out object.
Never use aerosol, petroleum based or other ammable products on or near
shredder. Do not use canned air on shredder.
Do not use if damaged or defective.
Do not open shredder head: Danger of electric shock.
Do not place the shredder near or over heat or water source.
Maximum 10 sheets per pass to avoid jams.
Avoid touching exposed blades under the Stripcut shredder head.
The mains socket should be installed near the shredder and should be easily
accessible.
Always turn o and unplug the shredder when not in use.
Unplug before emptying the bin.
•
•
•
•
•
•
•
•
•
•
•
Important Safety Instructions - Read Before Using!
Shredder doesn’t start:
Make sure the Shredder head is on the bin correctly.
Wait 60 minutes for motor to cool down.
Remove and empty the bin.
Maintenance and Cleaning
The shredder bin should be emptied regularly. Never let the bin become overfull
with paper, otherwise the opreation of the shredder may be aected.
Before emptying the bin, always unplug the shredder and place it in a safe place.
If the bin gets soiled, it can be washed in water, rinsed and dried.
The shredder housing can be cleaned with a cloth very lightly dampened
with a mild soap and water solution after the unit has been switched o and
unplugged from the mains. Do not reconnect the shredder until it has dried
fully.
NEVER allow water solution or liquids to penetrate the shredder.
Regular oiling of the shredder is also necessary to ensure proper performance.
If you are running the shredder at or near capacity, we recommend oiling it
monthly. Use non-aerosol vegetable-based oil in a long nozzle container.
Do not use ammable synthetic oil, petroleum-based products or aerosol
lubricants of any kind in or near the shredder at any time.
•
•
•
•
•
•
•
•
•
•
Logik Shredder_SHD003_091022.ind3 3 22/10/09 3:28:21 PM

Visit Partmaster.co.uk today for the easiest way to buy electrical spares
and accessories.
With over 1 million spares and accessories available we can deliver direct to
your door the very next day.
Visit www.partmaster.co.uk
or call
0870 6001 338
(UK customers only)
Calls charged at National Rate
Note: If you require a replacement for any of the items listed below, please quote
their corresponding part numbers.
Item Part Number
Quick Start Guide 08051C4A0136001
Shredder Bin 0601MQ262000000
Credit Card and CD/DVD Bin 0203PR006000000
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at teh end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
puchased the prodcut.
Specications
Supply Voltage 230V ~50Hz
Rated current 1.5A
Net Weight 4.8kg
Logik Shredder_SHD003_091022.ind4 4 22/10/09 3:28:22 PM