Logitech c925e User manual

C925eBUSINESS WEBCAM
Complete Setup Guide
Guide d'installation complet

CONTENTS
English . . . . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . . . . .7
Español . . . . . . . . . . . . . . . . 11
Português . . . . . . . . . . . . . . 15

KNOW YOUR PRODUCT
Built-in privacy
shutter
LED activity light
Universal
mountingclip
Built-in privacy
shutter
Tripod thread*
Dual microphone
Autofocus
HD1080p lens
USB-A cable
* Tripod not included
3English

USB-A
WHAT’S IN THE BOX
1 Webcam with 6 ft (1.83 m) attached USB-A cable
2 User documentation
CONTROLLING THE BUILT-IN PRIVACY SHUTTER
1 C925e is designed with an integrated privacy shutter.
The slider to open/close the shutter is located on top
of the webcam, directly above the camera lens.
2 To open the privacy shutter, move the slider
totheleft.
3 To close the privacy shutter and cover the lens,
movethe slider to the right. The lens will appear white
when the privacy shutter is closed.
4English

* Tripod not included
SETTING UP THE WEBCAM
For placement on a monitor
1 Place your webcam on a computer, laptop or monitor
at a position or angle you desire.
2 Adjust the webcam to make sure the foot on
theuniversal mounting clip is ush with the back
ofyour device.
3 Manually adjust the webcam up/down to the best
position to frame yourself.
For placement on a tripod*
1 Locate the ¼ inch tripod thread on the bottom
oftheuniversal mounting clip.
2 Secure the webcam on your tripod by twisting it
intothe ¼ inch thread.
3 Place your webcam with the tripod anywhere
youdesire to the best position to frame yourself.
5English

INCLUDING FIXED MOUNTING CLIP:
Height x Width x Depth:
2.9 in (73 mm) x 5.0 in (126 mm) x 1.8 in (45 mm)
Cable Length: 6 ft (1.83 m)
Weight: 6.0 oz (170 g)
DIMENSIONS
www.logitech.com/support/C925e
© 2021 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech
Europe S.A. and/or its aliates in the U.S. and other countries. Logitech assumes noresponsibility
for any errors that may appear in thismanual. Information contained herein issubject to change
without notice.
SUCCESSFUL CONNECTION
LED activity light will light up when the webcam
isinuseby an application.
CONNECTING THE WEBCAM VIA USB-A
Plug the USB-A connector into the USB-A port
onyourcomputer.