
Lock-On Mode
The MT4300 has the ability to lock in a selected single, true pair or report pair while in Manual Mode.
Press and hold theTrue Pair
button for 5 seconds, until
Singles Mode activates
Single Target
Report Pair
True Pair
Press the trap button to arm
controller
Request target with microphone and
the selected trap will fire. The trap
will re-arm after 5 seconds.
Manual Mode
1st 2
2nd _
Choose Trap #
Request the targets with the microphone
and the selected traps will fire. The traps
will re-arm after 5 seconds.
-To exit Lock-On Mode, press the Back/On button.
-Advance through 5-Stand and Compak menus using voice
operation.
-Voice operation is not available in FITASC or Flush modes.
Request the first target with the
microphone and the second
target will fire on the report of the
gun. The same pair will re-arm
after 5 seconds
Press the first and second trap
numbers to arm the controller
Report Mode
1st 1
2nd 2
Important Information
V
Manual Mode
1st _
2nd _
Choose Trap #
*V
Manual Mode
1st _
2nd _
Choose Trap #
*V
V
Select the traps you would like
to see in the true pair
Report Mode
1st 1
2nd 2
VTrue Pair Mode
1st 1
2nd 2
V
Singles Mode
1st 2
2nd _
Choose Trap #
V
Press and hold theTrue Pair
button for 5 seconds to enter
True Pair Mode
Press and hold theTrue Pair
button for 5 seconds until the
asterisk appears
Press and hold theTrue Pair
button for 5 seconds until the
asterisk appears