Lorex LNR100 SERIES Operator's manual

1C
Quick Mobile Guide
Android
d
e
Tap Start Live Preview. You will be prompted to change
the NVR password.
f
Enter a new 6 character password and tap OK. This password
will be used to log on to your system from now on.
The app opens in Live View and streams video from all
connected cameras.
Before You Start:
• Make sure you have a router and
high-speed Internet access (not
included).
LNR100 Series
Install the free FLIR Cloud™ app from the
Google Play Store. Tap the FLIR Cloud™ icon to
open the app.
a
b
cConfigure the following:
iPhone
1A
Congratulations! You can now view video from your cameras on your smartphone or tablet.
3 Minutes
iPad
c
dConfigure the following:
1
2
3
4
5
e
f
g
Install the free FLIR Cloud™ app from the App
Store. Tap the FLIR Cloud™ icon to open the app.
a
b
Tap Start Scanning and line up the
QR code on the top of the NVR using the
camera on your device.
OR under Device ID, manually enter the
Device ID printed on the label.
Name: Choose a name for your NVR of
your choice.
Client Port: Enter the Client Port
(default: 35000).
User Name: Enter the NVR’s User
Name (default: admin).
Password: Enter the NVR’s Password
(default: 000000).
Channel amount: Enter the number of
channels your NVR has.
1B
• Connect your NVR to your router
using an Ethernet cable (see the
Quick Connection Guide for details).
• Upgrade your NVR firmware and
client software or mobile app to the
latest versions.
• Please note that an upload speed of
1Mbps is required for remote video
streaming. Up to 3 devices may
connect to the system at the same
time.
1
2
3
4
Tap Scan QR Code and line up the QR code on
the top of the NVR using the camera on your device.
OR under Device ID, manually enter the Device ID
printed on the label.
Name: Choose a name for your system of your
choice.
Client Port: Enter the Client Port
(default: 35000).
Username: Enter the NVR’s User Name
(default: admin).
Password: Enter the NVR’s Password
(default: 000000).
1
3
4
5
2
EXAMPLE EXAMPLE
Tap Then tap +
5
d
f
Tap Start Live Preview. You will be prompted to change
the NVR password.
g
Enter a new 6 character password and tap OK. This password
will be used to log on to your system from now on.
The app opens in Live View and streams video from all
connected cameras.
Install the free FLIR Cloud™ app from the App
Store. Tap the FLIR Cloud™ icon to open the app.
a
b
cConfigure the following:
1
2
3
4
Tap Scan QR Code and line up the QR code on
the top of the NVR using the camera on your device.
OR under Device ID, manually enter the Device ID
printed on the label.
Name: Choose a name for your system of your
choice.
Client Port: Enter the Client Port
(default: 35000).
Username: Enter the NVR’s User Name
(default: admin).
Password: Enter the NVR’s Password
(default: 000000).
1
3
4
5
2
EXAMPLE
Tap Then tap +
5
Tap Add.
Tap Start Live Preview. You will be prompted to change
the NVR password.
Enter a new 6 character password and tap OK. This password
will be used to log on to your system from now on.
The app opens in Live View and streams video from all
connected cameras.
Tap Then tap
6
1
2
3
4
5
6
Device ID: xxxxxxxxxxx Device ID: xxxxxxxxxxx
Device ID: xxxxxxxxxxx

Find your Device ID
Record your information below:
DEVICE ID:
Quick
Reference
Default access information:
• Default user name: admin
• Default password: 000000
Default system ports:
• HTTP Port: 80
• Client Port: 35000
Information in this document is subject to change without notice. As our products are subject
to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to
modify product design, specifications and prices, without notice and without incurring any
obligation. E&OE © 2014 LOREX. All rights reserved.
lorex.ca/LNR100
It’s all on the Web
Need Help?
Visit www.lorextechnology.com/support
LNR100_SERIES_QNG_EN_R1
If you have forgotten your
password, contact
Lorex technical support.
2
b
Download the Client Software for PC from
lorex.ca/LNR100.
a
Once installation is finished, double-click the FLIR
Cloud Client™icon ( ) on the desktop.
d
1
2
3
4
5
1
2
3
4
5
Enter the following information:
3Connecting on PC
Quick PC Guide
Congratulations! You can now connect over the Internet to view
and playback video on your PC.
15 Minutes
The Device ID is printed on a label on the top panel of the NVR.
See the label on top of
your NVR for your
Device ID.
NOTE: For Mac
software downloads and
instructions, please visit
lorex.ca/LNR100.
Scan the QR code or visit the address below to access
the latest software and instruction manuals.
Device ID: xxxxxxxxxxx
cLog into the Client Software using the Client Software
user name (default: admin) and password (default:
admin) and then click Login.
User Name: admin
Password: admin
Click Add Device
c
Device Name: Choose a name for your system of your choice.
Device ID: Manually enter the Device ID printed on the label.
Client Port: Enter the Client Port (default: 35000).
User Name: Enter the NVR’s User Name
(default: admin).
Password: Enter the NVR’s Password
(default: 000000).
eYou will be prompted to change the NVR
password. Click OK.
fEnter a new 6 character password and tap
OK. This password will be used to connect to
your system from now on.
Click Add
gClick then .
hClick and drag Default Group to the display
window to open your cameras in live view.
EXAMPLE