LOUDLINK LLK-A08BLUE User manual

LLK-A08BLUE
LLK-B08BLUE
LLK-A09BLUE
LLK-B09BLUE
LLK-LTHBLUE
LLK-M36BLUE
Installation Guide
Dear Custo er!
Thank You for purchasing Loudlink
products! We hope You will be satisfied,
since Your satisfaction is our pri ary
objective.
What you need for Loudlink installation:
Loudlink Bluetooth Handsfree Car
Kit with Microphone
CD Changer cable – if not factory
fitted already
Mount the Microphone to the upper
corner on driver's side with the included
double sided tape.
Connect the 3.5 Jack plug of
Microhpone to Loudlink.
Connect CD Changer cable to Loudlink.
The integrated charger operates when
head unit is on. For charging si ply
connect the USB charger cable of Your
obile device to Loudlink.
Bluetooth device pairing
Switch head unit to “CD Changer”, than
navigate to CD2.
„Previous Track” (<<) button
disconnect the already connected
obile device.
“Next Track” (>>) button
disconnect the already connected
obile device, and start pairing an
another one.
Please be patient, within few seconds
You'll see „Loudlink CarKit” in Bluetooth
devices list.
Pair with “0000” PIN code, and switch
head unit back to CD1.

After succesful paring, you can anage
your calls, navigate within ulti edia
sources (audio, video, online radio, etc.)
using factory fitted steering wheel re ote
control buttons (if have), and / or head
unit CD Changer control buttons.
During media playback the following
functions are available on CD1:
“Previous Track” (<<)
play the previous track
„Next Track” (>>)
play the next track
„Track Fast Rewind” (<<<)
activate voice recognition functions on
mobile device if have.
“Track Fast Forward” (>>>)
call the last dialed phone number
During call the following functions are
available on CD1:
“Previous Track” (<<)
reject the incoming call or hang-up the
current call, or terminate the outgoing
call
„Next Track” (>>)
answer to the incoming call
After call the edia playing will continue
fro the interrupted position!
Firmware upgrade
Not yet supported.
Cable installation
If CD Changer cable is not installed
already in Your car, You need to re ove
the head unit. This process requires
special tools. We highly reco end you
to go to an authorized garage, where
professionals can re ove the head unit
and afterwards connect the cable.
If You are able to re ove head unit, just
si ply connect the blue „Mini-ISO”
connector to the socket of the back side
of the head unit.
You are finished! Enjoy the sound! Have
great iles!
Loudlink Tea