Lowrance HDS-5 User manual

Function keys
Zooms out the Radar, Sonar and Chart pages.
ZOUT
Zooms in the Radar, Sonar and Chart pages.
ZIN
Press to return to a previous screen, clear data and close
menus. Pressing Exit on the Chart page will quickly switch
between displaying the boat symbol and the last cursor
position.
EXIT
Press to save data, change values and accept menu
commands; also acts as a short cut key for important
functions such as saving a waypoint at the cursor position
on the Chart page.
ENTER
Accesses the features available on each page.
MENU
Press to select the page (screen) to display or to access utilities such as the
waypoints list and les. Press and hold to switch control between the panels on
combo (split screen) pages.
PAGES
Press to turn the unit on, adjust the backlight or place the unit in low power
(standby) mode. Press and hold to turn the unit off.
LIGHT
POWER
Activates cursor on Chart page. Press up, down, left or right to move the cursor.
Arrow
Keypad
Press to save a waypoint at your current GPS position. Press and hold to search
for waypoints and other points of interest (POI's) or quickly access waypoints,
routes and trails.
WPT
FIND
Creating a Man Overboard (MOB) position:
Press the ZOUT and ZIN keys at the same time to create a MOB waypoint with a line to
your boat position.
Quick Start Guide
HDS-5 & HDS-7
*988-10142-001*
EN

To view a page:
1. From any screen press PAGES to access the Pages screen.
2. Select the desired page display.
To adjust Panel sizes on a Combo page:
1. From the Pages screen, select the desired Combo page and press the
MENU key. Selecting Sonar + Chart will display a Sonar-Chart combo
page.
2. Select Adjust panel sizes. Use the on-screen button to adjust the panel size.
Pages screen
NOTE: Hold down the PAGES key to switch active panels when
viewing a combo page.
To Create Waypoint at current position:
1. Press the WPT/Find key to create a waypoint at the your current position.
To Create Waypoint at the cursor position on Chart or Sonar page:
1. Place the cursor on the Chart page
where you want to set the waypoint
and press the ENTER.
2. Select Save from the New Waypoint
menu and press ENTER.
Waypoints

Press the keypad to the left to scroll the Sonar page back to view previous sonar re-
turns. When the cursor is onscreen the sonar does not show real time sonar returns.
Press EXIT to return to normal operation.
Sonar (Sonar units only)
Cursor
Cursor depth Fish arches
Information at
cursor's position
History bar Amplitude
scope
Range scale
To Navigate to the cursor:
1. From the Chart page, center the cursor
over a point of interest and press MENU.
2. Select Go to Cursor and press ENTER.
To cancel navigation:
1. From the Chart menu select Navigation
and press ENTER.
2. Select Cancel and press ENTER.
Go To Cursor / Cancel Navigation

Sonar display settings/options
To adjust Sensitivity and Colorline:
1. From the Sonar page press the MENU key.
2. Select Adjust and press ENTER.
3. Press the keypad up/down to select Sensitivity or Colorline. Press the
keypad left/right arrows to make adjustments.
Fishing Modes
Enhances the performance of your unit by providing preset packages of sonar
settings geared to specic shing conditions.
Sonar page Split screen options
To select a Split screen display:
1. From the Sonar page press MENU.
2. Select Sonar options and press ENTER.
3. Select Split to open the Split menu.
4. Select the desired split screen and press ENTER.
Transducer Type
Selecting the proper transducer type from the sonar installation menu helps
optimize HDS performance by enabling settings (temperature and frequency) and
menu options specic to your transducer.
To select a Transducer Type:
1. Press MENU twice.
2. Select Sonar and press ENTER.
3. Select Installation and press ENTER.
4. Select the desired transducer type and
press ENTER.
5. Highlight Save and press ENTER.
Transducer type menu

When the HDS is connected to a SonicHub server you can use your HDS unit to
control audio playback from iPod, iPhone, USB mass storage device (mp3) and
AM/FM radio.
Enabling audio
You must enable Audio on your display unit’s settings menu
to control audio playback with your unit.
The media bar panel will not be visible until audio has been
enabled.
SonicHub media bar panels
The media bar panel varies from one audio source to another, see examples below:
SonicHub
Artist
Audio
source Track
Time
remaining
Shufe
indicator
Repeat
indicator
Volume
level
Signal
strength
Volume
level
Audio
source Station
RDS
Display
NOTE: Hold down the PAGES key (2 seconds) to switch between active
panel and SonicHub operation.

Operating SonicHub audio
When the media bar is the active panel, press the MENU key to access the
SonicHub menu. Adjustments to SonicHub audio playback settings can be made
from the SonicHub menu, function keys and the keypad.
Volume control, song and station selection, favorites and audio source can be
adjusted/accessed using your units function keys and keypad. Shufe and Repeat
features (iPod, iPhone and USB Mass Storage) must be turned on/off on the
SonicHub menu.
Function key controls
ZOOM IN — Increase Volume
ZOOM OUT — Decrease Volume
ENTER — Mute
Keypad Controls
iPod, iPhone, USB Mass Storage AM/FM radio
Scroll forward
through favorites
Next
station
(AM/FM
— tune
forward)
Previous
station:
(AM/FM
— Tune
backward)
Scroll backward
through favorites
Audio Source
Previous
track Next track
Play/Pause
NOTE: When listening to AM/FM radio, press and hold the keypad left
or right to switch from tune mode to seek mode.
NOTE: When playing audio from an iPod or USB storage device, press
and hold the keypad left or right to rewind or fast forward through a
track.