LOXONE Miniserver Go User manual

Technical Specifications
PowerSupply 5VDC (LPS) via Micro USB
Safety Rating IP20
Humidity 95% r. H. (non condensing)
Maintenance and Cleaning The device is free of
maintenance and may only
be cleaned with a dry cloth.
Radio Frequency 868MHz (SRD Band Europe),
915MHz (ISM Band Region 2)
max. Power 3.16mW
PowerConsumption max. 1.3W
Total Power Loss max. 1.3W
Ambient Temperature 0...50°C / 32…122°F
Dimensions 90x90x20mm /
3.54x3.54x0.79” (LxWxH)
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
V221119
Part No: 100139
Miniserver
Go

About the product
The Miniserver Go is a device for the automatic control and
management of home automation and similar non safety
critical applications. The Loxone Miniserver Go has a fully
integrated Air Base Extension and is perfect for retrofitting
Loxone in existing homes.
Installation & electrical connection
Connect device only to the power supply that is shipped with
the product. Do not connect the device to telecommunication
networks.
If the unit is used in a non conform manner as specified by
the manufacturer the product included safeguards will be
impaired.
For additional information, declaration of confirmity,
visit www.loxone.com/help/miniserver-go
Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired operation
GND
Status
LED
Micro
SD
LAN
Connector
Power via
Micro USB
Link
Specifications
Keep in mind that GND needs to be
connected to the ground of
the 24V Power.
EXT
Link + Link –
EXT
Link +
Link –
EXT
Miniserver Go
GND Link
+ 24V GND
24VDC
Power Supply
N L
120˜ t ermination
resistor
Connect Extension
This folder is a part of the product!
Connection
Push-In-Technology To make connection, insert
wire; to remove the wire,
twist and pull at the same
time
Wire Diameter 0.2...1.5mm² /
AWG24...AWG16
Exposed Wire Length 8mm / 0.31”