LOXONE Touch Nightlight Air Service manual

Versionsnummer: LX001
2019-03-12
1
Inbetriebnahme & Montageanleitung
Touch Nightlight Air
Art. Nr.: 100340
1 | Stromversorgung
2 | Einlernmodus – erster Start
Micro USB
Diffuses
RGBW Licht
US Adapter
UK Adapter
EU Adapter
+ Micro USB & USB
Untere Status LED
Obere Status LED

Versionsnummer: LX001
2019-03-12
2
3 | Loxone Air Gerät einlernen:
https://www.loxone.com/dede/kb/loxone-air-geraet-einlernen/
4 | Verbinden von T5, Wecker und Smartaktor:
https://www.loxone.com/dede/kb/smart-aktor/
https://www.loxone.com/dede/kb/touch-night-light/
5 | Loxone Config:
Aus dem Peripheriebaum, den Baustein “Touch Nightlight” in die Loxone Config ziehen
6 | Baustein Wecker konfigurieren:
https://www.loxone.com/dede/kb/wecker/
7 | Funktionsbeschreibung
https://www.loxone.com/dede/kb/touch-night-light/
Published by
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
Tel: [phone]
loxone.com

Versionsnummer: LX001
2019-03-12
3
Commissioning and installation instructions
Touch Nightlight Air
Part No.: 100340
01 | Power supply
02 | Learn-in Mode – 5 seconds key T7
Micro USB
Diffused
RGBW Light
US Adapter
UK Adapter
EU Adapter
+ Micro USB & USB
LED Light
LED Light

Versionsnummer: LX001
2019-03-12
4
03 | Learn-in Loxone Air device:
https://www.loxone.com/dede/kb/loxone-air-geraet-einlernen/
04 | Connecting T5, alarm clock and smart actuator:
https://www.loxone.com/dede/kb/smart-aktor/
https://www.loxone.com/dede/kb/touch-night-light/
05 | Loxone Config:
Pull the “Touch Nightlight Air” module from the peripheral tree into the Loxone Config:
06 | Configure alarm clock module
https://www.loxone.com/dede/kb/wecker/
07 |Description of function
https://www.loxone.com/dede/kb/touch-night-light/
Published by
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
Tel: [phone]
loxone.com