LOXONE Motion Sensor Air Series User manual

Technical Specifications
Motion detection range 8m / 26.25ft (at height of
3m / 9.84ft)
Detection angle vertical 110°
Detection angle horizontal 360°
Power supply 9 ... 28VDC or 2x 1.5V AA batteries
Interface Loxone Air:
868MHz (SRD Band Europe),
4 channels available
915MHz (ISM Band Region 2),
10 channels available
max. Power 3.16mW
Ambient temperature -20 ... 70°C / -4 … 158°F (line
powered)
-20 ... 54°C / -4 ... 129°F (battery
powered)
Measuring range of
brightness sensor
0 ... 188000lx
Humidity max. 95% r.H. (non condensing)
Safety rating IP40
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
V250320
Part No: 100190 (White)
Part No: 100192 (Anthracite)
Motion
Sensor
Air
Motion detection passive infrared sensor
2.5 ... 3.5m / 8.2 ... 11.5ft
Recommended installation
height
Installation height max. 5m / 16.4ft
Power consumption max. 175mW
Power loss max. 175mW

About the product
The Loxone Motion Sensor Air is used to detect motion and
brightness for home and similar non safety critical
applications.
Features
• Motion Detection
• Brightness Detection
Installation
Install the mounting ring on the desired installation place.
Power up the device and pair it with your Miniserver in Loxone
Config. To finish the installation attach the Loxone Motion
Sensor on the mounting ring.
For additional information, declaration of confirmity,
visit www.loxone.com/help/motion-sensor-air
Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including
interference that may cause undesired operation
Connection
Wire cross-section 0.25 ... 0.8mm² / AWG23 ... 18
Stripping length 7mm / 0.27”
Temperature resistance -40 … 105°C / -40 … 221°F
Maintenance & Cleaning This device is free of
maintenance and may only be
cleaned with a dry cloth.
Dimensions 98x19mm / 3.86x0.75” (DxH)
(without fresnel lens)
mounting
ring
attachment for
mounting ring
or 24 V
power
supply
learn
button
insert AA
batteries