LOXONE Touch Pure Air 100399 User manual

Power consumption typ. 87mW, max. 119mW
Power loss max. 119mW
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
V310320
Part No: 100399 (White)
Part No: 100400 (Anthracite)
Touch
Pure
Air
Technical Specifications
Ambient temperature external power supply:
-20 … 70°C / -4 … 158°F
battery powered:
-20 ... 54°C / -4...129°F
Power supply 6 ... 30VDC or
2x 1.5V AAA batteries
Touch points 5 touch points, capacitive
touch detection
Humidity detection range
Temperature detection range -40 ... 125°C / -40 ... 257°F
+/- 0.5°C / 0.9°F
0 ... 100% r.H. +/- 2%
(non condensing)
Interface Loxone Air:
868MHz (SRD Band Europe),
4 channels available
915MHz (ISM Band Region 2),
10 channels available
max. Power 3.16mW
Humidity max. 95% r.H. (non condensing)
Click feedback Yes
Battery lifetime up to 2 years
Orientation light only possible with power supply

Touch
Buttons
1
2
5
4
3
Batteries
Learn
Button
Status
LED
About the product
The Loxone Touch Pure has five touch zones, which can be
configured according to your needs. The large central touch
zone is ideal for controlling lighting, whilst the corner zones are
handy for controlling music and blinds, for example.
Features
• 5 touch buttons
• Temperature & Humidity sensor
• Optional click feedback
• Orientation LED light
For additional information, declaration of confirmity,
visit www.loxone.com/help/touch-pure-air
This folder is a part of the product!
Installation
Install the mounting frame on the desired installation place.
Power up the device with the provided battery and pair it with
your Miniserver in Loxone Config. To finish the installation
attach the Loxone Touch on the mounting frame.
Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
2.
This device may not cause harmful interference
This device must accept any interference received,
including interference that may cause undesired operation
warm white
LED Light
Wire cross-section
0.25 ... 0.8mm² / AWG18 ... 23
Stripping length 5mm / 0.2”
Temperature resistance
- 40 … 105°C / -40 … 221°F
Connnection
Dimensions 90x90x16mm /
3.55x3.55x0.63” (LxWxH)
Maintenance & Cleaning This device is free of main-
tenance and may only be
cleaned with a dry cloth.
Safety rating IP30
Technical Specifications
Power
Supply