LPA1 LPA360 User manual

PRN: AIM-LPA360-LPN [16.06.17]
A
MY FIRST
EASEL
MY FIRST
EASEL
Important Information:
Before you begin assembly, please read these instructions. See next page for important
warning statements on this product. After product is assembled make sure all bolts and
screws are securely tightened.
Note: Product may vary slightly from images shown.
WARNING:
CHOKING HAZARD – Small Parts. Not for children under 3 yrs.
LPA360
LPA360

KEEP INSTRUCTIONS FOR FUTURE USE
WARNING
Prevent serious injury or death from falls or tipping over
NEVER use this product if there are any loose or missing or
parts. Check after assembly and periodically during use at least once a week
fasteners, loose joints broken
READ all instructions BEFORE assembly and USE of the product
NEVER substitute parts
CONTACT us for replacement parts
NEVER PLACE PRODUCT ON AN ELEVATED SURFACE
ALWAYS place product on a flat, level surface
NEVER place near stairs
ADULT assembly required!
Choking Hazard: Unassembled small parts can be a choking hazard to
children. For the safety of your child it is recommended to not assemble this
unit with them in the same room due to concern they accidently pick up
and swallow small parts.
USEFUL HINTS AND TIPS
Assemble product on a soft surface like a carpet/rug or blanket to
protect finish.
While one person can assemble this item two people are recommended
DO NOT USE POWER TOOLS TO
ASSEMBLE THIS PRODUCT. USE OF
POWER TOOLS WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT
MAKING IT UNSAFE.
USING A POWER TOOL CAN CAUSE BOLTS
AND SCREWS TO BE OVER TIGHTENED
AND STRIP HOLES.
2

PARTS LIST
(LPA360 -6) x1-X
Label on bottom side
(LPA360 -2) x1-X
(LPA360 -7) x1-X
(LPA360 -9) x2-X
(LPA360 -11) x1-X
(LPA360 -10) x1-X
(LPA360 -8) x1-X
(LPA360 -12) x2-X
(LPA360 -3) x1-X (LPA360 -4) x1-X
(LPA360 -5) x2-X
1
2
5
5
3
4
6
7
8
9
9
10
11
12
5
6 7
10
11
12
8
9
2
3 4
MADE IN CHINA
The composite wood products contained in this product comply with the applicable Phase 2
emission standards specified in section 93210.2 (a). California Code of Regulations.
Model :#
Color:
Shipment Ref. #:
Product Packaging Information
PRN: 02-04016 [16.05.31]
LPA1 LLC.
501 South 9th Street
Reading, PA 19602
Toll Free: 800-704-9058
Date:
1
(LPA360-X-1) x1
Chalkboard Side
Whiteboard Side
3

Fixtures and Fittings supplied (actual size)
HARDWARE
QTY
Name
Ref.
Head
mm 10 20 30 40 50 60 70 80
1 "1" 2" " 2 " 3"
ASSEMBLY INSTRUCTIONS
1a
Fixtures and Fittings (not to scale)
2
Screwdriver
Not Included
M4 x 38mm Screw
M6 x 12mm Bolt
M6 x 15mm JCN Nut
2
2
2
B
C
D
10
M4 x 25mm Screw
A
A
1
2
5
5
5
2
M4 x 25mm Screw [x4]
A
4

ASSEMBLY INSTRUCTIONS
5
2
M4 x 25mm Screw [x2]
A
2a
A
5
3
5
5
3
4
Back legs need to be flush with floor
3
3a
A
2
6
6
2
3
4
2
M4 x 25mm Screw [x4]
A
3 3
Floor
Shelf arms need to be
flush with back legs
3
6
Note: Color side faces up on shelf

ASSEMBLY INSTRUCTIONS
6
5b
5a
B
M4 x 38mm Screw (x2)
B
1
5
9
5
1
5
5
5
M6 x 12mm Bolt (x2) M6 x 15mm JCN Nut (x2)
CD
4
1
10
11
10
1
C
D
4a
10
1
Black board on the back
4c
12
1
4b

ASSEMBLY INSTRUCTIONS
7
6
6a
8
7
6b
8
7
10
7
8
10
11
Ensure paper roll is locked in tightly into plastic clip.
Remove plastic protector film
7REVERSING BOARD POSITION
Board position should ONLY be adjusted by an adult
a. RELEASE LOCKS b. ROTATE BOARD c. LOCK BACK
7a 7c
PRN: 02-55002 [16.05.30]
1
2
Discard
in garbage
safely
PRN: 02-55002 [16.05.30]
1
2
Discard
in garbage
safely

ASSEMBLY INSTRUCTIONS
8
8REVERSING PAPER CLIP
a. REMOVE CLIPS
b. ROTATE CLIP
d. COMPLETE
c. CLIP BACK ON
9ATTACHING PAPER TO YOUR EASEL
b. CLIP ONa. ROLL PAPER DOWN
ON WHITE BOARD ON BLACK BOARD
c. CLIP ON

REPLACEMENT PAPER ROLLS
9
Replacement Rolls of paper for this easel can be UP TO 18” wide and can be
purchased at any major retailer or on dotcom.
CLEANING INSTRUCTIONS
Whiteboard:
!
without erasing.
!Clean your white board weekly to prevent marker color build up. Wipe
clean with a damp cloth to keep your board surface looking new. If not
coming clean then try glass cleaner, hand sanitizer, baby wipes or a non-
abrasive household cleaner.
Chalkboard:
! Erase the board with a latex or felt eraser. Keep the erasers dry and clean
them regularly.
! Clean the surface with clear, warm water and a clean cloth. Let dry before
use.
Do not allow dry erase marker ink to remain on the board for several days
DISMANTLING PRODUCT AND STORAGE
!Follow directions in reverse to dismantle this product.
!Keep all hardware together in a plastic bag and store with the other parts.
Store all parts in a safe and temperature controlled environment.
CARE AND MAINTENANCE

Place PPI Box Label Here
MADE IN CHINA
LPA1 LLC.
501 South 9th Street
Reading, PA 19602
Toll Free: 800-704-9058
PRODUCT PACKAGING INFORMATION
The following packaging information is also found on Part 6.
6
MADE IN CHINA
The composite wood products contained in this product comply with the applicable Phase 2
emission standards specified in section 93210.2 (a). California Code of Regulations.
Model :#
Color:
Shipment Ref. #:
Product Packaging Information
PRN: 02-04016 [16.05.31]
LPA1 LLC.
501 South 9th Street
Reading, PA 19602
Toll Free: 800-704-9058
Date Code:
MADE IN CHINA
The composite wood products contained in this product comply with the applicable Phase 2
emission standards specified in section 93210.2 (a). California Code of Regulations.
Model :#
Color:
Shipment Ref. #:
Product Packaging Information
PRN: 02-04016 [16.05.31]
LPA1 LLC.
501 South 9th Street
Reading, PA 19602
Toll Free: 800-704-9058
Date:
10
PRODUCT LIMITED WARRANTY
Who is covered by this warranty?
This warranty extends to the original purchaser only and will need proof of
purchase.
Time period of this warranty.
The 1 year term of this warranty shall commence on the date of the original
purchase.
What is covered by this warranty?
The warranty covers any defects, malfunction or failure attributed to either the
quality of materials used, workmanship of finish, or assembly. If during the first 1 year
after purchase of this product under reasonable and non-commercial use, and
conditions of maintained, it fails to conform to this warranty, LPA1 LLC. will at its
option, repair or replace the product determined to be defective.
What is Not Covered by this warranty?
This warranty does not cover damages or malfunctions not resulting from defects in
material or workmanship. Damages or malfunctions from other than normal use,
including, but not limited to, repair or tampering by unauthorized parties.
If you require service.
Find below our contact detail and Product Packaging information when calling us.
This LPA1, LLC. product is made from wood and as such slight imperfections may
occur that are not manufacturing defects. These are the characteristics that make
wood furniture unique and memorable. Remember, in a forest no tree is the same!