LT-3060
LED CV Power Repeater
LED Power Repeater is suitable for all of our company's power-output
LT-3060 (Common Anode)
Input voltage
Max load current
Max output power
Dimension
Package Size
Weight (G.W)
DC5V～DC24V
5A/CH×3CH 15A Max
75W(5V) 180W(12V) 360W(24V)
L121×W39×H39(mm)
L123×W42×H42(mm)
100g
14
style controllers' power expansion, it accepts PWM control, the control quantity
of LED lights would be twice as much by adding one more power repeater,
unlimited quantity of power repeater to be connected theoretically.
3. Power repeater connected to LED dimmer as follows
1. Product parameter
LT-3060 LED CV Power Repeater Manual LT-3060 LED CV Power Repeater Manual
This manual is only apply to this model, any update is subject to change without
prior notice.
6. Attention:
1. Thi s produ ct is non-wat erproof , pleas e avoid the sun and rain. Put it in a waterproof
2. The condition of radiation will affect the working life of controller, please install
3. Please check if the output voltage of the LED power supply compl y with the voltage
4. This product is a high current device, please ensure a solid connection in order
5. Ensure all wire connection are correct before power debugging, which is to avoid
6. All the switchi ng power suppl y must be well grounded, so as not to affect the worki ng
7. Please do not maintain it by yourself if any fault, please contact your supplier if
box if install outdoor.
the product in a good radiation condition.
range of the product.
lamps to be burnt because of wrong connection.
to avoid poor contact to damage parts and trigger fires.
life of LED.
any question.
7. After-sale service:
This product is 2 years free warranty, lifelong technical maintenance. The warranty
Repair or replacement as provided under this warranty is the exclusive remedy
excludes improp er connection to power supply, overl oad worki ng, etc. Human damages
and force majeure factors.
of the customer. We shall not be liable for any incidental or consequential damages
for breach of any stipulation in this warranty.
Working temperature -30 -55
℃ ℃
POWE R OUTP UT
INP UT
SIG NAL
MODE L: LT-30 60
DC5V -DC2 4V
LED C ONTR OLLER
5A×3C H
POW ER REPEATER
POW ER OUTP UT
INP UT
SIG NAL
MODE L: LT-30 60
DC5V -DC2 4V
LED C ONTR OLLER
5A×3C H
POW ER REPEATER
RUN
E2
LED
R2
R4
RX
IN=DC12V-DC48 V
DIMMER
DC+DCABGND
GND
PWM
R3
OUT
H H HH
H H HH
H H
LN
AC DC
AC2 20V 110V
POWER
S UPPLY
DC1 2V-24 V
in-phase cable
AC90-250V
DC1 2-48 V
LT-3200-6A
+
DC1 2-48 V
H H HH
H H HH
H H
LN
AC DC
AC2 20V 110V
POWER
S UPPLY
DC1 2V-24 V
+
For the sake of the convenience to repair,please don't tear up or obliterate
the label on product.
RoHS
COMPLIANT
warranty
2 years
Power supply chosen DC CV SMPS
