Microphone input Electronically balanced, discrete input configuration
Frequency response 10 Hz to 55 KHz, +/- 3dB
Distortion (THD&N) 0.005% at +4 dBu, 1KHz
Gain range 0dB to 44dB(MIC)
SNR (Signal-Noise Ratio) 115dB
Line input Electronically balanced
Frequency response 10 Hz to 55 KHz, +/- 3dB
Distortion (THD&N) 0.005% at +4 dBu, 1KHz
Sensitivity range +15 dBu to - 30 dBu
Line input Balanced
Frequency response 10 Hz to 55 KHz, +/- 3dB
Distortion (THD&N) 0.005% at +4 dBu, 1KHz
Microphone input 1.4K ohm
Channel insert return 2.5 k ohm
All other inputs 10 K ohm or greater
Tape out 1 Kohm
All other output 120 ohm
Hi shelving +/-15dB@12KHz
Mid bell +/-12dB @ 2.5KHz
Low shelving +/-15dB@80Hz
Fader 0dB, channels muted:-100dBr(ref: +4dBu)
Fader 0dB, all input channels assigned and set to
UNITY gain:-90dBr(ref:+4dBu)
+22dBu balanced XLR,
+22dBu unbalanced, 1/4'' jacks.
AUX return gain range OFF to +15dB
AUX sends max out +22dB
USA/Canada 100-120V~, 60Hz
Europe 210-230V~,50Hz/60Hz
UK/Australia 240V~,50Hz
Power consumption 25 watts
Dimension(W*D*H) 409mm*330mm*43mm(18.10''*12.99''*1.89'')
AMX-180 MKII: 3.90Kg (8.6 lb)without adaptor
AMX-*180 FX MKII: 3.97Kg(8.75 lb)without adaptor
Physical Net weight
Main mix section
Noise(Bus noise)
Max output
Power supply
(AC/AC adaptor) Main voltage
Mono input channels
Stereo input channels
Impedance
Equalization
