15dB @ 100Hz~8KHz
15dB @ 3KHz
15dB @ 500Hz
15dB @ 80Hz
15dB @ 12KHz
2. TECHNICAL SPECIFICATION
Mono input channels Microphone input Electronically balanced ,discrete input configuration
Frequency response 10Hz to 55KHz, 3dB
Distortion (THD&N)
Gain range
SNR (Signal Noise Rated)
Line input
Frequency response
Distortion (THD&N)
Sensitivity range
0.005% at +4dBu, 1KHz
0dB to 44dB(MIC)
115dB
Electronically balanced
10Hz to 55KHz, 3dB
0.005% at +4dBu, 1KHz
+15dBu to -45dBu
Stereo input channels
10Hz to 55KHz, 3dB
Line input Balanced
Frequency response
Distortion (THD&N) 0.005% at +4dBu, 1KHz
Impedance Microphone input 1.4K ohm
Channel insert return 2.5K ohm
All other inputs 10Kohm or greater
Tape out 1K Ohm
All other output 120 ohm
Equalization Hi shelving
Mid sweep
HI-MID
MID-Low
Low shelving
DSP SECTION A/D and D/A converters
DSP resolution
Type of effects
24 bit
24 bit
Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
REVERB+DELAY, REVERB+CHORUS
REVERB+FLANGER combinations
Presets 256
Controls 16-position PRESET Selector
16-position VARIATION selector
PEAK LED
MUTE SWITCH with LED indicator
Main Mix Section Noise (Bus noise ) Fader 0 dB, channels muted:-100.0dBr (ref.:+4dBu)
Fader 0 dB,all input channels assigned and set to
UNITY gain:-90dBr(ref.:+4dBu)
Max output +22dBu balanced XLR,
+22dBu unbalanced,1/4" jacks
AUX Return gain range OFF to +15dB
AUX Sends max out +22dBu
Power supply
(AC/AC Adaptor)
Main voltage USA/ Canada 100-120V~,60Hz
Europe 210-230V~,50Hz
U.K/Australia 240V~,50Hz
Power Consumption 36watts
Physical
Net weight
Dimension (W D H) 420mm 440mm 43mm(16.54" 17.3 1.69")
4.86Kg
USB SECTION ADC / DAC 16 Bit 32~48KHz
Fully Compliant with USB 1.1 specification
No software drivers are need with windows XP or MAC OSX
- 2 -
