Lucci LEDlux Moto User manual

Installation Instructions
1 | P a g e v 2 . 0 ( 1 0 / 2 0 1 9 )
MOTO LED TABLE LAMP
SKU# 259916, 259917, 261340, 261341
Rated Voltage 100-240V~ 50/60Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this luminaire. Please keep instructions for future reference.
Warranty
•This luminaire is covered by a 3 year warranty from the date of purchase. Please retain proof of purchase.
•Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
•Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
Installation Requirements
•Select a suitable location for the luminaire:
- Ensure it is on a flat and stable surface.
- This luminaire is suitable for indoor use only.
- Do not place flammable material near or over the luminaire.
- Ensure the luminaire is not installed in direct line of an air vent/system.
- If installing a luminaire in an area prone to moisture, ensure that the area is well ventilated and an appropriately
rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such
is not covered under warranty.
•Take care not to pull any electrical wires during unpacking as this may damage the connection.
•Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
•Do not plug into the mains power socket outlet before or during assembly. Only do so after the portable luminaire is
fully assembled and ready to use for the first time.
Installation Directions
1. Remove all packaging material from the product.
2. Select a suitable location for the luminaire. See the installation requirements above.
3. Adjust the head of the luminaire (A) to the desired angle. Do not use excessive force and do not adjust more than the
45° angle shown on the next page, as this may damage the adjustable joint and the internal wires.
4. Insert the plug (C) into the mains socket outlet and ensure it is fully plugged in.
5. Turn power on at the mains power socket outlet.
6. Use the cord line switch (B) to turn the luminaire on/off.

Installation Instructions
2 | P a g e v 2 . 0 ( 1 0 / 2 0 1 9 )
NOTE: When adjusting the head of the luminaire, do not adjust more than the 45° angle shown above, as this
may damage the adjustable joint and the internal wires.
Safety Tips
•Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning or
making any adjustment to the luminaire.
•The external flexible cable or cord of this luminaire cannot be replaced; if the cable or cord is damaged, the luminaire
shall be destroyed.
•The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire
shall be replaced.
•To avoid injury or damage to the luminaire, ensure that power leads are secure before connecting the power.
•Young children should be supervised to ensure that they do not play with the portable luminaire.
•Handle the fitting and/or shade with care to avoid any damage or breakage.
•Select a suitable location away from liquids and hazards.
•Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
•To clean, wipe with a damp clean cloth. Do NOT soak or immerse the product in water or other liquids.
Specifications
SKU #
259916
259917
261340
261341
Colour
Grey
Blue
White
Black
Rated Voltage
100-240V~ 50/60Hz
LED
7W, 450 lumens, 3000K, Non-dimmable
Weight
0.9kg (not including LED driver)
Dimensions
H:425mm L:325mm W:320mm MAX