Lumantek ASI-100 User manual

1
Manual Ver. 1.2
PCI Adaptors
Reference and Installation Guide
Model : ASI-100 / ASO-102 / ASA-105 / LVI-110
/ LVO-112 / LVD-115
The Company Based on Technology and Reliability
LUMANTEK
www.lumantek.com

2
“This manual is Installation Guide for LUMANTEK PCI Adaptor Users”
1All specifications and features are subject to change without notice.
2For the Device Driver, you may download on the web.
3Others:
 Written on: Jan, 2004
 Revised on: Nov 2 2004 (1’st)
 Revised on: Feb 2 2005 (2’nd)
 Revised on: May 3 2007 (3’rd)
 LUMANTEK Lab
Tel: 82-2-2027-2400, Fax: 82-2 - 2027 - 2409
1These Installation Guide includes as bellows PCI Adaptors.
1. ASI – 100 (ASI Input PCI ADAPTER)
2. ASO – 102 (ASI Output PCI ADAPTER)
3. ASA – 105 (ASI In/Out PCI ADAPTER)
4. LVI – 110 (SPI Input PCI ADAPTER)
5. LVO – 112 (SPI Output PCI ADAPTER)
6. LVD – 115 (SPI Combo PCI ADAPTER)

3
Index
1PCI Adaptor Installation (Page 04)
[Hardware Installation] (Page 04)
[Driver Installation] (Page 05)
[Verification of Device Driver] (Page 10)
2PCI ADAPTER Main Features (Page 11)
1. ASI – 100 (ASI Input PCI ADAPTER) (Page 11)
2. ASO – 102 (ASI Output PCI ADAPTER) (Page 12)
3. ASA – 105 (ASI In/Out PCI ADAPTER) (Page 13)
4. LVI – 110 (SPI Input PCI ADAPTER) (Page 14)
5. LVO – 112 (SPI Output PCI ADAPTER) (Page 15)
6. LVD – 115 (SPI Combo PCI ADAPTER) (Page 16)

4
PCI Adaptor Installation
Mount PCI Adaptor (ASI-100 / ASO-102 / ASA-105 / LVI-110 / LVO-112 /
LVD-115) on computer and install Device Driver provided with PCI Adaptor to
operate. Just insert CD (provided with PCI Adaptor) into CD-ROM driver and
then you may install device driver easily to follow the request of computer
dialogue box.
[Hardware Installation]
1. Computer power off and open the computer cover.
2. Plug in the Adaptor on PCI slot.
3. Fasten the adaptor into the bracket tightly.
4. Cover the computer cover.

5
[Driver Installation]
1. Computer recognizes new device driver as Window starts after PCI Adaptor
plug in.
2. Hardware Wizard will operate after the Adaptor is recognized on computer.
To install, push “Next” menu box.

6
3. To install the driver provided with the Adaptor, select ‘Search for a suitable
driver for my device (recommended)’ menu, then push ‘Next’ button.
4. Device Driver is in CD-ROM provided with Adaptor, so, select ‘CD-ROM
drivers’ and push ‘Next’ button.

7
5. Select the driver location in CD-ROM using ‘Browse…’ button. (Egg: if the
CD-ROM driver is assigned on ‘G’ Driver, then you may make “G:₩asi
directory” and push ‘OK’ button.
6. You already found out the driver on above paragraph #5 action, push ‘Next’
button on ‘Driver Files Search Results’ window.

8
7. Device Driver will be installed as you push ‘Yes’ button on ’Digital Signature
Not Found’ window.
8. This means ‘IMK-DVB Input/Output Adapter Device’ was installed. Push
‘Finish’ button to complete installation.

9

10
[Verification of Device Driver]
If Device Driver is installed successfully doing above action, you can see on
‘Device Manager window’ that ‘IMK-DVB Input/Output Adapter Device’ is
installed. (You may select ‘Device manager’ through ‘Start’ → ’Settings’
→ ’Control Panel’ → ’System’ → ’Hardware’ → ’Device Manager.’)
If Device Manager is not assigned or collision and protection, etc. are
appeared on monitor, then it means ASI Card Device Driver was not installed
correctly.