Lumen WF-C User manual

ENG
1
Lumen Light for Aquascaping
Wifi App controller (WF-C)
..User manual
ApplicationAA
Contents
Technical information
2
Introduction, features and installation of the LED controller 2
Safety instructions 4
About the application 4
Reference settings and preset modes 10

ENG
2
Technical information
- Distributor: Lumen Aquatech DOO
- Type: FullColor Wifi (WRGB ) controller
- Reference setting: WRGB 100%
- Input voltage 24 Volt DC
- Output voltage 24 Volt DC
- IP protection level: IP20
- Number of channels: 4 channels
- Current: max 15 A
- Max power: 360 Watt (with 24V DC)
- Standby power consumption Psb <0.5W
- Width: 40 mm
- Length: 100 mm
- Height: 20 mm
- Weight: 0,2 kg
- Input : GX16 2P plug
- Output GX16 7P plug
- Expand connection: 12 V Micro USB
- Expand connection: 24 V USB C
- Connections: Wi-Fi 2.4G + Bluetooth 2.4G + Broadcast 2.4G
- Color: Black
- Mobile application: Android + iOS
DC 12V DC 24V
Expand Expand
connection connection
DC 24V DC 24V
input output
Indicator
White flash slowly
Waitnig for pairing
White constant
Paired + Device is online
Flash alternately
Factory reset
Red constant
Linkage Mode – Receiver Mode
Button
Hold on 3 seconds
Factory reset
Double-Press
Mod switch
Triple-Press
Linkage Mode – Receiver Mode
Introduction , features and installation of the LED controller
Cloud-based service that connects you to all your controller devices, and easy control them at anywhere.
There are three modules of Wi-Fi (2.4G) + Bluetooth (2.4G) + Broadcast (2.4G), which make the connecting easy and fast.
The expands plug are available which is adapt for more devices such as Pump, Fan, background light, mist maker,
electromagnetic valve etc. The rich settings to make the lighting become more powerful.
Pairing .
1.
Only support
2.4GHz
Router
Confirm the home router Wi-Fi signal type
because a 2.4HGz Wi-Fi is required to
add a device.
2. Input correct Wi-Fi password
Wrong password is the main reason why
pairing fails. Please check your
password and try again.
3. Turn on the premmission access
To ensure successful pairing, we suggest
you need endabling the follwing access,
such as Location, Wi-Fi, Bluetooth etc.
And the location is very improtant for pairing the devices.
4. Internet required
Register device to smart cloud the internet
is required or pairing will failed.

ENG
3
Pairing (Router is required and must be connected to the Internet. Press and hold the buttonon the device for 3 seconds to restore
the factory settings. The light should blink white when the device is ready for pairing and the device you want to add will appear in
the application. If the light is not blinking white slowly, press and hold on the device again for 3 seconds.)
Download and Open
iMicMol APP to Add Device
Tap “Add Device” to continue Choose “Auto Scan”, the device
will appear automatically
Enter your Routerʼs Password
(Home Router)
Waiting for register Device
to Smart Cloud
Turn “ON” to control your light
after paired.

ENG
4
Safety instructions
- The device is only usable with the light units produced by Lumen Aquatech DOO.
Connecting different types of lighting devices is forbidden.
- The controller can only be safely removed or connected to the lamp with disconnected network cable.
- Do not extend or connect the cables in a non-standard way.
- The light source emits heat during operation, thus it should not be used near flammable materials.
- The device must be protected from strong impurities and rough external influences.
Furthermore, knocking, drilling or modifying it in any way is strictly forbidden!
It’s also forbidden to use or to install it with any electronic product with a broken or defective connector!
- Devices operating on 12 or 24 volts of extra low voltage must NOT be connected to the 230V main power source,
because of the high risks of electric shock, accident and fire! The device can only be connected to the power supply
specified by Lumen Aquatech DOO! Failure caused by supplying the device with incorrect voltage is not a warranty defect!
- Covering the device is flammable, thus strictly forbidden! When installing such products, make sure that the unit is well ventilated.
- In humid environments, only use suitable products with IP44 or higher intrusion protection.
Products with protection below IP44 can cause electric shock in humid, wet environments!
- Never touch wet / humid electronic devices under voltage!
- To protect children, store electronic devices out of their reach!
- Never look directly into the light source!
- Electrostatic discharges (ESD) may damage internal electronic components!
- Ignoring the instructions given in this guide may result in fire, electric shock, burns, personal injury,
and other property and non-property related damage.
Our company cannot be held responsible for the lack of compliance with this guide.
About the application
On the Dashboard, you can quickly to go the preset to set the program. And switch ON/OFF for the lighting intensity,
effects, expands easily, which to help you rule all the status of your devices as system.
Devices list
Quick set
Set 12V expand
Modes
ON/OFF
Power bar
Current device
Set acclimation
Channels intensity
Set 24V expand
Effects ON/OFF

ENG
5
There are two modes, Auto and Manual mode with 4 channels to make varies lighting settings.
(The device's auto settings can be viewed on our Lumen Aquatech youtube channel)
Modes
Intensity line
Add and delete time point
Time adjust
Channels intensity
Effects set
Time axis, drag to adjust time
Time point
Save current settings to preset
Preset list
Demo current settings
Drag up and down to adjust intensity
Modes
Intensity line
Channel intensity
Drag up and down to adjust intensity

ENG
6
By adjusting the effects, you can set acclimatization, lightning, lunar, and cloudy weather,
to simulate the natural lighting for the aquarium life.
Modes
Acclimation
Lightning
Lunar
Cloudy
With acclimatization, we can easily set a daily period.
This is a simplified form of the automatic function.
Ramp time
Drag up and down to adjust intensity
Channels intensity
Set start time
Set end time
Set the transition time

ENG
7
With the lunar effect, you can adjust the period and intensity of the night light.
From the 4 channels, you can choose the color that best suits us for night lighting.
Intensity level
Channels intensity
Set channel
Set start time
Set end time
With the lightning effect, you can adjust the period, frequency and intensity of an artificial lightning.
Intensity level
Lightning intensity
Set start time
Set end time
Daily repeat
Frequency

ENG
8
With the cloud effect we can adjust the period and intensity of an artificial overturning.
Intensity level
Speed of clouding
Set start time
Set end time
Intensity of clouding
Set clouding intensity
You can set, switch and turn on and off the expand output connectors .
Expand connection : 12 V Expand connection: 24 V

ENG
9
Can set the period or intensity of the 12V expand output connector
Period
Timers
ON/OFF
Set start time
Set end time
Intensity level
Can set the period or intensity of the 24V expand output connector
Period
Timers
ON/OFF
Set start time
Set end time
Intensity level

ENG
10
The application settings include:
(The pairing of the two devices can be viewed on our Lumen Aquatech youtube channel)
System settings
Helps
Time format
Enable pairing
Set signal
Reference settings and preset modes
Reference setting based on which
LRW165 -... H series data was determined,
WBGR CH: 100%
LRW1 color mixing
NATURAL WARM
WBGR CH: 80%,60%,60%,100%
LRW2 color mixing
YELLOWISH TONE
WBGR CH: 80%,25%,50%,100%

ENG
11
LRW3 color mixing
RED-WHITE TONE
WBGR CH: 80%,35%,25%,100%
LRW4 color mixing
RED-BLUE TONE
WBGR CH: 80%,55%,30%,100%
LRW5 color mixing
GREEN-BLUE TONE
WBGR CH: 80%,60%,40%,60%
LRW6 color mixing
BLUE TONE
WBGR CH: 80%,75%,40%,80%
LRW7 color mixing
NATURAL COLD
WBGR CH: 80%,80%,75%,100%
LRW8 color mixing
NATURAL WHITE
WBGR CH: 80%,35%,25%,70%
** All settings here are guidelines only, everyone can customize them to their own taste.
** Some modes may be too strong depending on the size of the aquarium, so reduce the intensity of the channels proportionally