Lumens DC125 Quick start guide

DC125 –Firmware(FW) Upgrade Instruction
DC125 - Firmware (FW) Upgrade Instruction
1. Connect DC125 with a PC through USB cable.
2. Check the original FW version of DC125 in [Camera Settings] of LadibugTM.
-If it’s DHU1xx, please download with DHU1xx FW.
-If it’s DHU2xx, please download with DHU2xx FW.
**Note:
If download the wrong FW will cause black image problem, when this problem
happened, please return the FW to the correct version.

DC125 –Firmware(FW) Upgrade Instruction
3. Run the [2088SFWriteTool.exe]
4. Press […] to browse the file and select the .bin file downloaded from website.
5. After the .bin file selected, please press [Download] to start the process.
-If original FW version is DHU1xx, please download with DHU1xx FW.
-If original FW version is DHU2xx, please download with DHU2xx FW.

DC125 –Firmware(FW) Upgrade Instruction
6. When the process is finished, it will show “Success”in the status box, and then you
can close the screen.
**Please do not stop the running process which may cause the unit unable to work.
7. Check the FW version in Camera Setting of LadibugTM
8. Finish.