Lumi TTV11-46TW User manual

INSTALLATION MANUAL
TTV11-46TW
70"
MAX
rated
for TV
70kg/154lbs
rated
for DVD
5kg/11lbs
TV Cart
200x200/300x300
350x350/400x200
400x400/600x200
600x400

Component Checklist
Required for Installation
•Use with products heavier than the rated weights indicated may result in instability causing
possible injury.
• Please closely follow the assembly instructions. Improper installation may result in damage
or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by
professionals.
• Make sure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these
items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury.
CAUTION
have any questions regarding any of the instructions or warnings, please contact your
local distributor for assistance.
Read the entire instruction manual before you start installation and assembly. If you
12
base
A
(x1) caster
B
(x4) base column (x2)
C
VESA extension
adapter arm (x2)
K
cable cover
L
(x4) M8x20 (x8)
M
M6x8 (x8)
N
M6x12 (x16)
O
M6x18 (x1)
P
cable clip holder (x5)
R
M8x8 (x8)
Q
cable clip (x5)
S
5mm Allen key
W
(x1)M10 wrench
U
(x1) 4mm Allen key (x1)
V
Package M
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, contact your place of purchase for a replacement.
upper column (x2)
D
equipment shelf
E
(x1) shelf mounting bracket (x2)
F
front cover (x1)
G
mounting plate
H
(x1) rear cover (x1)
I
VESA extension
adapter arm (x2)
J
M5x14 (x4)
M-A
M6x14
M-B
(x4) M6x30
M-C
(x4) M8x30
M-D
(x4)
washer
M-F
(x4) small spacer
M-G
(x8) big spacer
M-H
(x8)M8x50
M-E
(x4)
M6 wrench
T
(x1)

3.Installing the Columns
4
3
B
U
1. Installing the Wheel Casters
A
2. Attaching the Columns to the Base
Do not fully tighten the screws M.
C
M
W
Align the column as shown,
making sure that the cable
management holes and the
shorter legs on the same
side.
Position the cable management holes
(found on each upper column leg)
facing inward as shown.
D
4. Installing the Shelf Mounting Brackets
O
1
1
2
N
V
N
F

1:1
M-E
M-DM-C
M-A
M-F
M-G M-H
M-B
6
5
5. Installing the Front Cover and Equipment Shelf
6a. Attaching the Mounting Plate to the Display
400mm
350mm
300mm
400mm
300mm 200mm 350mm
200mm
VESA 200x200mm/300x300mm/350x350mm
400x200mm/400x400mm
H
M-A
M-F
TV TV
TV TV
M-C
M-D
M-F
M-G
M-H
H
O
Position G as indicated, make sure the front
of G and the longer legs on the same side.
O
1
3
CAUTION: Fully tighten the screws M
under the base.
4
M
W
2
E
G
Make sure E and the shorter legs on
the same side.
M-B
M-F
M-E
M-F
Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.

8
7
6b-1. Installing the VESA Extension Adapter Arms
VESA 600x200mm
600mm
200mm
600mm
400mm
VESA 600x400mm
W
Q
M-G
M-H
TV TV
TV TV
10mm
M
K
J
J
K
7. Mounting the Display onto the Screws
1:1
M-E
M-DM-C
M-A
M-F
M-G M-H
M-B
M-A
M-F
M-B
M-F
M-C
M-D
M-F
M-E
M-F
Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
6b-2. Attaching the Mounting Plate to the Display

P
Tighten the screw to
fix the screen.
10
9
8. Adjusting the Tilting Angle of the Display
W
M
Default Position (0°) Tilted Position (5°)
11a: Routing the Cable
11b-1: Attaching the Cable Clip Holders
R
Tighten the screw to
fix the screen.
P
9. Snuggly Adjusting the Rear Bolts
T
10. Fixing the Display in Landscape/Portrait Position(If Necessary)

12
11
12. Attaching the Cable Covers
2a
2c
L
2b
11b-2: Routing the Cable through Cable Clips
S
S

14
13
0 ~+90°°
13. Attaching the Rear Cover
O
O
I
Maintenance
• Check that the cart is secure and safe to use at regular intervals(at least every three months).
• Please contact your distributor if you have any questions.
·
· If you want to adjust the columns height after finishing the display installation. Please remove
the equipment shelf, then adjust the columns to the desired height.
It is recommended to adjust the columns to the desired height before installing the display.