Luminance Brands SR400 User manual

1-800-777-4440
www.luminancebrands.com
Retain this manual for future use.
Questions, problems, missing parts: Before returning to the store, Call Customer Service
ACCESSORY
Part No. F40BP74120003 Form No.BP7412-3
Revision: 12032020 Printed in China 12/2020
Luminance Brands Ceiling Fan Product Limited Warranty
What The Limited Warranty Covers:
This limited warranty is offered by Luminance Brands (“Luminance Brands” or “our” or “we” or “us”) to the original purchaser (“you” or “your”) of a consumer or industrial Luminance Brands ceiling
fan product including its motor and the other components, and accessories of a consumer or industrial Luminance Brands ceiling fan product sold separately (“Luminance Brands Ceiling Fan
Product(s)”) against defects in workmanship and materials, subject to the exclusions described below.
What The Limited Warranty Period Of Coverage Is:
All limited warranty periods herein begin on the date of original Luminance Brands Ceiling Fan Product purchased by You.
This limited warranty covers the Luminance Brands consumer Ceiling Fan Product motor for the lifetime of the original purchaser’s ownership when operated in accordance with Your Luminance
Brands Ceiling Fan Product Owner’s Manual or other instructions provided by Luminance Brands to You with the Luminance Brands consumer Ceiling Fan Product.
This limited warranty covers the Luminance Brands Industrial Ceiling Fan Product motor for ve years from the date of purchase of Your Luminance Brands Industrial Ceiling Fan Product (when
operated in accordance with Your Luminance Brands Ceiling Fan Product Owner’s Manual or other instructions provided by Luminance Brands to You with the Luminance Brands Industrial
Ceiling Fan Product).
This limited warranty covers the Luminance Brands Ceiling Fan Product LED drivers and LED arrays component or accessory LED drivers and LED arrays for a period of ve (5) years. All other
components of the Luminance Brands Ceiling Fan Product certied as ENERGY STAR® including motor electronics are covered by this limited warranty for a period of three (3) years. All other
components and accessories of the Luminance Brands Ceiling Fan Product including motor electronics are covered by this limited warranty for a period of one (1) year.
No Other Express or Implied Warranty Applies:
THE LIMITED WARRANTIES PROVIDED ABOVE ARE THE SOLE AND EXCLUSIVE WARRANTIES PROVIDED BY LUMINANCE BRANDS TO YOU FOR YOUR Luminance Brands Ceiling
Fan Product, AND ARE IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, WHETHER ARISING BY OPERATION OF LAW OR OTHERWISE, WHETHER
OR NOT THE PURPOSE HAS BEEN DISCLOSED AND WHETHER OR NOT THE Luminance Brands Ceiling Fan Product HAS BEEN SPECIFICALLY DESIGNED OR MANUFACTURED
FOR YOUR USE OR PURPOSE. LUMINANCE BRANDS HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
How You Can Receive Warranty Service:
You must be the original purchaser and have proof of Your purchase of Luminance Brands Ceiling Fan Product from an authorized Luminance Brands Dealer to obtain Your remedy under this
limited warranty. You can return Your Luminance Brands Ceiling Fan Product to an authorized Luminance Brands Dealer, or You can call Luminance Brands Customer Service at 1-800-777-4440
to obtain a return authorization and service identication tag. In order for Us to conrm that Your Luminance Brands Ceiling Fan Product is still under warranty, please retain Your receipt or other
proof of purchase and have that information readily available when returning Your Luminance Brands Ceiling Fan Product to Your place of purchase, or upon calling Luminance Brands Customer
Service. If You call Luminance Brands Customer Service, prior to Your call, please be prepared to provide all model numbers shown on Your Luminance Brands Ceiling Fan Product. Once We
have processed your return authorization request, We will provide You with a postage paid return label which should be afxed to the Luminance Brands Ceiling Fan Product package You ship.
The return label will be sent to the mailing address You provide to Us by phone.
What We Will Do To Correct Problems:
If the defect is covered by this limited warranty, Luminance Brands will repair or replace the applicable Luminance Brands Ceiling Fan Product at no charge to You. If repair of the Luminance
Brands Ceiling Fan Product is not practical or possible within a reasonable time and no replacement Luminance Brands Ceiling Fan Product can be provided, Luminance Brands will refund You
the actual purchase price of Your Luminance Brands Ceiling Fan Product. We will ship the repaired or the replacement Luminance Brands Ceiling Fan Product to You at no charge, but You are
responsible for all costs of removal and reinstallation of Your Luminance Brands Ceiling Fan Product.
What Is Not Covered under the Limited Warranty:
This limited warranty does not extend to and expressly excludes:
• The glass globes and light bulbs of Your Luminance Brands Ceiling Fan Product,
• Any costs or fees associated with the labor, including electrician’s fees, required to install, remove, repair or replace a fan or any fan components or accessories.
• Loss or damage to the Luminance Brands Ceiling Fan Product motor or any Luminance Brands Ceiling Fan Product component or Luminance Brands Ceiling Fan Product accessory caused
by normal wear and tear, rather than due to defects in materials or workmanship,
• Loss or damage resulting from conditions beyond our reasonable control, including without limitation, unforeseeable operating environmental conditions, repairs not made at Our factory or
authorized service center, use of parts or accessories not provided to You as part of this warranty by Our factory or authorized service center, mishandling, unreasonable use, misuse, abuse,
modications or other damage caused by You or a third party to your Luminance Brands Ceiling Fan Product while not in Our possession,
• Loss or damage resulting from improper installation, or other failure to comply with instructions in Your Owner’s Manual including but not limited to Luminance Brands Ceiling Fan Products
installed in unintended industrial or residential applications.
• Luminance Brands Ceiling Fan Product purchases from unauthorized Luminance Brands Dealers.
This limited warranty is deemed null and void upon the occurrence of either of the following events:
• You as the original purchaser cease to own the Luminance Brands Ceiling Fan Product, or
• The Luminance Brands Ceiling Fan Product is moved from its original point of installation.
This limited warranty is only valid within the 50 United States, the District of Columbia, and Canada. No other written or oral warranties apply, and no employee, agent, dealer or other person is
authorized to give any warranties on behalf of Us.
Limitation of Liability:
REPAIR, REPLACEMENT OR A REFUND ARE THE EXCLUSIVE REMEDIES AVAILABLE TO YOU UNDER THIS LIMITED WARRANTY. TO THE EXTENT PERMITTED BY LAW IN NO
EVENT SHALL LUMINANCE BRANDS OR ANY LUMINANCE BRANDS AUTHORIZED DEALER BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES,
INCLUDING ANY ECONOMIC LOSS, WHETHER RESULTING FROM NONPERFORMANCE, USE, MISUSE OR INABILITY TO USE THE Luminance Brands Ceiling Fan Product OR FOR THE
NEGLIGENCE OF LUMINANCE BRANDS OR A LUMINANCE BRANDS AUTHORIZED DEALER. LUMINANCE BRANDS SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN
PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT, NEGLIGENCE, STRICT
LIABILITY, OTHER TORT OR OTHERWISE), SHALL LUMINANCE BRANDS’ OR ANY LUMINANCE BRANDS AUTHORIZED AGENT’S LIABILITY TO YOU OR ANY INDIVIDUAL USING THE
Luminance Brands Ceiling Fan Product EXCEED THE PRICE PAID BY THE ORIGINAL OWNER FOR THE Luminance Brands Ceiling Fan Product. The term “consequential damages” shall
include, but not be limited to, loss of anticipated prots, business interruption, loss of use or revenue, cost of capital or loss or damage to property or equipment.
Dispute Resolution:
In the event of any dispute INCLUDING, BUT NOT LIMITED TO, BREACH OF CONTRACT, BREACH OF WARRANTY, CLAIMS BASED IN TORT, NEGLIGENCE, PRODUCT LIABILITY,
FRAUD, MARKETING, STATE OR FEDERAL REGULATIONS, ANY CLAIMS REGARDING THE ENFORCEABILITY OF THIS LIMITED WARRANTY, AND THE WAIVER OF CLASS ACTION
TRIALS between You and Luminance Brands, either party may choose to resolve the dispute by binding arbitration, as described below, instead of in court. THIS MEANS IF EITHER YOU OR
LUMINANCE BRANDS CHOOSE BINDING ARBITRATION, NEITHER PARTY SHALL HAVE THE RIGHT TO LITIGATE SUCH CLAIM IN COURT OR HAVE A JURY TRIAL. DISCOVERY AND
APPEAL RIGHTS ARE LIMITED IN BINDING ARBITRATION. You and Luminance Brands agree that the proper venue if Arbitration is not so chosen by You or Luminance Brands of all actions
arising in connection herewith shall be only in the state of Ohio and the parties agree to such jurisdiction.
CLASS ACTION WAIVER: BINDING ARBITRATION MUST BE ON AN INDIVIDUAL BASIS. THIS MEANS NEITHER YOU NOR LUMINANCE BRANDS MAY JOIN OR CONSOLIDATE CLAIMS
IN ARBITRATION BY OR AGAINST OTHERS, OR LITIGATE IN COURT OR ARBITRATE ANY CLAIMS AS A REPRESENTATIVE OR MEMBER OF A CLASS OR IN A PRIVATE ATTORNEY
GENERAL CAPACITY.
ADMINISTRATION OF ARBITRATION: The binding arbitration must be administered by the American Arbitration Association (“AAA”) in accordance with its Commercial Arbitration Rules and/or
Supplementary Procedures for Consumer-Related Disputes (including proceedings to mitigate costs of travel). This binding arbitration is governed by the Federal Arbitration Act (“FAA” (9 USC
§1, et. seq.) and will govern the interpretation and enforcement. The binding arbitration shall be held at a location determined by AAA or at such other location as mutually agreed In addition to
the terms stated above, the following will apply to the binding arbitration: (1) the arbitrator, and not any federal, state, or local court or agency, will have exclusive authority to resolve any dispute
relating to the interpretation applicability, enforceability or formation of this agreement including any claim that all or any part of this agreement is void or voidable; (2) the arbitrator shall apply
Ohio law consistent with the FAA.
How State and Provincial Law Relates To The Warranty:
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to You. This limited warranty gives
you specic legal rights, and You may also have other rights which vary from state to state or province to province.
370 Falls Commerce Pkwy.
Cuyahoga Falls, OH 44224
READ AND SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
a. Use this unit only in a manner intended by
the manufacturer. If you have questions,
contact the manufacturer.
b. Before servicing or cleaning unit, switch
power off at service panel and lock
service panel disconnecting means to
prevent power from being switched on
accidentally. When the service discon-
necting means cannot be locked, securely
fasten a warning device, such as a tag, to
the service panel.
WARNING
!
Part No. F40BP74120003 Form No.BP7412-3
Revision: 12032020 Printed in China 12/2020
Ceiling Fan/Light Remote Control
Owner’s Manual
Safety Instructions
1. Read your Owner’s Manual carefully before
installing the Fan/Light Remote Control.
Retain Owner’s Manual for future reference.
2. Make certain no bare wires are exposed outside
the wire connectors.
3. Do not mount the Fan/Light Transmitter near
heat producing equipment.
4. All wiring must be in accordance with the
National Electrical Code “ANSI/NFPA
70-2017” and Local Electrical Codes. Use the
National Electrical Code if Local Codes do
not exist. If you feel you do not have enough
electrical wiring knowledge or experience, have
your Fan/Light Control installed by a licensed
electrician. Electrical installation should be
made or approved by a licensed electrician.
5. Use of this Control with some Ceiling Fans
could result in fire, shock and serious personal
injury. Use this Fan/Light Control only with
capacitor speed controlled Ceiling Fans.
Model Number: SR400
• 4-Speed Hand Held Transmitter
• Single Light
• Supplied with Receiver
• Includes Light Dimming Selection Switch
• 4-Speed Hand Held Transmitter
• Single Light
• Use with SR400 or SW405
• Includes Light Dimming Selection Switch
Model Number: SR401

1.1: Preset Memory Feature
Your Ceiling Fan consists of a Hand-Held Remote
Control Transmitter and a Receiver which is mounted
under the Fan Ceiling Cover.
Fan installation must be completed,
including the installation of the fan blades,
before testing the remote control.
WARNING
!
2Model No.: SR400/SR401
Remote Control Procedures
7
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
Model No.: SR400/SR401
1.2: Installation of Batteries
1. The Remote Control Transmitter is powered by
two AAA Alkaline Batteries.
2. To prevent possible battery leakage damage, be
sure to remove the Batteries when the Control is
not to be used for an extended period of time.
3. Remove the Battery Cover by pressing rmly
below the arrow and sliding the Cover off the
Remote Control.
4. Install two new AAA Alkaline Batteries into the
Battery Compartment following the correct Battery
placement printed on the Compartment (Figure 1).
NOTE: Never use old and new Batteries together in
unit.
Figure 1
Your Receiver is equipped with a preset memory
feature. If the AC supply to the Receiver is powered
through a Wall Switch, when the Switch is turned
OFF, the Control will remember the Light Intensity
and Fan Speed.
When the Switch is turned back ON the light and fan
will resume operation as they were prior to the Switch
being turned OFF.
5. Replace the Battery Compartment cover by
sliding the Cover back onto the Remote Control.
REMOTE CONTROL
BATTERY
COMPARTMENT
COVER
TWO AAA
BATTERIES
1.3: Setting Frequency
5. Remove the Battery Cover by pressing rmly below
the arrow and sliding the Cover off the Control
(Figure 2).
6. Your Remote Control has Code Switches
which must be set in one of 32 possible code
combinations.
7. The ve levers (numbered 1, 2, 3, 4, and 5) on the
switches are factory-set in the ON (up) position.
Change the Switch settings as follows:
8. Slide the ve Switch Levers in the Remote Control
to your choice of ON (up) or down positions. Use a
ball-point pen or small screwdriver and slide the
Levers rmly up or down (Figure 2).
9. The sixth Switch marked ON and I is for dimming
control of lights: Set Switch to ON to allow for
dimming of the lights. Set Switch to I for no
dimming of the lights.
NOTE: If your Fan and Light go on and off without
using your Control, you may be getting interference
from other remote units such as garage door openers,
car alarms or security systems.
To remedy this situations, simply change the
combination code in your Remote Control Transmitter.
CODE
SWITCHES
REMOTE CONTROL
BATTERY
COMPARTMENT
COVER
REMOTE CONTROL
LEVERS
ON
1234
5I
Figure 2
Troubleshooting
Fan/Light Fails to Operate
• Check that the speed control switch (if pull chain)
on the fan is set to HIGH speed.
• Check that the light switch (if pull chain) on the fan
is ON.
• Check that the battery is good (power indicator
light should light when any button is pressed).
• Check that the receiver is wired properly.
Short Range
• If the remote control operates the fan when close
to it, but does not operate it at a distance of
40 feet, try placing the antenna wire outside of the
ceiling cover.

6Model No.: SR400/SR401 3
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
Model No.: SR400/SR401
Receiver Installation
To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box
before wiring.
NOTE: If you are not sure if the outlet box
is grounded, contact a licensed electrician
for advice, as it must be grounded for safe
operation.
WARNING
!
2.1
NOTE: Make all wiring connections using wire
connectors (supplied). Make sure that all
connections are tight, including ground, and that no
bare wire is visible at the wire connectors, except for
the ground wire.
1. After electricity has been turned OFF at main fuse
box or circuit breaker box, remove the ceiling
cover from the hanger bracket.
2. Disconnect the supply wiring to the fan by
removing wire connectors.
2.2: (Figure 3)
3. Securely connect the Receiver White Wire
(AC IN N) to the Supply White Wire (neutral)
using the 12 ga. Wire Connector, supplied.
4. Securely connect the Receiver Black Wire
(AC IN L) to the Supply Black Wire (HOT) using
the 12 ga. Wire Connector, supplied.
5. Securely connect the Receiver White Wire
(TO MOTOR N) to the Fan Motor White Wire
using the 18 ga. Wire Connector, supplied.
6. Securely connect the Receiver Black Wire
(TO MOTOR L) to the Fan Motor Black Wire using
the 18 ga. Wire Connector, supplied.
7. Securely connect the Receiver Blue Wire
(TO LIGHT) to the Fan Motor Blue Wire using the
18 ga. Wire Connector, supplied.
Check to see that all connections are tight
and that no bare wires are visible at the wire
connectors.
WARNING
!
NOTE: Do not disconnect the green/bare ground
wires.
CAUTION: If no light exist on your ceiling fan, cap
the blue wire on the receiver with a wire connector.
NOTE: Failure to properly connect the receiver wires
will damage the device and render it non-operable
ANTENNA
RECEIVER
GND
STANDARD ON-OFF WALL
SWITCH OR OPTIONAL
SW406 WALL CONTROL
BLACK
BLACK
WHITE
BLACK or RED
BLACK
WHITE
HANGER BALL
GREEN WIRE (GROUND) FROM
HANGER BALL AND HANGER
BRACKET
TWO-CONDUCTOR
CABLE
(WITH GROUND)
BLACK
(HOT)
WHITE
GROUND
TO
120-VOLT
SUPPLY
WHITE
BLUE
WHITE
BLUE
Figure 3
Remote Control Operation (Continued)
3.4: Storage Bracket Installation
1. Storage Bracket is provided for holding your
Remote Control when not in use. If you desire to
use the Bracket, install it on a Wall that is away
from excess heat or humidity.
2. Slide the Wall Bracket Cover up to expose the
Screw Holes for installation (Figure 8).
3. Position the Bracket on the Wall in desired
location.
Figure 8
3.5
4. Install the two Screws (provided with bracket)
into the Wall Bracket and tighten to secure to Wall
(Figure 9).
5. Slide the Wall Bracket Cover back down over the
Screws.
Refer to the Ceiling Fan Owner’s Manual to complete
this installation.
Figure 9
TO INSTALL BRACKET TO
WALL:
SLIDE THE COVER UP TO
EXPOSE THE SCREW
HOLES FOR INSTALLATION
COVER
WALL
BRACKET
SCREW
HOLES (2)
TO INSTALL BRACKET
TO WALL:
INSTALL THE TWO SCREWS
SLIDE THE COVER DOWN
WALL
BRACKET
SCREWS (2)
COVER

4Model No.: SR400/SR401
Remote Control Operation
5
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
Model No.: SR400/SR401
Receiver Installation (Continued)
2.3: (Figure 4)
8. Position the Antenna Wire on top of the Receiver.
9. Slide the Receiver completely onto the Hanger
Ball, nestled in the Hanger Bracket.
10. While inserting the Receiver fully into the Hanger
Bracket, turn Wires upward and carefully push
Wires into the Outlet Box, with the White and
Green Wires on one side of the Outlet Box and
position the Black and Blue Wires on the other
side of the Outlet Box.
11. Reinstall the Ceiling Cover taking care not to
pinch any Wires.
12. Reinstall the electrical power to the circuit.
To avoid possible fire or shock, make sure
that the electrical wires are completely inside
the outlet box and not pinched between the
ceiling cover and the ceiling.
WARNING
!
WIRE
CONNECTORS
(Tucked Inside
Outlet Box)
ANTENNA
RECEIVER
HANGER
BRACKET
Figure 4
Refer to the Ceiling Fan Owner’s Manual to complete
this installation.
Figure 5
POWER INDICATOR
LIGHT
FAN OFF
BUTTON
3.1
1. When power is restored, push and hold the Fan
OFF Button ( ) for 3 to 5 Seconds to set the
Code in the Receiver (Figure 5).
NOTE: The Ceiling Fan Lights (if installed) will Blink
to indicate the Transmitter has been paired with the
Receiver.
2. To turn the Ceiling Fan OFF, press and release the
Fan OFF Button ( ).
3.2
3. The Remote Control is designed to separately
control your Ceiling Fan Speed and Light Intensity
(Figure 6).
4. There are Four Push Buttons (.,..,...,....)
to set the Fan Speed.
Figure 6
HIGH TO LOW
BUTTONS
POWER INDICATOR
LIGHT
3.3
5. The Light Push Button ( ) turns the Light
ON and OFF and controls the Light Intensity
(Figure 7).
6. To vary the Intensity of the Light, hold the
Light Button ( ) down until the desired Light
Intensity is reached, then release the Button
(Figure 7).
NOTE: When turning the light on, light will turn on at
the light intensity previously selected.
7. Your Remote Control has full control of your
Fan and Light.
8. The Power Indicator Light (blue glow) will
Illuminate while any Button is pressed,
indicating that the Battery is good.
Figure 7
POWER INDICATOR
LIGHT
LIGHT BUTTON
FOR FANS WITH PULL CHAINS: For your Fan/Light
Control to operate properly, the Fan Pull Chain Switch
must be set to operate the Fan at HIGH Speed, and the
Light Kit must be switched to ON position. To avoid
accidental Pull Chain use, shorten Chains.