Lumisys MX08 User manual
Installation Guide
1025 Cobb Place Blvd Suite 100 Kennesaw, GA 30144 • 800-241-9173 • www.anybas.com
Lumisys MX Series
www.anybas.com
Due to continuous product improvement, Lumisys reserves the right to change product specications without notice.
Page 2
Installation Guide
Mx Series
Lighting Relay Panel
0726070122
Lumisys is a Registered Trademark
This section serves as a notice of the immediate or potential dangers involved when working with
the equipment described throughout this manual. Any person involved in installation, maintenance,
or service of the equipment should first carefully examine the equipment and read the instructions
contained in this manual to ensure that personal and/or equipment injury is avoided.
The following safety messages are used throughout this manual to alert of immediate or potential
danger to life or property:
In addition, this symbol may appear in the margin of specific portions of text as a safety reminder.
Applicable instruction steps will be listed beneath the symbol.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designated to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his own
expense.
Instructions contained in this user’s guide should be performed only by qualified persons in
accordance with local and national codes. Lumisys® Lighting and its affiliates assume no
responsibility for any consequences related to the improper use of this manual.
CAUTION: Used without the safety alert symbol, indicates a potentially haz-
ardous situation which, if not avoided, can result in personal or
property damage. Failure to comply with proper handling of the Lumisys
products may void your warranty
ATTENTION
DANGER! Indicates an immediately hazardous situation which,
if not avoided, will result in death or serious injury.
!
WARNING! Indicates a potentially hazardous situation which, if
not avoided, can result in death or serious injury.
!
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, can result in minor or moderate injury.
!
Disclaimer
Hint Indicates a tip or trick to help you.
Note Indicates an important note.
www.anybas.com
Due to continuous product improvement, Lumisys reserves the right to change product specications without notice.
Page 3
Installation Guide
Mx Series
Lighting Relay Panel
0726070122
Lumisys is a Registered Trademark
Table of Contents
Overview ..............................................................................................................
Inspection ............................................................................................................
Installation ............................................................................................................
Connecting the Power Supply .............................................................................
Connecting the Power Supply con’t .....................................................................
Connecting Branch Circuit Wires .........................................................................
Connecting Branch Circuit Wires con’t ................................................................
Connecting Switch Inputs ....................................................................................
Connecting Switch Inputs con’t ............................................................................
Connecting the RS-485 Network .........................................................................
Connecting Lumisys LS5 Photocell Inputs ...........................................................
Adding and Removing LTR Relays ......................................................................
Connecting to Digi-Touch Addressable Switch Network ......................................
Terms and Conditions of Sale ..............................................................................
3
4
5
6
7
8
9
10
11
12
13
14
15
16
www.anybas.com
Due to continuous product improvement, Lumisys reserves the right to change product specications without notice.
Page 4
Installation Guide
Mx Series
Lighting Relay Panel
0726070122
Lumisys is a Registered Trademark
Product Family Comparison
MX08 MX16 MX32 MX48 MX60
Panel
Dimensions (Width x Height x Depth) 13” x 16” x 4” 18” x 25” x 5 3/4” 18” x 33 3/4” x
5 3/4”
18” x 45 1/2” x
5 3/4”
18” x 45 1/2” x
5 3/4”
Contactor Mounting Space N/A 8.0” x 8.0” x 5.0” 8.0” x 8.0” x 5.0” 8.0” x 8.0” x 5.0” N/A
Trim Style Screw on Tru-lock Tru-lock Tru-lock Tru-lock
Controller Lx5 Lx5 Lx5 Lx5 Lx5
Flash Upgrade Yes Yes Yes Yes Yes
Inputs
Digital Subnet for Switches and Occupancy
Sensors
Digi-Touch Native Digi-Touch Native Digi-Touch Native Digi-Touch Native Digi-Touch Na-
tive
Binary inputs available without option card 24 24 56 88 120
Analog Inputs available without option card 6 6 6 6 6
Optional Telephone Override Card No Yes Yes Yes Yes
Outputs
Relay Panel Capacity 8 16 32 48 60
Latching Relay with manual override on relay Yes,
Lumisys True
Relay (LTR)
Yes,
Lumisys True
Relay (LTR)
Yes,
Lumisys True
Relay (LTR)
Yes,
Lumisys True
Relay (LTR)
Yes,
Lumisys True
Relay (LTR)
Warranty 24 months from date of shipment.
Refer to Lumisys Terms and Conditions of Sale for additional details.
This document provides instructions on how to physically install the Lumisys MX Series Lighting Relay Panel. For panel
conguration and programming refer to Maxiom User’s Guide- Hardware and Maxiom User’s Guide - Software. For network
point descriptions and integrations to a building automation system refer to the appropriate Maxiom Integration Guide.
Overview
www.anybas.com
Due to continuous product improvement, Lumisys reserves the right to change product specications without notice.
Page 5
Installation Guide
Mx Series
Lighting Relay Panel
0726070122
Lumisys is a Registered Trademark
The MX Series comes in ve basic units based upon relay capacities: MX08, MX16, MX32, MX48, and the MX60. Each unit may
contain up to the number of relays indicated. Enclosure sizes for each of the ve units will vary
Pictures of the MX08 and MX32 appear below showing the main components. Check each unit for shipping damage or missing
parts
Inspection
1) Power Supply and fuse
2) LTR Relays
3) High Voltage Sections
4) Low voltage section
5) Contactor space
6) LX5 main processor electronics
7) RIB relay interface board electronics (not
visible on MX08)
8) Surface mounted cover (MX08)
9) LEXP input expansion electronics
10) True lock screw
11) Ground nut
12) Surface mounted cover w/ hinged door
13) Removable, one-piece interior frame
MX32 cover
!
!
High Voltage
Section
High Voltage
Section 3
3
Low Voltage Section
4
12
13
2
1
6
MX08 Cover
MX32
MX08
13
1
!
High Voltage
Section 3
Low Voltage Section
4
2
67
10
11
5
9
8
11
11
This manual suits for next models
4
Table of contents
