LuxaFlex PowerView Pebble Remote User manual

PowerView®Reference Guide
CONTENTS
Last update August, 2018
Getting Started
PowerView®Pebble®Remote
PowerView® Repeaters
PowerView®App &
Hub Setup and Operation
PowerView®Scene Controller
Troubleshooting

[ 3 ][ 2 ]
CONTENTS
Getting Started
Create a Shortcut to the PowerView® Reference Guide
Create a Shortcut to the PowerView® Reference Guide .......................................................3
Apple® iPad® or iPhone®
1. Open the Safari web browser and type:
https://www.luxaflex.co.uk/power-
view-reference-guide/ then press “Go” on
the keyboard. The guide will open.
2. Select the Forward button.
3. Select “Add to Home Screen”.
4. Select “Add”.
Your icon shortcut will now
be visible from your home
screen.
Follow the steps below to create a direct link or shortcut to the PowerView® Reference Guide on an iOS or Android™
device. The guide is located at https://www.luxaflex.co.uk/customer-support/installation/
Android™
1. Open the Chrome web browser
and type the exact same address as
above.
2. Select the menu icon ( ).
3. Select “Add to Home screen”.
4. Select “Add” *.
NOTE: Android devices come in a
variety of brands and models and
the process for adding a shortcut
may differ. Please consult your
device documentation, if necessary,
for adding shortcuts to your home
screen.
Your icon shortcut will
now be visible from your
home screen.
1
2
3
4
1
2
3
4

[ 5 ][ 4 ][ 4 ]
CONTENTS
PowerView® Pebble® Remote
Getting Started with the PowerView® Pebble® Remote .......................................................5
Programming Mode ..........................................................................................6
Pairing Remotes ..............................................................................................7
Duplicating a Remote ........................................................................................8
Selecting & De-selecting Groups .............................................................................9
Joining a Shade to a Group ..................................................................................10
Removing a Shade from a Group ............................................................................11
Setting a Favorite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Product Operation: Groups 1-6 ..............................................................................13
Product Operation: ALL Button ..............................................................................14
Product Operation: Favorite Button..........................................................................15
Product Operation: Top-Down/Bottom-Up ..................................................................16
Product Operation: Top-Down/Bottom-Up special move....................................................17
Product Operation: Silhouette® Shades ......................................................................18
Product Operation: Venetian Blinds..........................................................................19
Product Operation: Vertical Blinds ...........................................................................20
Product Operation: Roller Blinds & Roman Blinds ............................................................21
Product Operation: Duette® and Plissé Shades...............................................................22
Product Operation: Twist® Shades ...........................................................................23
Mounting the PowerView® Surface ..........................................................................24
Battery Replacement ........................................................................................25
Inserting the Remote Module into the Pebble®..............................................................26
Getting Started with the PowerView® Pebble® Remote
Manual Control Configurations
Groups (1-6)
Select or de-select Group
numbers for programming
or operation.
Stop
Stops shade in any position.
Also used to enter and exit
programming mode.
Vane Open/
Close Arrows
Operate vanes.
All
Operate all groups
simultaneously.
Open
Move shade to fully
open position.
Favorite
Default setting is 50%
open. Customize
to move shade to
a custom favorite
position.
Close
Move shade to fully
closed position.
Key to Operation
The manual control button, located on the headrail, is different depending on the product. See images for product examples.
Plissé & Duette® Shades
Venetian Blinds Roman Blinds
Plissé & Duette® Shades
(EOS® hardware).
Roller Blinds
Vertical Blinds Twist® Shades
Roller Blinds 230V

Source
Target
NOTE: Group number (1-6) buttons
will flash twice on the initial press
of Reset button, then again at six
seconds. Target remote now ready
to receive information from source
remote.
Target
Source
Source
Target
NOTE: Group numbers on target
remote will flash twice to indicate it
has been networked to the source
remote.
NOTE: If NO shades have been
joined to a group number
(1-6) on a remote, choose
any remote to be the Source
remote. Otherwise, choose
the remote that was used to
program/operate shade(s) to
be the Source remote. A target
remote receives information
from the source remote.
1
1
4
5
2
3
1
[ 6 ] [ 7 ]
Press and Hold n(Stop) on remote
until indicator lights blink.
(approximately 6 seconds)
Programming Mode
Programming Mode is required to perform key remote related programming procedures. In programming mode,
you can set a variety of functions, from joining a shade to a Group number (1-6) on a remote to removing a shade
from a Group number (1-6), to setting Favorite shade positions. You must activate programming mode on the
PowerView® Pebble® Remote to establish communication between the remote and shade.
Enter Programming Mode
Exit Programming Mode
Press and Hold n(Stop) on remote
until indicator lights stop blinking.
(approximately 6 seconds)
NOTE: Programming mode automatically times out at 20 seconds. Programming mode extends by an additional 20 seconds
simply by pressing any button on the remote.
Simultaneously. . .
PRESS and RELEASE n(Stop) on source
remote. RELEASE (Stop) on target remote.
Using a paper clip, PRESS and HOLD
recessed Reset button on back of
target remote for 6-10 seconds. If
necessary, remove back cover.
PRESS and CONTINUE TO HOLD
n(Stop) on target remote.
On source remote, PRESS and HOLD
n(Stop) until indicator lights begin
to blink. Source remote is now in
Programming Mode.
SELECT a source and a target(s) remote.
Pairing Remotes
Each PowerView® Remote comes with its own unique Radio Frequency (Network) ID. If multiple
remotes (ie. PowerView® Pebble® and/or PowerView® Surface Remotes) will be used in the home,
PAIR ALL REMOTES BEFORE JOINING ANY WINDOW COVERING TO GROUP NUMBER(S) (1-6)
ON ANY REMOTE. This is done to ensure that if a PowerView® Hub or PowerView® Repeater(s) is to
be used in the future, it can operate previously programmed window coverings in the home and be
used in conjunction with all the remotes on a single, unified PowerView® Shade Network. Otherwise,
some window coverings will be unresponsive to commands sent from the Hub or Repeaters.
RELATED TOPICS
RELATED TOPICS

NOTE: Deselected/inactive
Group numbers are not
illuminated.
NOTE: Selected/active Group
number(s) (1-6) are illuminated.
5
[ 8 ] [ 9 ]
Duplicating a Remote
Duplicating a remote copies a remote’s unique Group programming information and transfers it to
another remote so that they are essentially identical. Window coverings programmed to operate
with one remote will also respond to commands from a duplicated remote. Duplicating a remote
is not the same as pairing multiple remotes to a PowerView® Shade Network.
Source
Target
NOTE: Group number (1-6) buttons
will flash twice on the initial press
of Reset button, then again at six
seconds. Target remote now ready
to receive information from source
remote.
Target
Source
Target
NOTE: The source
remote is the remote
to be duplicated. The
target remote is the
remote that receives
the source remote’s
Group programming
information.
4
2
3
1
Using a paper clip, PRESS and HOLD
recessed Reset button on back of
target remote for 6-10 seconds. If
necessary, remove back cover.
Simultaneously. . .
PRESS and RELEASE n(Stop) on source
remote. RELEASE All on target remote.
PRESS and HOLD All on target
remote.
On source remote, PRESS and HOLD
n(Stop) until indicator lights begin
to blink. Source remote is now in
Programming Mode.
SELECT the source remote. SELECT the target remote.
NOTE: The Group numbers (1-6) on
the target remote will flash twice. This
indicates that the source remote’s
Group programming information has
been duplicated and transferred to
the target remote. Both remotes are
now identical.
1
1
PRESS and RELEASE desired Group
number(s) (1-6)
PRESS and RELEASE desired Group
number(s) (1-6).
Selecting & De-selecting Groups
Before operating a single window covering you must first select its corresponding Group number (1-6) or the ALL
button. Multiple Group numbers can be selected for simultaneous operation in any combination. Group numbers
can be selected or deselected. Like any Group number, the ALL button can also be selected or deselected;
however, its selection will override any active Group(s).
Selecting a Group
De-selecting a Group
RELATED TOPICS
RELATED TOPICS

2
SELECT desired Group number
(1-6).
Note: Shade will jog to indicate
this position is the new Favorite
position.
2
PRESS and RELEASE desired Group
number (1-6).
Note: Shade will jog to indicate
it has been successfully
removed from the selected
Group.
11
[ 10 ] [ 11 ]
Manual Control
Button
Headrail
PRESS and HOLD n(Stop) on
remote until indicator lights blink.
Joining a Shade to a Group
To operate shades using a remote, shades must be joined to a Group number (1-6) on the remote.
A single shade can be joined to multiple Groups on a remote, if desired.
Manual Control
Button
Headrail
4
3
Note: To position additional shades,
repeat step 3 for each shade while
remote is in Programming Mode.
a. PRESS and HOLD manual control button on shade headrail. Then...
b. PRESS and RELEASE Open on remote.
RELEASE manual control button on
shade headrail.
4
a. PRESS and HOLD manual control button on shade headrail. Then...
b. PRESS and RELEASE Close on remote.
PRESS and HOLD n(Stop) on
remote until indicator lights blink.
Removing a Shade from a Group
Manual
Control
Button
Headrail
3
Manual Control
Button
Headrail
Note: To remove additional shades
from the same Group, repeat step
3 for each shade while remote is in
Programming Mode.
RELEASE manual control button on
shade headrail.
RELATED TOPICS
RELATED TOPICS

2
PRESS and HOLD n(Stop) on
remote until indicator lights blink.
Note: Shade will jog to indicate
that the new Favorite setting
has been applied.
A. Open on the remote to open shade
B. Close on the remote to close shade
C. Right Arrow for vane operation
D. Left Arrow for vane operation
Manual Control
Button
Headrail
4
Note: To position additional shades,
repeat step 3 for each shade while
remote is in Programming Mode
3
1
[ 12 ] [ 13 ]
a. PRESS and HOLD manual control button on shade headrail. Then...
b. PRESS and RELEASE Favorite on remote.
Use remote to move shade(s) to
desired Favorite position.
Setting a Favorite
All shades come from the factory with a default Favorite position set at 50% open. If you prefer a
different shade position, you can create a custom Favorite.
Manual Control
Button
Headrail
2
Product Operation: Groups 1-6
PRESS and RELEASE either:
DC
A
B
1
3
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
PRESS and RELEASE desired Group number (1-6).
NOTE: Group numbers
(1-6) are selected or
deselected by pressing
the desired Group
number(s). Selected
Group numbers are
illuminated to indicate
they are active. Multiple
Groups can be selected
for simultaneous
operation.
RELEASE manual control button on
shade headrail.
RELATED TOPICS
RELATED TOPICS

2
NOTE: To de-select ALL, press
any Group number.
PRESS and RELEASE either:
A. Open on the remote to open shade
B. Close on the remote to close shade
C. Right Arrow for vane operation
D. Left Arrow for vane operation
DC
A
B
13
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
1 2
[ 14 ] [ 15 ]
PRESS and RELEASE All button.
Product Operation: ALL Button
The ALL button allows all Grouped shades to be operated simultaneously.
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
Product Operation: Favorite Button
The Favorite button moves selected Grouped shades to their individually set Favorite positions. All shades come
from the factory with a default Favorite position set at 50% open. If you prefer a different shade position, you can
create a custom Favorite.
PRESS and RELEASE Favorite
button.
RELATED TOPICS
RELATED TOPICS

2
PRESS and RELEASE either:
With Shade in Fully Closed Position
A. Open to raise bottom rail
B. Left Arrow to lower middle rail
With Bottom Rail in Partially or
Fully Raised Position
A. OPEN to raise bottom rail
B. LEFT ARROW to lower bottom
rail, then middle rail
C. RIGHT ARROW to lower bottom
rail
D. CLOSE to lower bottom rail
With the Middle Rail in an
Intermediate Position
A. Open to fully raise middle rail,
then raise bottom rail
B. Left Arrow to lower middle rail
C. Right Arrow to raise middle rail
D. Close to fully raise middle rail
With Middle Rail Fully Lowered
A. Open to fully raise middle rail,
then fully raise bottom rail
B. Right Arrow to raise middle rail
C. Close to fully raise middle rail
B
A
C
B
A
NOTE: Bottom- and middle rail can
be moved independantly at the
same time to any desired position,
considering physical restrictions.
2
PRESS and RELEASE either:
A. Open to raise bottom rail
B. Close to lower bottom rail
C. Right Arrow to raise middle rail
D. Left Arrow to lower middle rail
DC
A
B
1 1
B
C
D
BC
A
D
3 3
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
A
[ 16 ] [ 17 ]
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
Product Operation: Top-Down/Bottom-Up
The PowerView® Pebble® Remote does not allow for both the middle and top rails to each have a midpoint within
the window at the same time for blinds made before 09-2017.
Product Operation: Top-Down/Bottom-Up special move
For blinds made after 09-2017, the PowerView® Pebble® Remote allows for independent rail movement at the
same time.
RELATED TOPICS
RELATED TOPICS

NOTE: Slats can be operated at
any middle point.
2
PRESS and RELEASE either:
A. Open to raise bottom rail
B. Close to lower bottom rail
C. Right Arrow to tilt the slats to
the desired open position
D. Left Arrow to tilt the slats to
the desired closed position
DC
A
B
1 1
3 3
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
[ 18 ] [ 19 ]
Product Operation: Silhouette® Shades
With Shade in Fully Raised,
Open Position
A. CLOSE to lower shade
B. LEFT ARROW to lower shade
(vanes will fully close)
C. RIGHT ARROW to lower shade
(vanes will fully open)
PRESS and RELEASE either:
2
BC
A
CB
A
With Shade in Fully
Lowered Position
A. OPEN to fully raise the shade
B. RIGHT ARROW to tilt vanes
open
C. LEFT ARROW to tilt vanes
closed
D. CLOSE to fully close vanes
D
Product Operation: Venetian Blinds
PowerView® Motorisation with Venetian Blinds can be tilt anywhere in the window position.
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
RELATED TOPICS
RELATED TOPICS

NOTE: Slats can be operated at
any middle point.
2
PRESS and RELEASE either:
A. Open to traverse the shade to
open position
B. Close to fully traverse the shade
to close position, slats in closed
position
C. Right Arrow to rotate slats
clockwise
D. Left Arrow to rotate slats
counter clockwise
DC
A
B
1
3
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
[ 20 ] [ 21 ]
Product Operation: Vertical Blinds Product Operation: Roller Blinds & Roman Blinds
2
PRESS and RELEASE either:
A. Open to raise shade
B. Close to lower shade
B
A
1
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
3
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
RELATED TOPICS
RELATED TOPICS

NOTE: Push again to move to
fully closed position
2
PRESS and RELEASE either:
A. Open to raise the shade fully
B. Close to lower the shade fully,
bands in close position
C. Right Arrow to move bands
to opened position (from fully
closed position)
D. Left Arrow to move shade to
closed position with bands open,
at slow speed
DC
A
B
1
3
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
[ 22 ] [ 23 ]
Product Operation: Duette® and Plissé Shades Product Operation: Twist® Shades
2
PRESS and RELEASE either:
A. Open to raise shade
B. Close to lower shade
B
A
1
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
3
PRESS and RELEASE n(Stop) when
the desired shade position is reached.
PRESS and RELEASE desired Group
number(s) (1-6) or ALL.
RELATED TOPICS
RELATED TOPICS

NOTE: If the texture of mounting
surface is uneven, insert the foam
spacers into the corresponding
grooves on the back side of the
Surface ring before inserting the
ring onto the mounting plate.
NOTE: The Luxaflex® logo on the
Surface remote should appear
right side up and be horizontal.
Option A.
Use the screw holes on the Surface
mounting plate to mark the location.
The Luxaflex® logo should appear right
side up and be horizontal.
Option B.
To ensure a straight and level
appearance, use a small, standard
bubble level with a ruled edge. Mark a
straight horizontal line approximately
45mm in length on the mounting
surface.
Option A.
If you are mounting the Surface onto
drywall, use a 5,5 mm bit to drill pilot
holes. Tap drywall anchors into the
pilot holes until the flange of the
anchor is flush with the drywall.
Option B.
If you are mounting the Surface onto
wood, use a 2,5 mm drill bit to drill the
screw holes.
REMOVE back cover from Remote
Module.
2
1
6
57
[ 24 ] [ 25 ]
INSERT the Surface ring around
mounting plate, ROTATING to the
right to securely lock into place.
Mounting the PowerView® Surface
3
1
PLACE the Surface mounting plate
on the mounting surface, lining up
the screw holes on the mark.
SELECT a location to mount the
PowerView® Surface.
2
With a pencil, LIGHTLY MARK the location for the PowerView® Surface on the
mounting surface
4
ATTACH the Surface mounting plate to the mounting surface using the screws
provided.
LINE UP the cut-outs on the
Surface ring with the notches on the
mounting plate.
Gently INSERT the Surface remote
into the Surface ring until it is snug,
LINING up the raised notches of the
Surface remote with the indentations
in the Surface ring.
x
Gently REMOVE Remote Module
from PowerView® Pebble®.
Battery Replacement
Replacing batteries in the PowerView® Pebble® Remote will not cause the loss of any shade programming,
including Groups and Favorites. The PowerView® Pebble Remote uses two CR 2032 batteries.
3
Remove old batteries.
5
REPLACE back cover of Remote
Module.
6
Gently REINSERT the Remote
Module into PowerView® Pebble.
4
INSERT new batteries.
RELATED TOPICS

2
INSERT the PowerView® Remote
module by GENTLY PRESSING
DOWN on the Remote until it rests
securely and snuggly in the Pebble®.
1
[ 26 ] [ 27 ]
LINE UP the raised notches around
the edge of the PowerView® Remote
module with the indentations in the
Pebble®.
Inserting the Remote Module into the Pebble®
RELATED TOPICS

3
2
3
2
1
1
[ 29 ][ 28 ]
CONTENTS
PowerView® Repeaters
Pairing a Repeater to a Remote ..............................................................................29
Pairing a Repeater to a Hub..................................................................................30
Using Repeaters with the PowerView® App..................................................................31
Using Repeaters in the PowerView® App: Scenes ............................................................32
Using Repeaters in the PowerView® App: Automations ......................................................33
Pairing a Repeater to a Remote
Repeaters extend the range of the PowerView® Shade Network. Use
Repeaters to ensure commands sent from the PowerView® Pebble® Remote,
the PowerView® Surface, or the PowerView® Hub reach PowerView® window
coverings in large rooms or multiple room applications.
NOTE: A Generation 1 (Generation 1) Repeater Kit comes packed with a USB
power source.
NOTE: A solid green light will
illuminate on the Repeater to
indicate that it is receiving power
and ready to join a network. NOTE: This puts the remote in
Programming Mode.
PRESS and HOLD n(Stop) on the
PowerView® Pebble® Remote until
indicator lights on the interior of the
remote blink.
PRESS and HOLD n(Stop) on the
PowerView® Pebble® Remote until
indicator lights on the interior of the
remote blink.
ASSEMBLE Repeater Kit. PLUG the
Repeater into an electrical outlet.
For Generation 1 Repeaters
For Generation 2 Repeaters
NOTE: The solid green light on the
Repeater will go out, indicating it
has been paired to the remote.
HOLD the remote in close
proximity to the Repeater.
PRESS n(Stop) on the remote while
the remote is in Programming Mode.
NOTE: The Repeater will flash
amber.
NOTE: This puts the remote in
Programming Mode.
PRESS and HOLD n(Stop) on the
PowerView® Pebble® Remote until
indicator lights on the interior of the
remote blink.
PLUG the Repeater into an electrical
outlet.
NOTE: The Repeater will stop
flashing.
HOLD the remote in close
proximity to the Repeater.
PRESS n(Stop) on the remote while
the remote is in Programming Mode.
GEN 1
GEN 2
RELATED TOPICS

1 2
12
1 2 3 4
1 2 3
[ 30 ] [ 31 ]
NOTE: Default light color
changes immediately.
Use slider to adjust
brightness.
From here, flash to
identify or give a
custom name.
NOTE: A solid green light will
illuminate on the Repeater to
indicate that it is receiving power
and ready to join a network.
NOTE: The solid green light on the
Repeater will go out, indicating
that it has been paired to the Hub.
Pairing a Repeater to a Hub
PRESS and RELEASE the “P” button
on the back of the Generation 1 Hub.
Ideally, Repeaters would be joined to a Hub network at the time of
installation and Hub setup using the Discover function in the PowerView®
App. However, additional Repeaters can be added to a PowerView® Shade
Network later using the Hub, if necessary.
NOTE: A Generation 1 (Generation 1) Repeater Kit comes packed with a
USB power source.
ASSEMBLE Repeater Kit. PLUG the
Repeater into an electrical outlet.
For Generation 1 Repeaters with a Generation 1 Hub
NOTE: The Repeater will flash
amber.
NOTE: The Repeater will
stop flashing.
PRESS and RELEASE the raised
“P” button on the back of the
Generation 2 Hub.
PLUG the Repeater into an electrical
outlet.
For Generation 2 Repeaters with a Generation 2 Hub
Using Repeaters with the PowerView® App
Generation 2 (Generation 2) Repeaters feature a light or glow with adjustable brightness and color. All Generation
2 Repeaters discovered in the App are considered accessories and can be accessed there or found in the Repeaters
Room. Access Generation 2 Repeaters in the Repeaters Room to change the default light color for a specific
Repeater.
NOTE: Changing or adjusting light colors on Generation 2 Repeaters can only be done using the PowerView® App.
A PowerView® Pebble® or Surface Remote cannot be used to program color changes or make brightness adjustments.
Repeaters in Accessories
TAP Menu. SELECT Repeater.TAP Repeaters.TAP Accessories.
Change Repeater Colors or Adjust Brightness
SELECT Color.SELECT Repeater.From Rooms, TAP
Repeater Room.
GEN 1
GEN 2
RELATED TOPICS
RELATED TOPICS

1 2 3
45
1 2 3
[ 32 ] [ 33 ]
Using Repeaters in the PowerView® App: Scenes
Create a Repeater(s) Scene(s) to change the light color of Generation 2 Repeaters. Then, customize shade operation
by using a Repeater Scene in a Multi-Room Scene to change a Repeater’s light color when that Multi-Room Scene
is activated.
Note: A Repeater Scene by itself will only change the light color of a Generation 2 Repeater. It will not operate
the shade. To coordinate a Repeater light color change with shade operation, include a Repeater Scene in a Multi-
Room Scene.
TAP Create Scene.
From the Scenes Tab, TAP +.
Create a Repeater Scene
SELECT Repeaters Room.
Note: Choose a custom light color
to be activated with Scene.
SELECT Repeater(s) for Scene.
TAP Save.
Using Repeaters in the PowerView® App: Automations
TAP Add Automation.
From the Automation Tab, TAP
Options.
Create an Automation
SELECT a Scene or Multiple Room
Scene containing Repeaters.
Automate Scenes and Multi-Room Scenes with Repeaters to schedule timed activation of Repeater light color
change.
RELATED TOPICS
RELATED TOPICS

[ 35 ][ 34 ][ 34 ]
CONTENTS
PowerView® App & Hub Setup and Operation
PowerView® App Overview and System Requirements ......................................................35
Getting Started with the Generation 1 Hub..................................................................36
Getting Started with the Generation 2 Hub..................................................................37
Initial App & Hub Setup......................................................................................38
Hub Setup: Wired............................................................................................39
Hub Setup: Wireless .........................................................................................40
Secondary Hub Setup: Wired ................................................................................41
Secondary Hub Setup: Wireless..............................................................................42
Migrating Hub Data .........................................................................................43
Pairing a Remote to a Hub...................................................................................44
PowerView® Account ........................................................................................45
Dashboard...................................................................................................46
Discover Shades .............................................................................................47
Discover Repeaters ..........................................................................................48
Editing Shade Details ........................................................................................49
Creating & Deleting Rooms..................................................................................50
Assigning Shades to Rooms .................................................................................51
Shade Operation ............................................................................................52
Creating, Operating and Deleting Scenes and Multi-Room Scenes ..........................................53
Creating, Enabling & Disabling, and Deleting Automations ..................................................54
Automations: Sunrise/Sunset ................................................................................55
Using RemoteConnect™ ....................................................................................56
System Requirements for the PowerView® App
The PowerView® App allows for customized control and operation of PowerView® window coverings from
Apple® iOS and Android™ tablet or mobile devices. For households wishing to use the PowerView® App to
operate shades, as well as utilize the many advanced whole home integration features available through
PowerView®, the PowerView® Hub is required. PowerView® features compatibility with a variety of 3rd party
control systems and devices through cloud-to-cloud and IP integration. Advanced features such as integration
with Apple®HomeKit™, voice activation of shades via Amazon Alexa products or with Siri on iOS devices, the
Generation 2 (Generation 2) Hub is required.
System Requirements for the PowerView® App
To finalize the installation of all PowerView® window coverings in the home for customers wishing to use the
PowerView® App, it will be necessary to establish a PowerView® network using the Hub.
PowerView® App Minimum Requirements
– Mobile device (iPad, iPod touch or iPhone with iOS 9.0 or higher installed)
– Android device running version 4.4 (Kit Kat or newer)
– PowerView® Hub Kit
– PowerView® Hub
– Ethernet Cable
– USB Power Supply and Power Supply Cable
– Home Internet service
Download and Install the PowerView® App from the App Store or Google Play
PowerView® App Overview and System Requirements

[ 36 ] [ 37 ]
Getting Started with the Generation 1 Hub
Ethernet Port
Connects
Ethernet cable to
a router.
Power
Plug USB cable in
to port to power
the Hub.
Test
Sends signal to
repeaters to test.
Data Erase
Press for 6 seconds to
erase all data stored
on the Hub.
Generation 1
Repeater
Generation
1 Repeater
Power Supply
Generation 1 PowerView® Hub
PowerView® Hub
Power Supply
Ethernet Cable
USB Power Supply Cable
RS232
Plug allows
connection
to Home
Automation.
Reset
Pressing the
reset button
reboots the
system.
Generation 1 Hub and Generation 1 Repeater Components
Back of Generation 1 Hub
Getting Started with the Generation 2 Hub
Generation 2
PowerView® Hub
Ethernet Cable
USB Power
Supply Cable
Generation 2
Repeater
Generation 2 Hub
Power Supply
Ethernet Port
Connects
Ethernet cable to
a router.
Power
Plug USB cable in
to port to power
the Hub.
Reset
Press to cycle
power. Press and
hold to reset/clear
Hub data.
Back of Generation 2 Hub
“P” Button
Used for pairing
and sending
test signals to
repeaters.
Reset
Press and hold until
LED turns sold amber
(6-10 seconds) to
reset.
Generation 2 Hub and Generation 2 Repeater Components

1
234
[ 38 ] [ 39 ]
NOTE: When fully completed,
Hub light will turn solid blue.
Initial App & Hub Setup
A PowerView® Hub is required to use the PowerView® App. To connect to and/or setup a Hub for operation
of PowerView® window coverings using the App, open the PowerView® App on your mobile device and follow
the on-screen instructions. For new Hub setup, you will be guided through the setup process. This may include
Hub wireless configuration (if necessary), pairing any PowerView® remotes to a single PowerView® network (if
necessary), and pairing any PowerView® Remote to the Hub (if necessary).
Note: Always connect a Hub to power before beginning the setup procedure. For the installation and setup of
Generation 2 (Generation 2) Hubs, you can choose to proceed using a wireless configuration or using an Ethernet
connection.
Hub Setup: Wired
Connecting a PowerView® Hub via ethernet to an internet connected router is the most reliable
method to ensure uninterrupted internet access during Hub setup and operation.
Follow setup sequence as instructed
in App.
OPEN PowerView® App. SELECT
New Hub.
PRIOR TO INSTALLATION
CONNECT Hub to: A) Ethernet then B) Power.
SELECT New Setup.
NOTE: Allow Hub to automatically
seek, retrieve, and install firmware
update. Hub LED sequence will go
from blinking aqua, to solid amber,
to blinking amber. Do not interrupt
this process. After a firmware
update, Hub will reboot. Firmware
update may take several minutes.
A
A
B
B
RELATED TOPICS
RELATED TOPICS