Luxair LA-1200-Jet User manual

Thank Your For Your Purchase Of The New Jet Ceiling Cooker Hood
JET CEILING HOOD INSTALATION MANUAL

Thank Your For Your Purchase Of The New Jet Ceiling Cooker Hood
Before you begin make sure you
have your installation team check
that all dimensions are correct.
It is advised that you seek advise
on the correct fixings and the
structure of you ceiling is adequate
in order to support this ceiling
cooker hood.
This cooker hood needs to be fitted
in a lowered box section if your
ceiling joists are not within the
minimum and maximum
restrictions.
It is alway advisable to check these
distances first.
The sub frame on this ceiling hood can
be modified to suit each application.
This top frame can be removed and the
hood can be secured using the upright
legs only if required.
WARNING
Make sure the fixings (not supplied)
are adequate to support the weight of
this hood, it is advised to use at least 4
fixings to each led support.

Thank Your For Your Purchase Of The New Jet Ceiling Cooker Hood
Make all the necessary height
adjustments to your required
specifications.
Ensure you make good all fixings
on the upright legs using nuts and
bolts (not supplied) as required.
A minimum of 4 x each leg.
As with the above instructions
please now secure the main frame
to your joists using minimum of 6 x
coach bolts or coach screws.
It is not necessary to use this frame
part if your leg fixings are adequate
and secure however always try to
use this if possible.
Ensure that your ceiling cut out
dimensions or lowered box section is
correct and that you dry fit the hood
prior to full installation takes place.
Make adjustments where necessary

Thank Your For Your Purchase Of The New Jet Ceiling Cooker Hood
Warning:
The next step is a two man job.
Now lift the main body section of your
hood and secure the four fixing screws
to each leg section.
It is advisable to check the direction
of your ducting system before you
make good your final fix.
The motor on this hood can be rotated
360 degrease if required.
WARNING
The ducting system for this ceiling
hood in a minimum 5" (125mm) but
6" (150mm) is highly recommended
to increase efficiency.
Please try to use the least number of
bends and turns as possible and
always take the most direct route to
the outside wall.

Thank Your For Your Purchase Of The New Jet Ceiling Cooker Hood
Once you have secured the cooker
hood to the sub-frame, remove
the metal grease filters to gain
access to the motor housing.
You will now need to connect the
ducting system and electricity
supply.
Now connect your ducting and
electricity supply.
WARNING
This hood must be fitted using a
3amp fuse, do not use a 13amp
fuse as this will void your
warranty.
A reducer collar from 6" to 5" can
be purchased direct from
Luxairhoods.com as this in an
optional extra and is not supplied
with the hood.

Thank Your For Your Purchase Of The New Jet Ceiling Cooker Hood
WARRANTY REGISTRATION FORM
Luxair products come with a 7 year warranty
For full information on the terms of the product warranty, please click here.
Please only fill this form out once
Please register your warranty at www.luxairhoods.com
THANK YOU