LuxenHome WHHD1798 User manual

Item #:
WHHD1798
Product Name:
Set of 3 Deer Family Lighted Holiday Decoration
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards
of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from the packaging inside the carton to ensure no missing or damaged parts. Do not attempt to
assemble or use the product if any parts are missing or damaged.
CARTON CONTENTS:
Description
Deer (Buck) Parts
Quantity
Deer (Doe) Parts
Quantity
Deer (fawn) Parts
Quantity
Body
1
1
1
Legs
4
0 (attached to body)
0 (attached to body)
Head
1
1
1
Antlers
2
0
0
Ears
2
2
2
Tail
1
1
1
Stakes
4
4
4
Cable Ties
4
3
3
Tubes
2
0
0
R Pins
4
0
0
Power Cord
1 (the set is powered by a single plug)
Transformer
1
Before You Start
1. Decide on an appropriate location for your product. Please read the assembly and Instruction procedure
carefully.
Note: This decoration can be displayed outdoors and indoors.
2. Retain the instructions for future use and save the carton for storing your tree.

Item #:
WHHD1798
Product Name:
Set of 3 Deer Family Lighted Holiday Decoration
Instruction Manual
Please save this manual for future reference.
Assembly and Instruction Procedure (no tools required for assembly):
1. Assemble the doe and fawn. See the image below. Be careful not to pinch any wires. The deer’s (doe) head is
aligned with the hole in the deer’s body. Three holes are at the junction between the deer’s body and the head.
Next, the antlers are inserted into the deer head holes. Insert the tail. For the fawn (small deer), follow the same
steps as the deer (doe) for assembly.

Item #:
WHHD1798
Product Name:
Set of 3 Deer Family Lighted Holiday Decoration
Instruction Manual
Please save this manual for future reference.
2. Next, assemble the standing buck deer taking care not to pinch any wires. See the image below. Insert each of
the four legs of the deer (buck) into the body of the deer. There are four metal positioning tubes. Insert the R
pin hardware in the figure to prevent the legs from detaching from the body. Insert two latch rods into the
deer’s front and hind legs. Attach the deer’s tail. Next, attach the deer head to the body as shown in the image
below (follow the arrow direction). Attach the antlers to the deer’s head.

Item #:
WHHD1798
Product Name:
Set of 3 Deer Family Lighted Holiday Decoration
Instruction Manual
Please save this manual for future reference.
3. When displaying outdoors, use the ground stakes to secure the display to the ground. Connect the wires for the
lights to the plug (twist to tighten the connection).
Plug in the lights and enjoy the lighted decoration!
Warnings:
1. Risk of Fire and Electric Shock – please follow instructions and warnings on lights.
2. Keep wires clear of being pinched or cut during assembly or installation. Discard sets with cut or pinched
insulation.
3. This product is for decoration use only. Not to be used by children as a toy. Keep out of reach of small children.
Troubleshooting:
1. Some bulbs are not lighting or do not come on: Search for any loose plug connections between the presents.
Note: If this action does not resolve the issue, please contact customer service for assistance.