LuXout Shades MOTION MOTORIZATION User manual

MOTION®MOTORIZATION
Rechargeable (Li-ion battery) powered
tube motors with pull control and controller operation
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com

800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 3
MOTION MOTORIZATION
Rechargeable powered tube motors
with pull control and controller
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
Roller
Shades Double Roller
Shades
Consistent
rolling speed
for synchronized
hembar alignment
Voice control
compatibale with
Amazon Alexa
Voice
MOTION MOTORIZATION
Rechargeable powered tube motors
with pull control and controller
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
Roller
Shades Double Roller
Shades
Consistent
rolling speed
for synchronized
hembar alignment
Voice control
compatibale with
Amazon Alexa
Voice
MOTION MOTORIZATION
Rechargeable powered tube motors
with pull control and controller
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
Roller
Shades Double Roller
Shades
Consistent
rolling speed
for synchronized
hembar alignment
Voice control
compatibale with
Amazon Alexa
Voice
MOTION MOTORIZATION
Rechargeable powered tube motors
with pull control and controller
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
Roller
Shades
Double Roller
Shades
Consistent
rolling speed
for synchronized
hembar alignment
Voice control
compatibale with
Amazon Alexa
Voice
Video
How to install,
program and operate
vimeo.com/382371920
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 2

MOTION MOTORIZATION
Conforms to
UL Std. 325
Certified to
CSA Std. C22.2#247
English
WARNING
Read the instructions carefully
before assembling and
using the product. Assembly
can be completed by non-
professionals. For indoor use
only.
Young children can strangle
themselves with the loop
of pull cords, chains and
tapes, and cords that operate
window coverings.
To avoid strangulation and
entanglement, keep cords out
of reach of young children.
Cords may ensnare a child’s
neck.
Move beds, cots and furniture
away from window covering
cords.
Do not tie cords together.
Make sure cords do not twist
together and form a loop.
Cleaning
Follow these general rules when cleaning the
outside of the device and its components:
Use a damp, soft, lint-free cloth. Avoid getting
moisture in openings.
Do not use aerosol sprays, solvents, alcohol,
or abrasives.
Service & Support
Do not perform repairs yourself. Do not attempt
to open the device or disassemble it. You run
the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
Warranty Service
First follow the advice in this manual. If the
product appears to be damaged or does not
function properly, go to your local dealer for
instructions on how to obtain warranty service.
MOTION CM-03/05 LI-ION TUBULAR MOTOR
Conforms to
UL Std. 325
Certified to
CSA Std. C22.2#247
English
WARNING
Read the instructions carefully
before assembling and
using the product. Assembly
can be completed by non-
professionals. For indoor use
only.
Young children can strangle
themselves with the loop
of pull cords, chains and
tapes, and cords that operate
window coverings.
To avoid strangulation and
entanglement, keep cords out
of reach of young children.
Cords may ensnare a child’s
neck.
Move beds, cots and furniture
away from window covering
cords.
Do not tie cords together.
Make sure cords do not twist
together and form a loop.
Cleaning
Follow these general rules when cleaning the
outside of the device and its components:
Use a damp, soft, lint-free cloth. Avoid getting
moisture in openings.
Do not use aerosol sprays, solvents, alcohol,
or abrasives.
Service & Support
Do not perform repairs yourself. Do not attempt
to open the device or disassemble it. You run
the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
Warranty Service
First follow the advice in this manual. If the
product appears to be damaged or does not
function properly, go to your local dealer for
instructions on how to obtain warranty service.
MOTION CM-03/05 LI-ION TUBULAR MOTOR
Conforms to
UL Std. 325
Certified to
CSA Std. C22.2#247
English
WARNING
Read the instructions carefully
before assembling and
using the product. Assembly
can be completed by non-
professionals. For indoor use
only.
Young children can strangle
themselves with the loop
of pull cords, chains and
tapes, and cords that operate
window coverings.
To avoid strangulation and
entanglement, keep cords out
of reach of young children.
Cords may ensnare a child’s
neck.
Move beds, cots and furniture
away from window covering
cords.
Do not tie cords together.
Make sure cords do not twist
together and form a loop.
Cleaning
Follow these general rules when cleaning the
outside of the device and its components:
Use a damp, soft, lint-free cloth. Avoid getting
moisture in openings.
Do not use aerosol sprays, solvents, alcohol,
or abrasives.
Service & Support
Do not perform repairs yourself. Do not attempt
to open the device or disassemble it. You run
the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
Warranty Service
First follow the advice in this manual. If the
product appears to be damaged or does not
function properly, go to your local dealer for
instructions on how to obtain warranty service.
MOTION CM-03/05 LI-ION TUBULAR MOTOR
!
CLEANING
Follow these general rules when cleaning the
outside of the shade and its components.
• Use a damp, soft, lint-free cloth. Avoid getting
moisture in openings.
• Do not use aerosol sprays, solvents, alcohol,
or abrasives.
SERVICE & SUPPORT
Do not perform repairs yourself. Do not attempt
to open the device or disassemble it. You run
the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
WARRANTY SERVICE
First follow the advice in this manual. If the
product appears to be damaged or does not
function properly, call us at 800.817.1204 for
instructions on how to obtain warranty service.
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 3

MOTION MOTORIZATION
shades shades
20
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 4

1 CHANNEL CONTROLLER
Pair
button
Pair
button
Channel
Selection
Channel
indicator
Up
Down
Centre
(stop/favourite)
Centre
(stop/favourite)
Up
Channel
indicator
Down
Right
Left
CM-11
1 Channel Remote
CM-12
5 Channel Remote
MOTION CM-03/05 LI-ION TUBULAR MOTOR
Pair
button
Pair
button
Channel
Selection
Channel
indicator
Up
Down
Centre
(stop/favourite)
Centre
(stop/favourite)
Up
Channel
indicator
Down
Right
Left
CM-11
1 Channel Remote
CM-12
5 Channel Remote
MOTION CM-03/05 LI-ION TUBULAR MOTOR
Pair
button
Pair
button
Channel
Selection
Channel
indicator
Up
Down
Centre
(stop/favourite)
Centre
(stop/favourite)
Up
Channel
indicator
Down
Right
Left
CM-11
1 Channel Remote
CM-12
5 Channel Remote
MOTION CM-03/05 LI-ION TUBULAR MOTOR
5 CHANNEL CONTROLLER
Pair
Button
Channel
Indicator
Next
Channel
Previous
Channel
Center
(Stop/Favorite)
Up
Down
Right
Left
15 CHANNEL CONTROLLER
Center
(Stop/Favorite)
MOTION MOTORIZATION
Channel
Indicator
Up
Down
Pair
Button
Pair
Button
Channel
Indicator
Channel
Selection
Center
(Stop/Favorite)
Up
Down
Right
Left
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 5

MOTION MOTORIZATION
SEE MANUAL
MOTION BRIDGE
i
1 CHANNEL PULL CONTROLLER
Pair
Button
1 CHANNEL WALL CONTROLLER
Center
(Stop/Favorite)
Pair
Button
Up
Down
Right
Left
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 6

MOTION MOTORIZATION
Activate the motor by charging it with a micro
USB cable. A green LED will start ashing.
The motor can be used during charging.
To activate the motor without a micro USB
cable, see step 25. Our Motion Shades are
charged prior to shipping.
1
2
3
4
5
!
Install the shade brackets
Jamb Mount
Activate the motor
Install the operator end to bracket and bracket cover
Install the shade idle end rst
Install the idle end and idle end bracket cover
Wall Mount
Bracket Covers
Ceiling Mount
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 7

MOTION MOTORIZATION
7
6
!
Up
Channel
indicator
Channel
selection Pair
button
Down
Pair a controller
Check rotational direction
iEnd limits must be programmed to use a shade properly and to prevent it from being damaged.
Proceed to step 12 if end limits are already set.
i
i
6.1
6.2
6.3
7.1
7.2
Pair a controller control that is able to program shades. See pages 4 and 5 for
controller control details. In this manual, 5 Channel Controller is displayed.
Shortly press the program button on
the motor. The shade will start stepping,
indicating that program mode has been
activated.
(The shade keeps stepping until the
program mode is deactivated.)
Select a desired channel for the shade
using the channel selection button on the
controller.
Repeat steps 6.1 - 6.3 to remove a shade
from a channel.
Shortly press the down button to
check if the shade unrolls the right
way. If the shade moves up, the
rotational direction must be changed.
Simultaneously press the up and
down button to change the rotational
direction.
Press the pair button on the back of
the controller to pair the shade with
the selected channel. The shade will
shortly stop stepping, indicating that the
controller has been paired to the shade.
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 8

8Set or adjust bottom limit position. If adjusting limits
only, press the programming button on the
motor.
Motor will start stepping and is now
in limit adjusting mode.
8.1
Down
Press and hold the down button until the shade
reaches the desired bottom position.
WARNING: risk of damage.
Slowly approach the bottom position.
9.1 Simultaneously hold the center and the up
button until the shade stops stepping and
starts stepping again.
The bottom position has been saved.
Center
Up
9
MOTION MOTORIZATION
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 9

10 Set top position
10.1
Up
Press and hold the up button until the shade
reaches the desired top position.
WARNING: risk of damage.
Slowly approach the top position.
11.1
Center
Down
Simultaneously hold the center and the down
button until the shade stops stepping and
starts stepping again.
The top position has been saved.
11
MOTION MOTORIZATION
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 10

12 Set favorite position (optional)
Center 12 .1
12.2
Move the shade to a desired favorite position.
Hold the center button to save this Favorite
position. The shade shortly stops stepping
indicating the favorite position has been saved.
13 Deactivate program mode
13.1 Shortly press the program button to deactivate
program mode. The shade stops stepping and
can be operated.
MOTION MOTORIZATION
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 11

Up
Down
Center
Channel
Selection
Pull control: pull once to move the shade to the
end positions. Pull again to stop the shade.
Controller operation: Choose the channel
with which the shade has been paired using the
channel button. Press the up or down button
to operate the shade. Press the center button
to stop the shade.
14 Operate the shade
i
i
15 Move to favorite position
Pull control: Pull and hold to move the shade to
the favorite position.
i
Center
Controller operation: press and hold the
center button to move the shade to the favorite
position.
i
MOTION MOTORIZATION
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 12

When pressing the up or down button on the controller, the shade
directly moves to its end positions (direct control). To operate the shade
with smaller steps using the up and down button, direct control can be
deactivated. Now, the shade only directly moves to its end positions
when the up or down button is held longer than two seconds.
i
16 Reset favorite position
Center
16 .1
16. 2
16.3
16.4
Move the shade to a desired favorite position.
Press the program button on the motor to activate
program mode. The shade starts stepping.
Hold the center button to save this favorite position.
The shade shortly stops stepping, indicating the
favorite position has been saved successfully.
Press the program button on the motor to deactivate
program mode. The shade stops stepping.
17 Deactivate direct control
17.1
17. 2
Press the program button on the motor to activate
program mode. The shade starts stepping.
Hold the program button until the shade stops
stepping (approximately 5 seconds) to deactivate or
reactivate direct control.
MOTION MOTORIZATION
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 13

MOTION MOTORIZATION
It is possible to only delete end limits or to do a factory reset.
Factory reset will delete the end limits and remove the connection to any paired controller.
i
18 Reset the shade
18 .1 Press the program button on the motor to activate program mode.
Delete end limits: to delete the end limits of the shade, hold the program button until the
shade stops stepping for the rst time, and keep holding button until the shade stops stepping
for the second time (approximately 10 seconds).
Factory reset: to reset the shade to factory defaults, hold the button for at least 20 seconds.
The shade will stop stepping twice. After the second stop, the shade will give one extra step to
conrm factory reset.
i
i
19 Recharge the battery
LED light ashes
red during operation;
Charge the battery
LED light ashes
green;
Battery is charging
LED light constantly
green;
Battery is fully charged
Use a micro USB cable
to charge the motor
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 14

MOTION MOTORIZATION
20 Manual control
Advanced Options
i
iIn case there is no controller or pull control, the shade can be
operated with the program button on the motor.
20 .1
20.2
Hold the program button to manually operate the shade. The shade will move as long as the
button is being pressed. (max. 15 sec.)
Single select makes it possible to activate program mode on a single shade through a
controller, without having to physically press the program button on the shade.
To activate Single select,
simultaneously hold the
center button and press
the pair button.
The controller starts
searching for shades
(search mode). This is
indicated by the LEDs
ashing from left to
right.
To move the shade in opposite direction, release the program button and repeat step 20.1.
21 Single Select (5 Channel Controller)
i
21.1 21.2
Once a shade is found,
the channel LED will ash
and the shade starts
stepping, indicating that
program mode has been
activated. The shade
can now be (un)paired
to the controller and/or
programmed.
To search for
the next shade,
press the right
button. Search
mode will be
activated. To
nd the previous
shade, press the
left button.
To exit Single
select, press
the right
button during
search mode.
21.3 21.3 21.3
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 15

MOTION MOTORIZATION
22 Single Select (15 Channel Controller)
iSingle select makes it possible to activate program mode on a
single shade through a controller, without having to physically
press the program button on the shade.
To activate Single select,
simultaneously hold the
center button and press the
pair button.
Once a shade is found,
the channel number will
ash and the shade starts
stepping indicating that
program mode has been
activated. The shade
can now be (un)paired
to the controller and/or
programmed.
To search for the
next shade, press
the right button.
Search mode will
be activated. To
nd the previous
shade, press the
left button.
To exit Single
select, press the
right button
during search
mode. The display
shows the
letter O.
The controller starts
searching for shades (search
model). This is indicated by
the horizontal bars on the
controller.
22.1
22.3 22.4 22.5
22.2
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 16

MOTION MOTORIZATION
23 Channel Select (5 Channel Controller)
iChannel select makes it possible to copy shades in between channels/controllers without having to physically
press the program button on the motors.
Select the channel
from which the shades
must be copied.
All shades in the selected
channel will start stepping,
indicating program mode has
been activated. All shades can
be copied to a new channel
on the same controller or a
different controller. Select
a new channel on the
(new) controller.
Press program button
on the new controller
to pair the shades with
the new controller.
To exit channel select,
go back to the channel
selected at step 23.1
and repeat step 23.2.
To activate channel
select, simultaneously
hold the channel
selection button and
press the pair button.
23.1
23.3 23.4 23.5
23.2
24 Channel Select (15 Channel Controller)
iChannel select makes it possible to copy shades in between channels/controllers without having to physically
press the program button on the motors.
Select the channel you
would like to copy.
All shades in the selected
channel will start stepping,
indicating program mode has
been activated. All shades can
be copied to a new channel
on the same controller or to
different controllers. Select a
channel on a (new) controller.
Press program on the
(new) controller to pair
the shades with the
(new) controller.
To exit channel select,
choose the channel you
selected at step 24.1 and
repeat step 24.2.
To activate channel
select, simultaneously
hold the channel
selection button and
press the pair button.
24.1
24.3 24.4 24.4
24.2
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 17

Motor is in transport mode. Activate the motor. See step 25.
Charge the motor. See step 19.
Replace the battery in the controller.
See the manual of the controller.
Replace the battery in the controller.
See the manual of the controller.
Make sure that the antenna of the motor
is out of the way of metal objects.
Move closer to the motor.
Pair the controller with the motor.
See step 6.
Try a different charger or make sure the
charger is plugged in the outlet.
Pair the shade with a free channel to
program or use single select to program
the shade.
1) Program end limits. See step 8 - 11.
2) Activate direct control. See step 17.
Charge the motor. See step 19.
Motor battery is empty.
Controller battery is empty. (LEDS
of controller are ashing rapidly.)
Controller battery is
inserted incorrectly.
The distance from the controller to
the motor is too far.
The controller is not connected to
the shade.
Motor LED ashes red.
Shade does not work.
Shade is not charging.
Multiple shades respond
to a controller. (Unable to
program a single shade)
Shade moves in
small steps.
Favorite position can not
be programmed.
Shade lowers too far.
Shade moves in the
opposite direction.
Shade moves in the
opposite direction.
Charger is not plugged in or does
not work.
Multiple shades are paired with a
single channel.
1) No end limits are programmed.
2) Direct control is deactivated.
No end limits are programmed. Program end limits. See step 8 - 11.
Reprogram end limits. See step 8 - 11.
Change the rotational direction.
See step 7.
Press the program button on the motor
to exit program mode.
End limits are programmed incorrectly.
The rotational direction has been
set incorrectly.
The shade is in program mode.
Radio-frequency interference
The battery of the motor is empty.
MOTION MOTORIZATION
Activate/Deactivate the motor
25
iTo prevent the shade from getting damaged, the motor has a transport mode that makes sure the shade
will not be activated before installation.
Hold the program button and pull twice to activate or deactivate the motor. The motor can also be
activated by charging it with a micro USB cable.
25.1
Frequently Asked Questions
MOTION® is a registered trademark of Coulisse B.R.
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com 18