LY International Electronics HS-6818 User manual

Multi-room Music System HS-6818
Welcome to use the Multi-room Music system. For better use of this equipment, please read this
manual thoroughly before use.
http://www.lyintlcorp.com
User
’
s
Manual
IR Remote Controller HS-21
Home Central Audio System HS-6818
HS-3402 HS-3402
Sound Box Series
Sound Box Series
Room Controller
HS-80R

Contents
※ General Description................................................................................................................................ 1
1．About the Multi-room Music System............................................................................................ 1
2．Functional Characteristics of System Host................................................................................. 1
※ Appearance and Functions of Host Device ........................................................................................ 2
1．Functions of Front Panel ............................................................................................................... 2
2．Functions of Back Panel................................................................................................................ 4
※ Connection Instructions ......................................................................................................................... 6
1．Schematics of Input Connection .................................................................................................. 6
2．Connection Schematics for Tuner Module.................................................................................. 6
3. Connection Schematics for Infrared Learning Transmitter and Central Controller ................ 8
4．Connection Schematics for Zone 1 Output ................................................................................ 8
5．Connection Schematics for Other Zone Output....................................................................... 10
※ Operating Instructions for Host........................................................................................................... 11
1．Power On State............................................................................................................................. 11
2．Operating Instructions for Manual Control of Zone 2-12 ........................................................ 11
3．Operating Instructions for Manual Control of Zone 1.............................................................. 12
4．Instructions for Manual Operation of MP3 Player.................................................................... 15
4.1 Mode Selection................................................................................................................ 15
4.2 Time Display .................................................................................................................... 15
4.3 Music Selection ............................................................................................................... 15
5．Instructions for Manual Operation of Tuner.............................................................................. 15
5.1 Band Selection................................................................................................................. 16
5.2 Search Radio ................................................................................................................... 16
5.3 Store Radio....................................................................................................................... 16
5.4 Mute Mode ....................................................................................................................... 16
5.5 Load Radio Frequency ................................................................................................... 16
6．Timer Programming...................................................................................................................... 17
6.1 Timer Setting.................................................................................................................... 17
6.2 Time Calibration............................................................................................................... 20
6.3 Infrared Learning ............................................................................................................. 20
6.4 Copy Timer Point............................................................................................................. 21
6.5 System Setting................................................................................................................. 21
※ Functions of Infrared Remote Controller........................................................................................... 22
※ Fabrication of Wired Remote Controller Wires................................................................................. 23
※ About the Format of USB Disk File.................................................................................................... 24
※ Packing List ........................................................................................................................................... 27
※ Performance Specifications................................................................................................................. 28
1．MP3 Player.................................................................................................................................... 28
2．AM/FM Tuner ................................................................................................................................ 28
3．Timer............................................................................................................................................... 28
4．General Index................................................................................................................................ 29

Multi-room Music System
1
※ General Description
1．About the Multi-room Music System
The HS-6818 is a set of modern Multi-room Music system to your desire.
Except all the functions of the traditional family audio systems, this system is also provided with: 1)
Timer function, that is, preset the specific time and the task to be executed at that time. 2) The
function that different rooms can hear different music at the same time. This system has
another important function. That is, you can control the working status of the host from the room.
For example, from the remote controller installed in the room, you may select the program played
by the host, or control the volume and tone for your room.
The control host of this system has integrated the functions of MP3 player, radio, zone divider,
timer and pre / post amplifier. It is provided with DVD, PC, TV and AUX input ports for peripheral
audio equipment, and line audio signal output port for zone 1 and 2. There are 12 zones, among
which the 1st zone is of 5.1 channel and the others are of dual channel. The 5.1 channel is
available with two input modes, i.e. line input and fiber optical input. There are 12 remote control
data interfaces connected to the wired remote controllers for 12 zones, so that the host and remote
controller set up an interactive dual-way control, providing high convenience for the users.
2．Functional Characteristics of System Host
 Modern Multi-room Music system with plentiful functions.
 There are 12 zones, among which the 1st zone is of 5.1 channel (Front Left, Front Right,
Rear Left, Rear Right, Center and SW ) and the others are of dual channel.
 The 1st zone has 5.1 channel (Front Left, Front Right, Rear Left, Rear Right and Center; SW
without PA but output from the line), with each channel having 60W output power. The 2nd
and 3rd zones have 2 x 60W output power, and the 4th ~ 12th zones have 2x20W output
power.
 The 1st zone is provided with 5.1 channel line input and fiber optical input function, as well as
Dolby and DTS decoding functions. DSP surround processing function is provided, and
different sound field effects are available for selection.
 AM/FM radio function is provided. This function is realized in form of modular design, and
can be separated from the host for installation at a position with better receiving effect. The
module is connected to the host via T568A network cable.
 MP3 play function and USB port are provided. Support the music files of MP3 format stored
in USB disc, MP3 player, mobile HDD, card reader and other storage devices.
 Provided with DVD audio input port, PC audio input port, TV audio input port and one
auxiliary audio input port. Also provided with line audio signal output port for zone 1 & 2,
DVD/TV video input port and 12-zone video output port.
 Timer control function provided. The user may edit 100 timing points. With one week as a
cycle, it is possible to execute timer control over the ON/OFF switching, audio source,
volume, clock, AM/FM radio, MP3 play and output power ON/OFF for 12 zones.
 One AC220V power socket provided, with its switching state interlinked to the switch of zone.

Multi-room Music System
2
You may switch on any of the zones to switch on this power output. This power output is
switched off when all the zones are switched off. Timer control over its switching state is
provided.
 Infrared learning function provided, so that it can learn the remote controller of any brand.
 RS232 remote control port provided, so that the user may control the functions of this device
via central control equipment.
 Inductive touch keys are designed for the panel, with two control modes available, i.e. local
control and remote control.
 Video switching function provided. The video is switched in synchronization with the audio
input.
※ Appearance and Functions of Host Device
1．Functions of Front Panel
1) Power Switch (POWER)
Press this key to switch on the power
and release it to switch off the power.
2) Power Indicator (POWER)
This indicator is bright when the power
is switched on. And it is dark when the
power is switched off. This indicator is
red under standby state and turns green
under working state.
3) Zone ON/OFF Key
① Execute ON/OFF control to the
zone directly from main interface.
② Return to main interface from any of
Level I menu.
4) Key for Moving Cursor / Quick
Search of Radio Station
This is a multifunctional key:
① It is generally used to move the
cursor forward or load the options
for selection. In some operations, it
is equivalent to a digital wheel
rotating counterclockwise.
② Under radio working state, it can be
used to search the radio station
from high frequency to low
frequency and will be stopped

Multi-room Music System
3
automatically when searching a
station.
5) Key for Moving Cursor / Quick
Search of Radio Station
This is a multifunctional key:
① It is generally used to move the
cursor backward or load the options
for selection. In some operations, it
is equivalent to a digital wheel
rotating clockwise.
② Under radio working state, it can be
used to search the radio station
from low frequency to high
frequency and will be stopped
automatically when searching a
station.
6) Enter / Confirm Key (SELECT)
Enter the setting interface or confirm the
operating result. In some operations, it
is equivalent to a digital wheel.
7) LCD Screen
Display the functions and state of the
equipment.
8) Operation Option Control Key
(TIMER)
Enter the operation option interface.
This interface includes such operation
options as the timer setting, time
calibration, infrared learning, timer copy
and system setting. The interface is as
shown below:
9) Key for Controlling MP3 (MP3)
Enter MP3 setting interface.
10) Key for Controlling Tuner (TUNER)
Enter tuner setting interface.
11) Key for Displaying Zone State
(ZONE)
Press this key to enter the main
interface that displays the state of 12
zones. It can also used to enter the
standby interface (time interface) from
main interface. The main interface is
below:
12) Multifunctional Digital Wheel
① Used to search the radio frequency
under tuner mode.
② Used to search the program under
MP3 mode, and select and confirm
the play mode.
③ Used to direct the options, select
the desired options and confirm the
result of current operation under
timer mode.
④ Used to direct the options under
zone control mode and enter the
zone control interface; also used to
perform operations and confirm the
result of current operation.
13) Infrared Window (IR)
14) USB Port (USB)
Used for inserting USB disk, mobile
HDD or card reader.
15) Key for Switching Tuner AM/FM Band
(BAND)
16) Key for Radio Storage (MEMO)
17) MONO/
This is a multifunctional key:
① Under tuner state, it serves as a key
for switching between mono /
stereo.
② Play / stop key under MP3 state.
18) Key
This is a multifunctional key:
① Mute key under tuner state.
② Play / Pause key under MP3 state.
19) Key
This is a multifunctional key:
① A key for searching the radio station
forward under tuner state.
Operation Options
TIMER SET IR SETUP ADJ TIME
COPY TIMER EXIT SYSTEM SET
DVD
TUNER
PC TV MP3
PC
1
2
3
4
5
6

Multi-room Music System
4
② A key for searching the desired
program forward under MP3 state.
20) Key
This is a multifunctional key:
① A key for searching the radio station
backward under tuner state.
② A key for searching the desired
program backward under MP3
state.
Forced Switching of Key Functions
The function keys on the host panel can be forcibly switched of their functions under Level I menu
(interface). For example, you may touch MP3 key on the panel under tuner state interface, so that
the screen will change from display of tuner state to MP3 state, in which case you can operate
MP3 state. You may touch TIMER to enter operation option interface, touch ZONE or zone
ON/OFF key to enter the zone state display (main interface of equipment system). The interface
that can be directly switched is as shown below:
2．Functions of Back Panel
1) Optical Input Port for 5.1 Channel
(OPTICAL INPUT)
For connection and description, please
refer to the Connection Instructions (on
LOOP
MP3 PLAYER
03
\
0 1
Override category. Please wait…
PLAY ALL
03
：
57
04
：
15
BAND FM
100.45MHz
SIGN
STEREO
AM/FM PLAYER
CH 40
红外学习
调校时间
复制定时
退
出
系统设置
DVD
TUNER
PC TV MP3
PC
1
2
3
4
5
6
OPTION
TIMER SET
IR SETUP ADJ TIME
COPY TIMER
EXIT SYSTEM SET

Multi-room Music System
2
page 5).
2) Tuner Mode (Page 5)
The tuner function is realized in form of
modular design, and can be separated
from the host for installation at a
position with better receiving effect. The
module is connected to the host via
T568A network cable.
3) Tuner Module Port (TUNER INPUT)
For connecting the tuner module signal.
4) DVD/TV Video Input Port (VIDEO
INPUT DVD) Page 5
5) Wired Remote Controller Port for Zone
1 ~ 12
(REMOTE INPUT) Page 8 and 9
6) Zone 1 PA Output Port (ZONE1
SPEAKER OUTPUT) (Page 7)
7) Zone 2/Zone 3 PA Output Port (Page 9)
(ZONE2/ZONE3 SPEAKER OUTPUT)
8) AC220V Timer Power Output Socket
(TIMER)
The switching state of timer power
output socket is interlinked to the switch
of zone. You may switch on any of the
zones to switch on this power output.
This power output is switched off when
all the zones are switched off. Timer
control over its switching state is
provided. (Page 15)
9) RS232 Port (RS232)
RS232 remote control port is provided,
so that the user may control the
functions of this device via central
control equipment.
10) Remote Control Output Port (REMOTE
OUT) Page 7
Connected to infrared receiver for
infrared learning of the function controls
over external DVD and TV.
11) 5.1 Channel Input Port for Zone 1 (5.1
INPUT)
For connection and description, please
refer to the Connection Instructions (on
page 5).
12) DVD/PC/TV/AUX Audio Input Port
13) Line Signal Output Port for Zone 1 /
Zone 2
14) 5.1 Channel Sub Woofer Output for
Zone 1
(SUB WOOFER) (Page 7)
This signal has no PA and it is output
via line directly.
15) Zone 1 ~ 12 Video Output Port (Page 8)
For transmitting the DVD/TV video
signals to 12 zones, with its distribution
changing synchronously with the audio
signal.
16) Zone 4 ~ 12 PA Output Port (Page 9)
17) AC220V Working Power Input

Multi-room Music System
6
※ Connection Instructions
1．Schematics of Input Connection
Notes :
 The 5.1 channel input and optical input on DVD player provide audio
signal to zone 1 only. When connecting the optical port, please
remove the dustproof cap as directed. Please keep the dustproof
cap properly. To keep the optical port clean, please cover up the
dustproof cap when this port is long put out of use.
 The video signals input from DVD and TV are transmitted to 12 zones
respectively via 12 video output ports on this device.
 Except optical input, the other inputs above are connected by using
lotus connector.
2．Connection Schematics for Tuner Module
The tuner function is realized in form of modular design, and can be separated from the host for
installation at a position with better receiving effect. Installation of the tuner module on a better
place can improve the receiving effect. The tuner module is connected to the host via T586A
network cable. Even the module is installed on the host, it can also be connected to the back panel
on this device.
Notes: To separate the tuner module from this device, the extension wire, if needed, shall
be fabricated as follows:
Optical Port
Lotus Connector
DVD Video Signal
Optical
Stereo Signal
TV Video Signal
DVD Player PC Other Audio Sources
TV
RS232 IN
5.1 Channel
Signal

Multi-room Music System
7
The tuner connection is as shown below:
Connection of tuner module to this device:
Connection of tuner module for not installation on this device:
RJ45 Port
The colors from left to right are:
Green white, green, orange white,
blue, Blue white, orange, brown
white and brown. The two ends
match each other.
Pin 1
将夹线盖
按下
将连接线
插入线孔
将夹线盖
松开
TUNER OUT
TUNER INPUT
Spring clamp
against you
FM antenna
AM antenna
Loosen the
clamp cover
Insert the
con
nection wire
into the wire hole
Press down
clamp cover
FM antenna
AM antenna

Multi-room Music System
8
3. Connection Schematics for Infrared Learning
Transmitter and Central Controller
4．Connection Schematics for Zone 1 Output
Connection Schematics for 5.1 Channel Output
Host Device
+
-
+
-
+
-
+
-
+
-
Left Right
Front
Left Right
Surround
Center
Sub Woofer
DVD player
TV
红外遥控输出的 REMOTE OUT1 接口连接的发射器对
应外接的 DVD 播放器，REMOTE OUT2 接口连接的发
射器对应外接的电视机。
Central Control Device
The transmitter connected to REMOTE OUT1 port on the infrared
remote controller corresponds to external DVD player
; the
transmitted connected to REMOTE OUT2 corresponds to TV.

Multi-room Music System
9
Placement Schematics for 5.1 Sound Box
① Center
②Front Left
③ Front Right
④ Rear Left Surround
⑤ Rear Right Surround
⑥ Sub Woofer
Integrated Connection Schematics for Zone 1 Output
① Center
② Front Left
③ Front Right
④ Rear Left Surround
⑤ Rear Right Surround
⑥ Sub Woofer
TV
Line audio signal
5.1 Channel
5.1 Channel
Wired Remote Controller
Infrared remote controller
The PA output power of
each channel ①-⑤ is 60W
Line signal output from ⑥
channel

Multi-room Music System
10
5．Connection Schematics for Other Zone Output
Connection schematics for Zone 2 and Zone 3 output: The zone 2 and zone 3 are of stereo
dual-channel output, with each channel at 60W. The zone 2 has two groups of ports, and the
signals are output in parallel. You may connect one of them, or connect two sound boxes at the
same time. Take care that the total resistance shall not be lower than 4Ω.
Integrated connection schematics for other zones: The zone 4 ~ zone 12 of this device are of
stereo dual-channel output, with each channel at 20W.
Zone 2
can be
connecte
d like this
Zone 2
can also
be
connected
like this
Zone 2 Sound Box Zone 3 Sound Box Zone 2 Sound Box
Zone 3 Sound Box
One zone corresponds to one video output
Zone 4 Sound Box
Zone 2 Line Output
HiFi PA
Zone 12
Zone 1 TV Zone 12 TV
Zone 1
Zone 12 Sound Box

Multi-room Music System
11
※ Operating Instructions for Host
1.Power On State
Connect all the wires correctly and check for no error. Then, connect the power supply. Press
down Power On/Off key to switch on the device. If there is no zone opened, the system will be
under standby state and display the standby interface on the screen (Fig. 1-1). The power indicator
is red. In this case, the timer power output is off. Under standby state, you may press ON/OFF key
or ZONE key to enter the main interface (Fig. 1-2). After a zone is opened, the current state of
switching, audio source and volume in this zone will be immediately displayed. In this case, the
power indicator will be green, while the timer power output will be opened. (Note: If all the zones
are closed, the timer power output will also be closed. If one of the zones is opened, the timer
power output will be automatically opened).
2．Operating Instructions for Manual Control of Zone 2-12
The control of zone 2 ~ 12 includes the selection of audio source, adjustment of volume and tone,
and testing of clock sound for each zone. The operating procedures are as follows:
 Enter Zone Operation Interface Under the main interface, rotate the digital wheel * to
select a zone (Fig. 2-1) and press digital wheel once # to enter the zone operation interface
(Fig. 2-2). Under this interface, you may carry out the above operations to the opened
zones.
 Select Audio Source There are two ways for selecting the audio source:
①From zone operation interface, rotate the digital wheel * to move the cursor to pane behind
the “Program” (Note: The cursor herein refers to the dark grey icon when an option is
selected). Press the digital wheel # once, so that the icon will appear behind the pane.
Rotate the digital wheel * to display the 6 types of audio source in turn. When the desired
audio source is on display, stop rotating the digital wheel and press the digital wheel #
again, so that the selected audio source will be allocated to this zone.
② Select the audio source from remote controller. You may select by directly pressing the
source name key or SOURCE+/SOURCE- key on the remote controller.
2010 / 03 / 05 POWER OFF
MON. 8:35:16
NEXT TIMER POINT∶TUES.07:55:00
(Fig. 1-1)
(Fig. 1-2)
ON/OFF key
DVD
TUNER
PC
TV MP3
PC
1
2
3
4
5
6
Notes
In the operations marked * below, the functions for rotating the digital wheel can also be done by using
the key . In the operations marked #, the functions for pressing the digital wheel can also
be done by using the key .

Multi-room Music System
12
 Volume / Tone Control There are two ways for controlling the volume and tone:
① From zone control interface, you may rotate the digital wheel * to move the cursor to the
sliding pane behind the "Volume" option. Press the digital wheel # once, so that the icon
will appear behind the pane. Then, rotate the digital wheel * clockwise or counterclockwise
to move the slider left and right, so that the zone volume will be increased or decreased
accordingly. Adjust the treble or bass tone in the same way.
②Use the wired remote controller or infrared remote controller to control the zone volume /
tone under the interface except “Operation Option”. For control of the zone volume / tone
from wired remote controller, please refer to the Operating Instructions for HS-80R (Wired
Remote Controller).
 Ringer Testing Rotate the digital wheel * to move the cursor to “Ringer Testing” option and
press the digital wheel # once, so that a set of ringers will be output from the output port.
(Note: The remote controller does not provide the “Ringer Testing” function)
 After completion of the above operations, rotate the digital wheel * to move the cursor to
“CONFIRM” checkbox. Then, press the digital wheel # once to confirm and exit. The other
zones from zone 2 to 12 may be controlled according to the method above.
3．Operating Instructions for Manual Control of Zone 1
Zone 1 is different from other zones. Except the 6 audio sources in other zones, the zone 1 also
has 5.1 channel and optical input source, totaled 8 types of audio sources for selection. Meanwhile,
it differs from other zones in view of zone output mode ad tone / volume control. The detailed
operations are as follows:
Under the main interface, rotate the digital wheel * to move the cursor to zone 1 state pane (Fig.
3-1). Then, press the digital wheel # once to enter the zone 1 control (hall control) interface (Fig.
3-2).
1) Select Audio Source The selection of audio source for zone 1 is same as that for other
zones. The only difference is that the zone 1 has two more options, i.e. 5.1 channel (5.1LINE)
and optical (OPTICAL) source. Except that the 5.1 channel (5.1LINE) and optical (OPTICAL)
can be manually selected from the host panel, they can also be selected by pressing the
SOURCE+/SOURCE- on infrared remote controller.
2) Total Volume / Tone Rotate the digital wheel * to move the cursor to “Total Volume/Tone”
(Fig. 2-1)
(Fig. 2-2)
ZONE 02 CONTROL
DVD
SOUR.
VOL.
BASS
TREB.
OK
CHIME TE.
(Fig. 3-1) (Fig. 3-2）
HALL CONTROL
DVD
SOUR.
VOL.& TONE
SPK. SETUP SEPA. VOL.
MODE SETUP OK
Press digital wheel
Or press
Press digital wheel
Or press
DVD
TUNER
PC
TV MP3
PC
1
2
3
4
5
6
DVD
TUNER
PC
TV MP3
PC
1
2
3
4
5
6

Multi-room Music System
13
option and press the digital wheel # once to enter “Hall Total Volume / Tone Control" interface
(Fig. 3-3), where you can control the total volume and tone of zone 1 (hall) and carry out ringer
testing. For control of the volume and tone, please refer to the Operating Methods for Control
of Zone 2~12 Volume and Tone. It will not be repeated here.
3）Speaker Setting Rotate the digital wheel * to move the cursor to “Speaker Setting” option and
press the digital wheel # once to enter the “Hall Speaker Setting” interface (Fig. 3-4) (Next
page). Among the setting options:
 Testing: Used for testing if the speakers work normally. The “Normal” option refers to the
current program being played. Then, exit the test state.
 Front: It is provided with two options, i.e. Big and Small, used for setting big sound box or
small sound box.
 Center: It is provided with three options, i.e. Big, Small and None. Except for setting the big
sound box or small sound box, it is also used for setting the center signal YES or No under
AUTO and Dolby Pro mode. If setting to “No”, the center signal is distributed to the two
loudspeakers on left and right.
 Surround: It is provided with three options, i.e. Big, Small and None. Except for setting the big
sound box or small sound box, it is also used for setting the surround signal YES or No under
AUTO and Dolby Pro mode. If setting to “No”, the surround signal is canceled.
 Sub Woofer: It is provided for setting sub woofer signal YES or No under AUTO and Dolby Pro
mode. If setting to “No”, the sub woofer signal is distributed to the two loudspeakers on left
and right.
 The above settings can be done by using the digital wheel, or by using the key
and . After setting, press “Confirm” to confirm and exit the setting interface.
4）Independent Volume Rotate the digital wheel * to move the cursor to “Independent Volume"
option and press the digital wheel # once to enter the “Hall Independent Volume Control”
interface (Fig. 3-5).
HALL CONTROL
DVD
SOUR.
VOL. & TONE
SPK. SETUP SEPA. VOL.
MODE SETUP OK
(Fig. 3-2) (Fig. 3-3)
HALL VOL. AND TONE CONTROL
CHIME TE.
VOL.
TREB.
BASS
OK
HALL CONTROL
DVD
SOUR.
VOL. & TONE
SPK. SETUP
SEPA. VOL.
MODE SETUP
OK
(Fig. 3-2) (Fig. 3-4)
HALL CONTROL
DVD
SOUR.
VOL. & TONE
SPK. SETUP
SEPA. VOL.
MODE SETUP
OK
(Fig. 3-2) (Fig. 3-5)
HALL SEPARATE VOLUME CONTROL
FRON.
CENT.
SURR.
WOOF.
OK
Press digital wheel
Or press
Press digital wheel
Or press
Press digital wheel
Or press
HALL SPEAKER SETUP
NORMAL
TEST
LARGE
FRON.
LARGE
CENT.
LARGE
SURR.
OK
HAVE
WOOF.

Multi-room Music System
14
The hall independent volume control refers to independent control over the volume of several
channels, e.g. front and surround. The operation is same as that for zone volume control. It may
be done by using digital wheel or by using the keys and .
5） Mode Setting Rotate the digital wheel * to move the cursor to “Mode Setting” option and
press the digital wheel # once to enter the “Mode Setting” interface (Fig. 3-6).
 Listening Mode: Three options are provided, namely: AUTO, Dolby Pro Logic and STEREO.
Rotate the digital wheel to move the cursor to the pane behind "Listening Mode”, and press
the digital wheel. When the icon appears in pane, rotate the digital wheel to adjust the
option. Select the desired option and press the digital wheel again to confirm. The effect
under three modes is respectively:
① STEREO: Forcibly there is output from the speakers on front left and front right only, but no
signal output from other channels. It is effective for all program types.
② AUTO：Auto mode. If the input is Dolby digital AC-3, the listening mode will be AC-3
DIGITAL. If the input is DTS, the listening mode will be DTS DIGITAL.
③ Dolby Pro Logia: Dolby Pro Logic processing mode, which can process the stereo
(dual-channel) movie and music of any quality into surround output with 5 full-range
channels.
 DSP Effect: Operate as above by using the digital wheel. Its function is to simulate the effect
of different fields from internal DSP, including: HALL, CHURCH, DISCO, THEATER, LIVE,
MOVIE, MUSIC and SIMULATE.
① HALL： Simulate the hall effect.
② CHURCH： Simulate the church effect.
③ DISCO： Simulate the disco hall effect.
④ THEATER： Simulate the theater effect.
⑤ LIVE： Simulate the live effect.
⑥ MOVIE： Simulate the cinema effect.
⑦ MUSIC： Simulate the music hall effect.
 After setting, select “Confirm" and press the digital wheel to confirm the setting and exit the
setting interface.
Notes:
The 5.1 channel input and output have corresponding through mode. Therefore, when you
have selected the program of 5.1 channel source in zone 1,
The “Speaker Setting” option will be disabled; ①
The “Mode Setting” option will be disabled.②
HALL CONTROL
DVD
SOUR.
VOL. & TONE
SPK. SETUP
SEPA. VOL.
MODE SETUP
OK
(Fig. 3-2) (Fig. 3-6)
HALL SOUND FIELD MODE
LISTEN MODE
LIVE
DSP EFFECT
OK
AUTO
Press digital wheel
Or press

Multi-room Music System
15
4．Instructions for Manual Operation of MP3 Player
Press “MP3” key on the panel to enter the MP3 player setting interface (Fig. 4-1) (Next page).
4.1 Mode Selection
This operation is used for selecting the play mode of MP3. Three modes are available for selection,
i.e. “Play All”, “Play One” and “Repeat One”. The "Play All” mode refers to sequential play of all the
music files stored in the memory. The “Play One" mode refers to play of the currently selected
music only. The “Repeat One” mode refers to repeated pay of the currently selected music.
How to Set: Rotate the digital wheel to the pane behind the “Mode” option and press the digital
wheel until the icon appear behind the pane. Rotate the digital wheel to select. After selection,
press the digital wheel again to confirm and exit.
4.2 Time Display
As shown in Fig. 4-1 (next page), the time “00:00” in front indicates the time progress of the music
being played, and the time “00:00” behind indicates the total time length of the music being played.
4.3 Music Selection
As shown in Fig. 4-1, move the cursor to the pane “ \ “. Press and rotate the digital wheel
to select. The number in the front pane represents the directory. Selecting 03 indicates that you
have selected the third director in USB disk. The number in the rear pane represents the serial
number of the music in this directory. The name of the selected music is displayed behind the pane.
When selecting the music, please watch the notes on the lower of the screen. If the screen
displays “No USB disk. Please insert USB Disk", this indicates that there is no USB disk inserted
into USB port, or you have inserted an USB disk that cannot be recognized by the equipment. If
you have inserted an USB disk and the equipment has accessed it, the note “USB disk inserted.
Please wait…” will appear on the lower of the screen. If there is no music under a directory in USB
disk, the note “No music found under this directory. Please select another directory" will appear if
this directory is selected. After that, the equipment automatically turn to another directory and
display the names of the music on that directory.
For manual control of MP3 player, you may use the “ “ and “ “ key on the equipment panel
to select the music, and use the “ “ key to control the play and pause. You may also control by
using the wired remote controller and infrared remote controller. For detailed operating methods,
please refer to the introduction of key functions in the Operating Instructions.
5．Instructions for Manual Operation of Tuner
Press the “TUNER” key on the panel to enter the tuner control interface (Fig. 5-1). From this
interface, you can control the tuner band, radio frequency and channel. In zone 1, the tuner
（图 4-1） （图 5-1）
BAND FM
100.45MHz
SIGN
STEREO
AM/FM PLAYER
CH 40
LOOP
MP3 PLAYER
03
\
0 1
star
PLAY ALL
00
：
58
04
：
27

Multi-room Music System
16
effect is best set to STEREO mode from the "Listening Mode” of “Hall Sound Field Mode Setting".
5.1 Band Selection
From the panel, you may press the BAND key under the screen to switch between AM and FM.
You may use the band switching key on the wired remote controller and infrared remote controller
to switch between AM and FM. The frequency range of AM band is 522kHz-1620kHz; and the
frequency range of FM band is 87.00MHz-108.00MHz.
5.2 Search Radio
From the panel, you may press the “ “ and " “ key under the screen to search the
radio storage number forward or backward and load the saved radio. You may also search the
radio by rotating the digital wheel. Rotate the digital wheel clockwise to search toward the high
band, with slow rotation of the digital wheel for one grid to increase the frequency by one step
(One step is 50kHz for FM band and 9kHz for AM band). When searching the radio station, the
black message indication bar as shown in Fig. 5-1 will be displayed behind "Signal” option. The
indication bar will be become wider if the signal is strong, and will become narrow if the signal is
weak. Quick rotation of the digital wheel for one turn can enter the auto search state. It will be
stopped when searching the radio frequency or reaching the highest band. Rotate the digital wheel
counterclockwise to search toward the low band, with slow rotation of the digital wheel for one grid
to decrease the frequency by one step (One step is 50kHz for FM band and 9kHz for AM band).
The signal display and auto search are same as above. You may also use the key
on the panel to search the radio frequency automatically.
5. 3 Store Radio
The radio frequencies, no matter searched manually or automatically, can be stored into 40 radio
storage numbers by pressing MEMO key in combination with the key or . When
storing the radio, the storage number behind the “Storage” option on screen will blink with the first
press of “MEMO” key. After adjusting the storage number properly with or key, you can
press “MEMO” key again to store the searched radio frequency to the current storage number.
5. 4 Mute Mode
By pressing “ ” key on the panel, the icon on the screen will change to (Fig. 5-2),
indicating that the radio is set to mute mode. Press again to return to voice state. Upon
arrival of the timer point, the setting for the timer point will be executed.
5.5 Load Radio Frequency
 In the timer point, you may load the stored radio frequency. For the operating methods,
please refer to the instructions for setting of timer point.
 You may use wired remote controller and infrared remote controller to load the stored radio
(Fig. 5-2)
BAND FM
100.45MHz
SIGN
STEREO
AM/FM PLAYER
CH 40
Tuner Mute Mode

Multi-room Music System
17
frequency directly. For the operating methods, please refer to the key functions of remote
controller.
6．Timer Programming
Press the TUNER key on the panel to enter the operation option interface (Fig. 6-1) (next page).
From this interface, you may set five functions, i.e. timer setting, time calibration, infrared learning,
time copy and system setting.
6.1 Timer Setting
From “Operation Option” interface, rotate the digital wheel to move the cursor to “Timer Setting”
option, and press the digital wheel once to enter the timer setting interface (Fig. 6-1-1) (next page).
Then, rotate the digital wheel to carry out different settings for the timer point.
6.1.1 Week Setting:
Rotate the digital wheel to move the cursor to “Week” option and press the digital wheel. When the
icon appears, rotate the digital wheel to load the week to be selected (e.g. Wednesday). Then,
press the digital wheel to confirm and exit.
6.1.2 Add Timer Point:
Adjust the date of Week option to display of a specific day (e.g. Monday). In this case, the other
options on the interface will display all the information of the first timer point on that day. If there is
no display for other options on the interface (Fig. 6-1-2) (next page), it indicates there is no timer
point on that day. To add a timer point, firstly press “Add” option and then set the other options. If
there is a timer point on this day, it is needed to add a new timer point. In this case, please firstly
press “Add” option and then program the other information for this timer point. The serial number
of the added timer point will be always sorted at the end of all timer points on that day. But the
execution of the timer point will be automatically in accordance with the time sequence.
6.1.3 Serial Number Setting:
Rotate the digital wheel to move the cursor to the number pane behind the "Serial Number” option
and then press the digital wheel once, so that the icon will appear behind the pane. Then,
rotate the digital wheel to load the number to be selected. After that, press the digital wheel once to
confirm and exit.
6.1.4 Power Setting:
This operation is used for timer control over the power output socket on the rear panel of the
equipment (Item 8 on Page 4). The socket provides AC220V output for other equipment. Setting
the power to “ON” indicates that the output socket will have power output upon arrival of timer
point. Setting to “OFF” indicates that the output socket will have no power output upon arrival of
timer point. Setting to “…” indicates default, that is, keep the last setting. The operating method is
same as that for serial number.
6.1.5 Time Setting:
This is used for setting the start time of timer point. The time may be accurate to second based on
24-hour system. The method for time setting is same as that for serial number.
6.1.6 Ringer Setting:

Multi-room Music System
18
This is used for setting the ringer type on timer point, available with four options, i.e. “1, 2, 3 and –“.
“1” refers to note “1 3 5 1”; “2” refers to note “1 5 3 1”, “3” refers to note “1 5 1 5”; and “-“ refers to
no selection of ringer. To set the ringer, rotate the digital wheel to move the cursor to “Ringer”
option and press the digital wheel once, until the icon appears. After that, rotate the digital
wheel to select and then press the digital wheel again to confirm and exit.
6.1.7 Timer Setting for MP3 Track
 Rotate the digital wheel to move the cursor to “MP3 Setting” option. Then, press the digital
wheel once to enter MP3 Timer Setting interface (Fig. 6-1-3). Under this interface, you may
select 3 tracks for play on MP3 player at the timer point. “00/00” represents the music to be
played, with the first two numbers indicating the directory of the music and the last two
numbers indicating the serial number of the music in this directory. Setting the directory to
“00” indicates no directory, and setting the music to “00” indicates no selection of music.
 Move the cursor to the small pane displaying the number. Then, press the digital wheel
once until the icon appears behind the number pane. Rotate the digital wheel to select
between "Not Cycle”, “Cycle” and “Sequential”. This setting is used for controlling the play
sequence of 3 tracks selected.
 After completing the above operations, press “Confirm” to confirm the setting and exit the
MP3 timer setting interface.
The MP3 program set for each timer point is valid for corresponding timer point only. Upon
arrival of the next timer point, the system will execute the setting of the next timer point,
which will override the MP3 setting at current timer point. If there is no setting to MP3 at
the next timer point, the MP3 will not activate upon arrival of next timer point.
6.1.8 TUNER Timer Setting
Rotate the digital wheel to move the cursor to “TUNER Setting" option, and press the digital wheel
once to enter TUNER timer setting interface (Fig. 6-1-4). Under this interface, you may select the
TUNER band and frequency.
 Move the cursor to the pane behind the “Band” option. Then, press the digital wheel once,
until the icon appears. After that, rotate the digital wheel to select. Then, press the
digital wheel to confirm the selection and exit. Select the “Frequency" option according to
the method above.
Note: The “…” appearing during band selection indicates that this setting is
(Fig. 6-1)
(Fig. 6-1-1)
MON.
:
ID
0
0
1
POWER
ON
NEW
MP3 SET
TIME
08
10
0
0
:
CHIME
--
TUNER SET ZONE SET
DEL
DEL A DAY
RET
(Fig. 6-1-2) (Fig. 6-1-3)
MP3 TIMER SET
SELECT THE DIR AND NUMBER:
LOOP
OK
1
\
12
05
2
\
06
00
3
\
00
07
LOOP
OPTION
TIMER SET
IR SETUP
ADJ TIME
COPY TIMER
EXIT SYSTEM SET
MON.
:
ID
POWER
NEW
MP3 SET
TIME
:
CHIME
TUNER SET ZONE SET
DEL
DEL A DAY
RET