Lynx HR-SERIES User manual

USER MANUAL
V.23.01
Lynx Pro Audio S.L.
HR Series
HR-6
HR-8
HR-1564/7 & HR-1596/7
HR-1264/7 & HR-1296/7
HR-1564/5 & HR-1596/5
HR-1264/5 & HR-1296/5
HR-28
HR-26
HR-218/36
HR-218/12
HR-215S
HR-18/6

Manufacturer
CE CERTIFICACTION, EUROPEAN PRODUCT
LYNX Pro Audio S.L.
Calle 1 - Pol. Ind. Picassent
E-46220 Picassent (Valencia)
This user guide is property of Lynx Pro Audio S.L. Any reproduction of this manual, by any means is strictly prohibited.
Copyright 2020. All rights reserved.
INTRODUCTION
To facilitate the correct and reliable use of the HR cabinets we have designed this instruction manual, please read it
before proceeding to install the cabinet.
Please observe the technical data carefully and do not ignore the instructions included within this manual.

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 3
CONTENTS
•SAFETYPRECAUTIONS 5
•CABINETCONNECTIONS
Normative 6
Connectors 8
Recommendations 10
•CABINETINSTALLATION
Mountingdevices 16
Installationaccessories 16
Coveragechangewiththerotatablehorn 16
Modepassiveorbi-amp 18
•RAINBOW3DACOUSTICSIMULATIONSOFTWARE 19
•EACHMODELTECHNICALDATA 20
•CERTIFICATIONSANDGUARANTEE 45


HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 5
Beforestartingtousethisdevice,pleasereadthisinstructionmanualcarefully.
Keep these instructions in the place where the equipment will be used and with easy access to them.
•Heavy equipment
Applybackprotectionwhenusingthesystem.Avoidloadingandunloadingatheights.
•Hearing damage risk
Thesesystemscanreproducelargequantitiesofsoundpressurewhichcandamagehearing.Takeprecautionsif
you are going to be near them for extended amounts of time and do not get too close.
•Hanging / Flying
Donothangthecabinetsfromthehandlesorfromanyotherpartotherthanthedesignatedhangingpoint.When
yingthissystempleaseobservethetechnicaland“Rainbow”softwaredatacarefully.Neverexceedthemaximum
safeworkingloadsorignoretheinstructionsincludedwithinthismanual.UseOnlyyingaccessoriesprovided
byLynxProAudioS.L.Riggingmustbealwayscarriedoutbyprofessionals.
•Delicate Material
Pleaseensurenoforeignobjectorwaterentersthespeaker.Onlycleantheunitwithdrycloths.Donotusesolvents.
•Overheating / Fire risk
Toreducetheriskofthespeakeroverheating,avoiddirectcontactwithsunlight.Avoidplacingtheunitclose
toheatinducingobjectssuchasradiators.Donotcovertheequipmentinuseanddonotblockanyventilation
openings.Donotputnakedame,suchaslightedcandles,closeorontopoftheunit.
•Electromagnetic and interferente emissions
Avoidplacingobjectswhichthroughelectromagneticwavescandamagetheunit,suchasmobilephones,lap
tops, magnetic strip cards etc.
Thissystemcomplieswithnormatives EN55103-1(1)
EN55103-2(2)
(1)Thisdevicemaynotcauseharmfulinterferences.
(2)Thisdevicemayreceiveinterferenceincludinginterferencesthatmaycauseundesiredworking.
•IMPORTANT NOTE
ThisEquipmentmustbeusedinaccordancewiththeseinstructionsandbytrainedprofessionalpersonnelonly.
Thisequipmentshouldnotbeusedinplaceswithextremetropicalclimates.Don’texposethisapparatustoextreme
humidity and or temperature values.

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 6
CABINET CONNECTIONS
•Normative
The HR cabinets meet the following standards:
EN55103-1:1996:Electromagneticcompatibility.Productfamilystandardforaudio,video,audio-visualand
entertainmentlightingcontrolapparatusforprofessionaluse(-1Emmision).
EN55103-1:1996:Electromagneticcompatibility.Productfamilystandardforaudio,video,audio-visualand
entertainmentlightingcontrolapparatusforprofessionaluse.(-2Immunity)
EN60065:2002:Audio,videoandsimilarelectronicapparatus.Safetyrequirements.
•Connectors
The HR cabinets have a connection panel at the rear of the cabinet. This consists
of2internallybridgedNeutrikNL4-MPconnectorswhichapplynoprocessto
the signal.
Note:Ifpins+-2arenotusedtheywillstillbeinternallybridged.
The following table indicates which pins are used for all the models, with passive
andbi-ampliedmodes.
PASSIVE Connector Speakon connections per box Impedance Rated power Program power
HR-6 NL4MP ±1 2 16Ω 200WAES 400WAES
HR-8 NL4MP ±1 2 8Ω 300WAES 600WAES
HR-1564/7 NL4MP ±1 2 8Ω 700WAES 1400WAES
HR-1596/7 NL4MP ±1 2 8Ω 700WAES 1400WAES
HR-1264/7 NL4MP ±1 2 8Ω 700WAES 1400WAES
HR-1296/7 NL4MP ±1 2 8Ω 700WAES 1400WAES
HR-1564/5 NL4MP ±1 2 8Ω 500WAES 1000WAES
HR-1596/5 NL4MP ±1 2 8Ω 500WAES 1000WAES
HR-1264/5 NL4MP ±1 2 8Ω 500WAES 1000WAES
HR-1296/5 NL4MP ±1 2 8Ω 500WAES 1000WAES
HR-28 NL4MP ±1 2 4Ω 500WAES 1000WAES
HR-26 NL4MP ±1 2 8/4Ω 400WAES 800WAES
HR-218/36 NL4MP ±1 2 4Ω 3600WAES 7200WAES
HR-218/12 NL4MP ±1 2 4Ω 2000WAES 4000WAES
HR-215S NL4MP ±1 2 4Ω 2000WAES 4000WAES
HR-18/6 NL4MP ±1 2 8Ω 1000WAES 2000WAES
BI-AMP Connector Speakon connections per box Impedance Rated power Program power
HR-1564/7 NL4MP LF±1/HF±2 2 8Ω 700W/80W 1400W/160W
HR-1596/7 NL4MP LF±1/HF±2 2 8Ω 700W/80W 1400W/160W
HR-1264/7 NL4MP LF±1/HF±2 2 8Ω 700W/80W 1400W/160W
HR-1296/7 NL4MP LF±1/HF±2 2 8Ω 700W/80W 1400W/160W
HR-1564/5 NL4MP LF±1/HF±2 2 8Ω 500W/60W 1000W/120W
HR-1596/5 NL4MP LF±1/HF±2 2 8Ω 500W/60W 1000W/120W
HR-1264/5 NL4MP LF±1/HF±2 2 8Ω 500W/60W 1000W/120W
HR-1296/5 NL4MP LF±1/HF±2 2 8Ω 500W/60W 1000W/120W
HR-28 NL4MP LF±1/HF±2 2 4Ω 500W/70W 1000W/140W
HR-26 NL4MP LF±1/HF±2 2 8/4Ω 400W/70W 800W/140W

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 7
•Connectors
Toconnectthespeakonfollowtheinstructionsing.1:
Insertthemalespeakoninitscorrespondingholeand
turnrightuntilitclicks.Thisxesitsafelyandstrongly
andhelpsstopitbeingpulledoutbymistake.
Attheotherendofthecableconnectinthesameway
totheamplierchannel.
FurthermorethecabinetsHR-6andHR-8canbesuppliedwith4terminalblocks(7.62mmbetweenpins)insteadof
theNeutrikNL4-MP.
•Recommendations
Alwaysensurecablesareingoodcondition.Knowtherecommendedcablelengthandthicknessaccordingtothecabi-
netandquantityyouareinstalling.Anincorrectconnectioncanaffectthefunctioningofthesystemorevendamage
it.Cablethicknesswillvaryaccordingtocabinetimpedance,quantityanddistance.Thisisespeciallyimportantwhen
connectingSubwoofers.
Asaguide,pleaseseethefollowingtablewhichoutlinesthethicknessdependingonthepowerandlengthofcable.
BearinmindOhmratingsontheampliersusedtopowerthecabinets.Forexample,2ohmampliercongurations
are not recommended due to the excessive power from the amp output.
Neverconnectmorecabinetsthanrecommendedinparallel.Withparallelconnections,thetotalimpedancecanbe
calculated by dividing the impedance of 1 cabinet by the number connected.
Maximum recommended cable length for low impedance systems
Wire section AWG number Cable resistance in 100 meters
Maximum recommended lenght (in meters)
2 Ω 4 Ω 8 Ω 16 Ω
13.3 mm² 6 0.25Ω 24 57 122 253
6.63mm² 8 0.49Ω 12 28 61 126
5.26mm² 10 0.62Ω 10 23 48 100
3.31 mm² 12 0.99Ω 6 14 30 63
2.08mm² 14 1.57Ω 4 9 19 40
1.31 mm² 16 2.49Ω 2 6 12 25
0.82mm² 18 3.98Ω 2 4 8 16
0.52mm² 20 6.28Ω 12 5 10
0.33 mm² 22 9.89Ω 1 1 3 6

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 8
•Coverage change with the rotatable horn
Many HR cabinets enable the horn to be rotated offering further coverage options. The rotatable horn
feature enables the installer to also set the cabinet up horizontally whilst maintaining the horn features
such as horizontal and vertical coverage. This is helpful in installs with low ceilings or where esthetically the
cabinetlooksbetterhorizontally.
The following HR cabinets have rotatable horns:
HR-1564/7(60ºx40º)
HR-1596/7(90ºx60º)
HR-1264/7(60ºx40º)
HR-1296/7(90ºx60º)
HR-1564/5(60ºx40º)
HR-1596/5(90ºx60º)
HR-1264/5(60ºX40º)
HR-1296/5(90ºx60º)
HR-28(90ºx60º)
HR-8(90ºx60º)
•Mode passive or bi-amp:
AlltheHRcabinetsaresuppliedfromthefactoryinpassivemode.Tochangefrompassivetobi-ampmode
is very simple, you only have to unscrew the connector pannel located at the rear of the cabinet and change
thecablefromthePASSIVEplugtotheACTIVEplug.Theseplugsaremarkedonthecircuitboard.
Change the cable from one plug to the other and screw the
connectorpannelagain.That’sall.
You will have the cabinet ready in bi-amp mode, with pin ± 1
connected to Low Frequencies and pin ± 2 connected to High
Frequencies.
NOTE:Thebi-ampmodeworkswithouttheinternalcrossoversowithoutitsprotectionforthespeakers.
Toturnthehorntheusermustrstremovethecabinet
grill,unscrewthehorn,rotateit90ºandscrewitback
in. Just be sure to maintain the connection and put the
grillbackon.
1 2

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 9
•Mounting advices:
-TheHRcabinetsaredesignedtobeusedinallkindofxedinstallations.
-Cabinetsmustbeinstalledandsuspendedbyprofessionalinstallers.
-Allresponsibilitylieswiththeinstallationcompany.
-Neverplacethesafetyofpersonnelatrisk.
-Alwayschecktheaccessories,slingsetcareingoodconditionandthesuspensionpointissecure
and free of excess weight, vibration, etc.
-Becarefulwherethecabinetsaresuspendedfrom.
•Installation accessories:
The HR cabinets are designed to be used in installations and the full range cabinets come with rigging points
sothattheycanbeeasilyinstalled.Toxthecabinetstoawallortoholdthemfromtheceilingisveryeasy
using some simple accessories:
CABINET INSTALATION
WB-20
WallbracketforHR-8
AGR-10
EyeboltforallthefullrangeHR
cabinets.
SC-FC1
InstallstudforHR-1564/7,HR-1596/7,
HR-1264/7andHR-1296/7
SC-FC2
HeavydutystudforHR-1564/7,HR-
1596/7,HR-1264/7andHR-1296/7
UBR-28UBR-26UBR-6UBR-8
HorizontalbracketforHR-28orHR-26
orHR-6orHR-8
WB-10
WallbracketforHR6

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 10
RAINBOW 3D Acoustic Prediction Software
LynxProAudio’sR&DdepartmentisworkingonRainbow3D,anewacousticsimulationsoftwarewithdynamic3D
features.Withasophisticateddesign,Rainbow3Dstandsoutforitsspeed,beingabletoprovideasimulationinjusta
fewseconds.Italsoprovidesalgorithmsforbeamsteeringandoptimizingthelisteningarea.
•Designed from scratch by professionals
Rainbow3DhasbeenprogrammedfromscratchbyLynxProAudioengineers,usingnewprogrammingprocedures
that achieve an effective simulation with really low calculation time.
•Multiple listening zones
TheprogramcansimulateallLynxProAudio’sacousticenclosureslocatedina3Dspace,includingtheclassicside,top
andfrontviews.Itcanalsodenemultiplelisteningzonesandallowsoffsetpositioningandsymmetry.Blueprintimages,
texturesandPNGformatpicturescanbeimported.
•Unlimited sound sources
Allowstheacousticsimulationforanunlimitednumberofsoundsourcesandaudiosystems.Youcanplaceasmany
systems(subwoofers,linearrays,columnsandindividualboxes)asyoudesire.Also,thelinearrayscanbeplacedin
stackorownconguration.
•Beam steering
Rainbow3DhastheabilitytoaddDSPprocessingtothesimulationandusesalgorithmstocontrolthedirectivity(beam
steering)incolumns,withouttheneedtotiltthemphysically,beingabletodividethecolumnintoseveralbeamsthat
point to different zones.
•Accurate optimization thanks to FIR lters
Optimizedalgorithmsareusedinthelisteningareatoimprovethesoundcoverageandthefrequencyresponse.This
featurecanbeexecutedinamatterofseconds.Additionally,theexportofFIRcoefcientscanbeperformedwiththe
optimizationforlaterloadingintheDSPviaEthernetoraUSBdevice.Inthenearfuturedirectcommunicationwith
LynxProAudioandOCSwillbeavailable.
•Multiple measures and tools
Likewise,theR&Ddepartmentisdevelopingmultiplemeasurementandanalysistoolsforthecalculateddata.For
example,thesoundpressurecurves(SPL)inthelisteningareasandthecaptureofvirtualmeasurementsthatshow
thefrequencyresponseinthepointsoflocationindicatedandadded.Amongothertoolsyouwillndautosplayanda
wizard to set up different subwoofer arragements.

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 11
•Technical Data:
Components:
•LF: 1x6.5”,2”voicecoil
•HF: 1xTweeter1”–1.25”aluminiumvoicecoil,Mylardiaphragm
Frequencyrange: 62Hz–20KHz(-10dB)
Frequencyresponse: 88Hz–18KHz(±3dB)
Sensitivity: 93dB(1W@1m)
MaxSPL/Peak: 116dB–122dBPeak
Coverageangle: 90ºHx90ºV
Power: 200W(400Wprogram,800Wpeak)
Crossover: Passive
Nominalimpedance: 16Ω
Connectors: 2xNeutrikSpeakonNL4MP/4xTerminalBlock7.62mmbetweenpins
Finish: Polyureacoating-othercolours(RAL)available
Material: 15mmpremiumbirchplywood
Dimensions: 300x236x220mm(HxWxD)
Weight: 7.5Kg(17lbs)
•Key features
•Ultra-compact
•Versatilesoundreinforcement
•Highperformance
•90ºx90ºwidedispersion
•ARKprocessoroptimisedpreset
•Multiplerigging/mountingoptions
•HR-6
Ultra compact, light and very versatile passive enclosure specially designed for all types of installation
projects,bothindoorsandoutdoors(outdoorversionavailable).Itconsistsofa6.5”transducer(impedance
16ohm)anda1”highfrequencyMylartweeter.Itoffers119dBSPL(400Wprogram).
Itis anexcellentsolutionforlargeinstallationprojectsorbasicinstallations.It hasa completerangeof
accessoriestoprovideaneasierinstallation.Althoughthiscabinetcanbeusedwithoutaprocessor,we
strongly recommend that the cabinet presets are applied for maximum optimization and performance.
ForLowFrequencyreinforcement,severalsubwooferoptionsareavailable.
HR-6 DATASHEET
•Perfectly suited for
•Club&barinstallations
•Soundreinforcement
•Theatres
•Housesofworship
•Multimediaspaces
•Publicaddress

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 12
•Dimensions:
ThiscabinetisalsoavailableforMarineenvironments,suchascruiseshipsforexample.OurMarineoption
speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the
elements.
Colours:
Blackpolyureacoatingwithmicrotexturedmetalparts.
RALavailableonrequest.Polyureacoatingwithaliphaticcolourpaint.
1.Anodizedaluminiumlogofordurabilityoutdoors.
2.Stainlesssteel 1 mm 316 Lgrill. Alsoavailablein
aluminum with protective layer and micro textured
paint.
3.Weatherstripedgingforextremeprotection.
4. Acoustex lter: hydrophobic polyester sheet
to prevent the penetration of water and external
elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust
particles.
6.Waterproofprotectedconeonbothsides
7. Aluminum back plate with pressure gland for an
extra tight connection and easy installation.
8.M10stainlesssteel316Lscrews(A4).
•Marine Grade option:

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 13
•Technical Data:
Components:
•LF: 1x8”Neodimium–2”aluminumvoicecoilkaptoncone
•HF: 1”ExitcompressionDriver,1.75”aluminiumvoicecoil,Polyesterdiaphragm
Frequencyrange: 60Hz–20KHz(-10dB)
Frequencyresponse: 78Hz–18KHz(±3dB)
Sensitivity: 97dB(1W@1m)
MaxSPL/Peak: 122dB–128dBPeak
Coverageangle: 90ºx90ºrotatable
Power: 300W(600Wprogram,1200Wpeak)
Crossover: Passive
Nominalimpedance: 8Ω
Connectors: 2xNeutrikSpeakonNL4MP/4xTerminalBlock7.62mmbetweenpins
Finish: Polyureacoating-othercolours(RAL)available
Material: 15mmpremiumbirchplywood
Dimensions: 420x274x298mm(HxWxD)
Weight: 10Kg(22lbs)
•Key features
•Ultra-compact
•Versatilesoundreinforcement
•Highperformance
•90ºx90ºwidedispersion
•ARKprocessoroptimisedpreset
•Multiplerigging/mountingoptions
•HR-8
Passiveultracompact,lightweightandveryversatileenclosureespeciallydesignedforalltypesofinstallation
projects.Itconsistsofa8”transducerwithNeodimiummagnetanda1”highfrequencycompressiondriver.
Itoffers125dBSPL(600Wprogram).
Itisanexcellentsolutionforalltypesofxedinstallationsandhasacompleterangeofaccessoriestoprovide
aneasierinstallation.Althoughthiscabinetcanbeusedwithoutaprocessor,westronglyrecommendthat
the cabinet presets are applied for maximum optimization and performance.
ForLowFrequencyreinforcement,severalsubwooferoptionsareavailable.
HR-8 DATASHEET
•Perfectly suited for
•Club&barinstallations
•Soundreinforcement
•Theatres
•Housesofworship
•Multimediaspaces
•Publicaddress

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 14
•Dimensions:
ThiscabinetisalsoavailableforMarineenvironments,suchascruiseshipsforexample.OurMarineoption
speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the
elements.
Colours:
Blackpolyureacoatingwithmicrotexturedmetalparts.
RALavailableonrequest.Polyureacoatingwithaliphaticcolourpaint.
1.Anodizedaluminiumlogofordurabilityoutdoors.
2.Stainlesssteel 1 mm 316 Lgrill. Alsoavailablein
aluminum with protective layer and micro textured
paint.
3.Weatherstripedgingforextremeprotection.
4. Acoustex lter: hydrophobic polyester sheet
to prevent the penetration of water and external
elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust
particles.
6.Waterproofprotectedconeonbothsides
7. Aluminum back plate with pressure gland for an
extra tight connection and easy installation.
8.M10stainlesssteel316Lscrews(A4).
•Marine Grade option:

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 15
•Technical Data:
Components:
•LF: 15”,3.5”aluminiumvoicecoil,waterprooffrontsideconetreatment,
neodymium magnet
•HF: 1.4”ExitcompressionDriver,2.5”aluminiumvoicecoil,Titaniumdiaphragm
Frequencyrange: 58Hz–20KHz(-10dB)
Frequencyresponse: 64Hz–18KHz(±3dB)
Sensitivity: PassiveMode:94dB(1W@1m)
MaxSPL/Peak: PassiveMode:123dB–129dBPeak
Bi-AmpLF:126dB–132dBPeak
Bi-AmpHF:127dB–133dBPeak
Coverageangle: Constantdirectivityhorn(Rotatable)
90ºx60º(HR-1596/7)/60ºx40º(HR-1564/7)
Power: Passivemode:700W(1400Wprogram,2800Wpeak)
Bi-AmpLF:700W(1400Wprogram,2800Wpeak)
Bi-AmpHF:80W(160Wprogram,320Wpeak)
Crossover: Bi-amp/Passive(selectable)
Nominalimpedance: 8ΩPassive/Bi-ampLF8Ω,HF8Ω
Connectors: 2xNeutrikSpeakonNL4MP
Finish: Polyureacoating-othercolours(RAL)available
Material: 15mmpremiumbirchplywood
Dimensions: 790x444.5x541mm(HxWxD)
Weight: 32Kg(70.5lbs)
•Key features
•Versatilesoundreinforcement
•Highperformance
•Coverage60ºx40ºor90ºx60º,rotatablehorns
•ARKprocessoroptimisedpreset
•Precissebandpassdirectivitycontrol
•Multipleriggingandmountingoptions
•HR-1564/7 & HR-1596/7
Highperformance,ultra-compact,fullrange,twowaybi-amp/passivecabinet.Itconsistsofa15”transducer
anda1.4”highfrequencycompressiondriver.
Theyoffer2dispersionoptions.ThemodelHR-1564/7providesanarrowdispersionof60ºx40º(rotatable)
andthemodelHR1596/7offersawidedispersionof90ºx60º(rotatable).129dBSPL(1400Wprogram)
This cabinet is ideal for a wide variety of applications and has a range of accessories that provide an easier
assembly.Althoughthiscabinetcanbeusedwithoutaprocessor,westronglyrecommendthatthecabinet
presets are applied for maximum optimization and performance.
ForLowFrequencyreinforcement,severalsubwooferoptionsareavailable.
HR-1564/7 & HR-1596/7 DATASHEET
•Perfectly suited for
•Club&barinstallations
•Soundreinforcement
•Theatres
•Housesofworship
•Conferences
•Publicaddress

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 16
•Dimensions:
ThiscabinetisalsoavailableforMarineenvironments,suchascruiseshipsforexample.OurMarineoption
speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the
elements.
Colours:
Blackpolyureacoatingwithmicrotexturedmetalparts.
RALavailableonrequest.Polyureacoatingwithaliphaticcolourpaint.
1.Anodizedaluminiumlogofordurabilityoutdoors.
2.Stainlesssteel 1 mm 316 Lgrill. Alsoavailablein
aluminum with protective layer and micro textured
paint.
3.Weatherstripedgingforextremeprotection.
4. Acoustex lter: hydrophobic polyester sheet
to prevent the penetration of water and external
elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust
particles.
6.Waterproofprotectedconeonbothsides
7. Aluminum back plate with pressure gland for an
extra tight connection and easy installation.
8.M10stainlesssteel316Lscrews(A4).
•Marine Grade option:

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 17
•Technical Data:
Components:
•LF: 15”,2.5”voicecoil,MaltCrossCoolingSystem
•HF: 1.4”ExitcompressionDriver,1.75”aluminiumvoicecoil
Frequencyrange: 58Hz–20KHz(-10dB)
Frequencyresponse: 63Hz–18KHz(±3dB)
Sensitivity: PassiveMode:96dB(1W@1m)
MaxSPL/Peak: PassiveMode:123dB–129dBPeak
Bi-AmpLF:125dB–131dBPeak
Bi-AmpHF:126dB–132dBPeak
Coverageangle: Constantdirectivityhorn(Rotatable)
90ºx60º(HR-1596/5)/60ºx40º(HR-1564/5)
Power: Passivemode:500W(1000Wprogram,2000Wpeak)
Bi-AmpLF:500W(1000Wprogram,2000Wpeak)
Bi-AmpHF:60W(120Wprogram,240Wpeak)
Crossover: Bi-amp/Passive(selectable)
Nominalimpedance: 8ΩPassive/Bi-ampLF8Ω,HF8Ω
Connectors: 2xNeutrikSpeakonNL4MP
Finish: Polyureacoating-othercolours(RAL)available
Material: 15mmpremiumbirchplywood
Dimensions: 790x444.5x541mm(HxWxD)
Weight: 30Kg(66lbs)
•Key features
•Versatilesoundreinforcement
•Highperformance
•Coverage60ºx40ºor90ºx60º,rotatablehorns
•ARKprocessoroptimisedpreset
•Precissebandpassdirectivitycontrol
•Multipleriggingandmountingoptions
•HR-1564/5 & HR-1596/5
Highperformance,ultra-compact,fullrange,twowaybi-amp/passivecabinet.Itconsistsofa15”transducer
anda1”highfrequencycompressiondriver.
Theyoffer2dispersionoptions.ThemodelHR-1564/5providesanarrowdispersionof60ºx40º(rotatable)
andthemodelHR1596/5offersawidedispersionof90ºx60º(rotatable).129dBSPL(1000Wprogram).
This enclosure is ideal for a wide variety of applications and has a range of accessories that provide an
easierassembly.Althoughthiscabinetcanbeusedwithoutaprocessor,westronglyrecommendthatthe
cabinet presets are applied for maximum optimization and performance.
ForLowFrequencyreinforcement,severalsubwooferoptionsareavailable.
HR-1564/5 & HR-1596/5 DATASHEET
•Perfectly suited for
•Club&barinstallations
•Soundreinforcement
•Theatres
•Housesofworship
•Conferences
•Publicaddress

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 18
•Dimensions:
ThiscabinetisalsoavailableforMarineenvironments,suchascruiseshipsforexample.OurMarineoption
speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the
elements.
Colours:
Blackpolyureacoatingwithmicrotexturedmetalparts.
RALavailableonrequest.Polyureacoatingwithaliphaticcolourpaint.
1.Anodizedaluminiumlogofordurabilityoutdoors.
2.Stainlesssteel 1 mm 316 Lgrill. Alsoavailablein
aluminum with protective layer and micro textured
paint.
3.Weatherstripedgingforextremeprotection.
4. Acoustex lter: hydrophobic polyester sheet
to prevent the penetration of water and external
elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust
particles.
6.Waterproofprotectedconeonbothsides
7. Aluminum back plate with pressure gland for an
extra tight connection and easy installation.
8.M10stainlesssteel316Lscrews(A4).
•Marine Grade option:

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 19
•Technical Data:
Components:
•LF: 12”,3.5”aluminiumvoicecoil,waterprooffrontsideconetreatment,
neodymium magnet
•HF: 1.4”ExitcompressionDriver,2.5”aluminiumvoicecoil,Titaniumdiaphragm
Frequencyrange: 59Hz–20KHz(-10dB)
Frequencyresponse: 65Hz–18KHz(±3dB)
Sensitivity: PassiveMode:94dB(1W@1m)
MaxSPL/Peak: PassiveMode:123dB–129dBPeak
Bi-AmpLF:125dB–131dBPeak
Bi-AmpHF:127dB–133dBPeak
Coverageangle: Constantdirectivityhorn(Rotatable)
90ºx60º(HR-1296/7)/60ºx40º(HR-1264/7)
Power: Passivemode:700W(1400Wprogram,2800Wpeak)
Bi-AmpLF:700W(1400Wprogram,2800Wpeak)
Bi-AmpHF:80W(160Wprogram,320Wpeak)
Crossover: Bi-amp/Passive(selectable)
Nominalimpedance: 8ΩPassive/Bi-ampLF8Ω,HF8Ω
Connectors: 2xNeutrikSpeakonNL4MP
Finish: Polyureacoating-othercolours(RAL)available
Material: 15mmpremiumbirchplywood
Dimensions: 705x377x495mm(HxWxD)
Weight: 26Kg(57lbs)
•Key features
•Versatilesoundreinforcement
•Highperformance
•Coverage60ºx40ºor90ºx60º,rotatablehorns
•ARKprocessoroptimisedpreset
•Precissebandpassdirectivitycontrol
•Multipleriggingandmountingoptions
•HR-1264/7 & HR-1296/7
Highperformance,ultra-compact,fullrange,twowaybi-amp/passivecabinet.Itconsistsofa12”transducer
anda1.4”highfrequencycompressiondriver.
Theyoffer2dispersionoptions.ThemodelHR-1264/7providesanarrowdispersionof60ºx40º(rotatable)
andthemodelHR1296/7offersawidedispersionof90ºx60º(rotatable).129dBSPL(1400Wprogram).
This cabinet is ideal for a wide variety of applications and has a range of accessories that facilitate its
assembly.Althoughthiscabinetcanbeusedwithoutaprocessor,westronglyrecommendthatthecabinet
presets are applied for maximum optimization and performance.
ForLowFrequencyreinforcement,severalsubwooferoptionsareavailable.
HR-1264/7 & HR-1296/7 DATASHEET
•Perfectly suited for
•Club&barinstallations
•Soundreinforcement
•Theatres
•Housesofworship
•Conferences
•Publicaddress

HR Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 20
•Dimensions:
ThiscabinetisalsoavailableforMarineenvironments,suchascruiseshipsforexample.OurMarineoption
speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the
elements.
Colours:
Blackpolyureacoatingwithmicrotexturedmetalparts.
RALavailableonrequest.Polyureacoatingwithaliphaticcolourpaint.
1.Anodizedaluminiumlogofordurabilityoutdoors.
2.Stainlesssteel 1 mm 316 Lgrill. Alsoavailablein
aluminum with protective layer and micro textured
paint.
3.Weatherstripedgingforextremeprotection.
4. Acoustex lter: hydrophobic polyester sheet
to prevent the penetration of water and external
elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust
particles.
6.Waterproofprotectedconeonbothsides
7. Aluminum back plate with pressure gland for an
extra tight connection and easy installation.
8.M10stainlesssteel316Lscrews(A4).
•Marine Grade option:
Other manuals for HR-SERIES
1
This manual suits for next models
16
Table of contents
Other Lynx Subwoofer manuals