INSTRUCTION MANUAL
ROAD HANDLEBAR l ERGO HANDLEBAR
pg. 1M2023.01
INTRODUCTION
Welcome to the ZEROLITE family! Thank you for putting your trust
in our components. You have chosen one of the stiffest, lightest,
best quality products. Original craftsmanship –designed, tested,
and manufactured in Türkiye.
Your safety is our number one priority. Please read this manual
carefully before you install your new ZEROLITE Components
product or ride it for the first time. Third party users must also be
informed about the following provisions. Therefore, please keep
these instructions in a safe place for later usage.
These operating instructions are intended for the user of our Road
Handlebar and Ergo Handlebar and include information on the
installation, maintenance, and care. For your own safety please
follow all instructions.
ZEROLITE Team
WARRANTY & SUPPORT
OUR PROMISE
We manufacture the highest quality products for your bike and want
to ensure the best possible service and support. Therefore, we offer
the original owner of ZEROLITE Components products a 2-year
warranty and a lifetime crash replacement program for our entire
product range.
PRODUCT REGISTRATION
To get the manufacturer ‘s warranty and to participate in the crash
replacement program, you must register your components with us.
Send us an email with a copy of the invoice and the following
information to sales@mticomposites.com :
Name, Surname, Address, Phone number.
We vouch for the quality of our products „Made in Türkiye“. This is
why we warrant our carbon products to be free from defects in
material or workmanship for 2 years from the original purchase date
(product registration required).
Modified, misplaced, misused, improperly installed or obviously
abused ZEROLITE Components products are not covered by this
warranty.
Based on this warranty, the company MTI DANISMANLIK BILISIM
KOMPOZIT
HAVACILIK MAK. SAN. VE TIC. A.Ş. is not liable for compensation,
especially not for indirect damage caused by accidents, collateral
damage and consequential damage.
LIFELONG CRASH REPLACEMENT
We offer the original owners of ZEROLITE Components products a
lifetime crash replacement program that covers all damages
(optical damages are excluded) outside of the warranty, whether
self-inflicted or third-party caused (product registration required).
In this case we guarantee you a one-time discount of 40% on our
recommended retail price if you decide to buy any new ZEROLITE
Components product in the same product category.
Please note that VAT, packaging, shipping and installation costs
and any import duties are not covered.
INTENDED USE
The intended use of ZEROLITE Components (ROAD BAR & ERGO
BAR) products is approved exclusively for driving on asphalt,
concrete or paved roads and paths, whereby permanent ground
contact of the wheels must be guaranteed.
Not suitable for jumps, riding on a wheel or braking where the rear
wheel loses contact with the ground.
ZEROLITE Components products may only be used within or below
the intended category. Otherwise, the user takes full responsibility.
Damage can lead to failure of the component and thus to serious
injury or even death. Externally damaged or defective components
must not be used under any circumstances and must be replaced
immediately. If you are unsure, contact us or a service center.
WEIGHT LIMIT
The weight limit of the ROAD Bar and the ERGO Bar is directly
proportional to the weight limit of the frame and wheelset those
users have.
SHORTENING CARBON HANDLEBARS
The Road Bar and Ultra Bar must not be shortened or torqued. Doing
so could weaken the component structure, which will affect your
safety and void your warranty.
APPEARANCE
Our components are 100% handmade. Thereby it can come to
different appearances. It makes each component unique and has no
influence on the safety.
