M5Stack M5StickC User manual

M5StickC
Description
What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your
hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source
code & engineering community that will help you maximum your benefit in every step of the developing
Power switch operation
：
Power on ：Long press power button for 2 seconds
Power off ：Short press power button for 6 seconds
Notice:
Baudrate supported by M5StickC: 1200 ~115200, 250K, 500K, 750K, 1500K
Only Orange type is available for now
Notice:
M5StickC only supports WIN10 & Linux & MAC free drive, the rest of the operating system requires users
to install the driver.
Installation steps: 1. Click the link below to download the driver installation package. 2. Connect the
device and open the Computer Device Manager port option. 3. Right click on the unrecognized device
and perform a manual update.
M5Stack Docs
M5StickC is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT
development board.
IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stickC is one of the core devices in M5Stack product series which is built in a continues growing

Driver download Link
Product Features
ESP32 Features
240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
Integrated 520 KB SRAM
Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
Integrated dual mode Bluetooth (classic and BLE)
Hall sensor
32 kHz crystal oscillator
PWM/timer input/output available on every GPIO pin
SD-card interface support
EasyLoader
M5Stack Docs
5V DC power supply
USB Type-C
ESP32-based
Case Material: PC + ABS
4 MByte Flash
6-Axis IMU: MPU6886
Red LED
IR transmitter
Microphone
2 Buttons, LCD(0.96 inch), 1 Reset
2.4G Antenna: Proant 440
80 mAh Lipo Battery
Extendable Socket
Grove Port
Wearable & Wall mounted
Development Platform UIFlow, MicroPython, Arduino
Product Size：48.2mm x 25.5mm x 13.7mm
Product weight：15.1g

1.EasyLoader is a simple and fast program burner. Every produ
of function verification can be performed.(Currently EasyLoader is only available for Windows
OS)
2. After downloading the software, double-click to run the application, connect the M5 device to
the computer through the data cable, select the port parameters, click "Burn" to start burning.
(For M5StickC burning, please Set the baud rate to 750000 or 115200)
Schematic
PinMap
Power structure block diagram
M5Stack Docs

RED LED & IR Transmitter & BUTTON A & BUTTON B
GPIO10 GPIO9 GPIO37 GPIO39
RED LED LED Pin
IR Transmitter Transmitter Pin
BUTTON A Button Pin
BUTTON B Button Pin
TFT LCD
Driver IC ： ST7735S
Resolution ： 80 * 160
ESP32 GPIO15 GPIO13 GPIO23 GPIO18 GPIO5
TFT LCD TFT_MOSI TFT_CLK TFT_DC TFT_RST TFT_CS
GROVE PORT
ESP32 GPIO33 GPIO32 5V GND
GROVE port SCL SDA 5V GND
MIC (SPM1423)
ESP32 GPIO0 GPIO34
MICPHONE SCL SDA
6-Axis posture sensor (SH200Q/MPU6886) & power management IC (AXP192)
ESP32 GPIO22 GPIO21
M5Stack Docs
ESP32

power management IC SCL SDA
AXP192
Microphone RTC TFT backlight TFT IC ESP32/3.3V MPU6886/SH200Q 5V GROVE
LDOio0 LDO1 LDO2 LDO3 DC-DC1 IPSOUT
Include
1x M5StickC
1x USB Type-C(20cm)
Weight and Size
Package size:55mm x 55mm x 20mm
Package weight:33g
Related Link
datasheet
ESP32-PICO
ST7735S
BM8563
MPU6886
SH200Q
AXP192
SPM1423
Version Change
Release Date Product Change
2019.3 Initial public release
2019.8 SH200Q changed to MPU6886
2019.10 Upgrade the bottom and add copper nuts
Example
Arduino
M5StickC facory test code
M5Stack Docs