MAC Panel Dual SCOUT User manual

DETAIL A
Procedure sheet. IN
Creation Date :1/11/2012 Sheet No. of
1
A
91326
Procedure for assembling and mounting a MAC Panel Dual SCOUT Receiver
to two Pickering 40-923-001 PXI Chassis' in a 19" Rack.
You will need :
MAC Panel Tier Dual SCOUT Receiver (# 561605)
MAC Panel Flange Kit x 2 (# 561635)
MAC Panel Lower slide shelf (# 561637)
MAC Panel Upper slide shelf (# 561638)
Pickering 40-923-001 PXI Chassis x 2
#1 & #2 Philips Screwdrivers
Slide shelf assembly instruction (IN91316 available on website)
19" Rack with 12U of clear space
PXI Chassis x 2
(Pickering 40-923-001) Flange kit x 2
(#561635)
Step 1a) Remove feet and handles from both sides
and bottom of the chassis.
Step 1b) Using the screws provided with the flange kit,
Secure both left and right flange plates to the side of the chassis.
* Note the two holes close together go to the bottom *
4
Bottom feet
removed.
Handle removed.
(not visible)
Right flange
plate
Left flange
plate
4 Screws per side
Two holes close together go at bottom
Step 1) Secure flange kits to both chassis.
Flange kits are now properly secured to the PXI Chassis'.
Retain supplied screws for later use.

Procedure sheet. IN
Creation Date :1/11/2012 Sheet No. of
2
Step 2) Mount sliding shelves into 19" Rack.
91326
Lower Slide Shelf
(# 561637) Upper Slide Shelf
(# 561638)
Step 2a) Mount the two slide shelves into the 19" rack using Instruction sheet IN91316 for guidence.
* this is available from the MAC Panel website under P/N's 561265, 561252 & 561253 *
Upper slide shelf #561638
Lower slide shelf #561637
12U clear space in rack
U1
U5
U6
U11
U12
Shelf Assemblies need to be mounted in the shown positions.
Upper assembly should overlap U5 and U6
Lower assembly should overlap U11 and U12
4

Procedure sheet. IN
Creation Date :1/11/2012 Sheet No. of
3
91326
Step 2b) With both shelf assemblies fitted.
Secure the
UPPER chassis assembly into place first.
This can be secured to the shelf via the feet holes
removed in step 1a.
The 4 hole positions in the shelf are shown below.
Step 3) Attach the Dual Tier SCOUT Receiver to the flange plates.
Dual Tier SCOUT Receiver
# 561605
4
Front of
shelf.
12
34
With the upper chassis secured in place repeat Step 2b for the
LOWER chassis assembly.

DETAIL B
Procedure sheet. IN
Creation Date :1/11/2012 Sheet No. of
4
B
91326
Step 3a) Slide both shelf and chassis out of the
rack and using the 6-32UNC countersunk screws
provided with the flange kits, secure the Dual Tier SCOUT Receiver
to the Flange plates.
* TWO PEOPLE REQUIRED TO CARRY OUT THIS OPERATION *
4
3 x 6-32UNC Screw.
(same both sides) (Shelves and rack removed for clarity)
Step 3b) Slide the whole assembly back into the 19" rack
and secure using the long fixing screws in the receiver.
The Dual Tier SCOUT Receiver and both Chassis'
are now accurately aligned and ready for use.