MAC Panel SCOUT User manual

REV.A 092208
SCOUT Receiver
Mounting Instructions
Assembly Document # IN91106
www.macpanel.com
CORPORATE HEADQUARTERS
551 W. Fairfield Rd.
High Point, NC 27263
PH: +1 336.861.3100
FAX: [phone]
[email protected]
MAC PANEL LTD. - EUROPE
Clarence Rd., Bollington
Macclesfield SK 10 5JZ UK
PH: +44 (0) 1625.572133
FAX: [phone]
[email protected]
This document applies to both the SCOUT 21 slot 561000 / NI PXI-1045
and the SCOUT 11 slot 561057 / NI PXI-1042 mounting procedures.

REV.A 092208
Tools Required
#2 Phillips Head Screw Driver
Step 1. Mount right side flange (with notch) to the right side of the empty PXI chassis using
M4F85 screws provided with the 561005 flanges. Repeat on left side.
Step 2. Illustration of completed flanges mounted onto PXI chassis. Notice notch for safety switch
on right side flange.

REV.A 092208
Step 4. Illustration of completed receiver mounted to flanges.
Step 3. Attach the SCOUT receiver to the flanges using (3) three each #632F85 screws on each
side, supplied with the 561005 flanges.