Macrom M-DL4000 User manual

USER MANUAL
M-DL4000
M-DL4000 User manual_ENG.indd 1 08/06/2017 15:41:06

- 2 -
Contents
Safety Precautions ....................................1-2
Produc overview ........................................... 3
Remote cotrol............................................... 3
Basic Operations .......................................... 4
Detect parking brake................................ 4
Mute .......................................................... 4
Power On / Off .......................................... 4
Adjust Volume........................................... 4
Audible Beep Confirmation...................... 4
Playing Source Selection ......................... 4
EQ Menu.................................................... 5
Select Preset Equalizer............................ 5
Adjust EQ Parameters.............................. 5
Adjust FAD BAL ....................................... 5
Radio Mode................................................... 6
Tuner TFT Display .................................... 6
Select Radio as Playing Source ............... 6
Select One Radio Band............................. 6
Tune the radio........................................... 6
Preset Station........................................... 7
Local Seeking ........................................... 7
EQ Selection ............................................. 7
AF Function............................................... 7
TA Function............................................... 7
CT (Clock Time) ........................................ 7
PTY Function............................................. 7
Playback Mode ............................................. 8
Touch Screen Controls ............................ 8
Controlling Playback................................ 8
Connect a USB device .............................. 8
Remove a USB device .............................. 8
Play/Pause................................................ 8
Previous/Next ........................................... 8
Audio playback from USB .....................8-9
Video playback from USB..................10-11
Image playback from USB ..................... 12
Bluetooth Mode .......................................... 11
Pair the Bluetooth-enabled Devices...... 11
Disconnect Bluetooth Device................. 11
Make a Call............................................. 11
Receive a Call ......................................... 12
Adjust Bluetooth Settings ...................... 12
Bluetooth Music Function...................... 12
Settings....................................................... 13
General .................................................. 13
Audio ....................................................... 13
Time ........................................................ 13
Language ................................................ 14
Video........................................................ 14
Volume.................................................... 14
Calibration .............................................. 15
SWC Programmind ................................ 15
Other Modes ............................................... 16
Audio video input .................................... 16
Replace a Fuse....................................... 16
Specifications ........................................17-18
Troubleshooting ......................................... 19
Wire Connections ....................................... 20
M-DL4000 User manual_ENG.indd 2 08/06/2017 15:41:06

- 1 -
Safety Precautions
Never expose this unit, amplifier, and
speakers to moisture or water to prevent
electric sparks or fire.
Please don't change the fuse on the power
cord without professional guidance, using
improper fuse may cause damage to this unit
or even cause fire.
Please contact your nearest dealer if one of
the following symptoms is experienced:
(a). Water or other objects enters the unit.
(b). There is smoke.
(c). Peculiar smell.
Only connect the unit to a 12-volt power
supply with negative grounding.
MUTE
OK
MUTE
OK
Never install this unit where the operation &
condition for safe driving is impaired.
Never use the video display function in the
front when driving to prevent the violation of
laws & regulations and also to reduce the
risk of traffic accident except for using rear
view video camera.
MUTE
OK
MUTE
OK
MUTE
OK
MUTE
OK
Thank you for purchasing this product. Please
read through these operating instructions
so you will know how to operate your model
properly. After you’ve finished reading the
instructions, keep this manual in a safe place
for future reference.
To ensure safe driving, please adjust the
volume to a safe and comfortable level in
case of emergency situations.
M-DL4000 User manual_ENG.indd 1 08/06/2017 15:41:07

- 2 -
1. Never disassemble or adjust the unit without any professional guidance.
For details, please consult any professional car shop / dealer for inquiry.
2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent
to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning
may result in scratching or decoloration to the monitor.
3. If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this
manual. If no relevant information is found, please press the [RESET] key on the front panel to
resume factory default.
4. If you have parked the car in hot or cold weather for a long time, please wait until the
temperature in the car becomes normal before operating the unit.
5. Using the car heater in low temperature environment may result in moisture inside the unit, DO
NOT use the unit in this situation. Eject the disc and wipe off the moisture on the disc. If the unit
still doesn't work after a few hours, please contact the service center.
6. Do not impact the LCD monitor which could cause damage.
7. To prevent damage to the screen, avoid touching it with sharp objects.
8. To provide a clear demonstration and an alternative for easy understanding to the operation of
this unit, graphic illustrations are used.
However, some illustrations are different from the actual images displayed on the screen.
9. Operate the unit correctly according to this manual to prevent unnecessary problem. The
guarantee won't be valid if the problem is caused by inappropriate operation.
Safety Precautions
Note:
The items listed outside of the frame are the commercial products generally sold.
Expanding System
SD Card
Power Amplifier
Rear
Monitor
Rear vision
Monitor
Portable player
(connected via AV Input)
USB
memory
Bluetooth
cellular phone
Expanding audio feautres Expanding visual feautres
VOL
M-DVD6000
USB
AUX
MAP
M-DL4000 User manual_ENG.indd 2 08/06/2017 15:41:07

- 3 -
Front Panel
1. [ ] Button
Turn the unit on.
Press and hold to turn the unit OFF
2. [ ] Button to adjust the brightness of screen.
3. [ ] Menu Button
Press to display the main menu
4. [ ] Button
Increase the volume level.
5. [ ] Button
Decrease the volume level.
Product overview
Notice:
The graphic in this manual is for reference only, and may be different from the actual unit.
3
4
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1. Power & Mute On/Off
2. Fast forward / Station up
3. -
4. Previous / Seek down
5. Play / Pause
6. Stop
7. Fast backward / Station down
8. Preset station (1)
9. Repeat play / Preset station (2)
10. Preset station (5)
11. Preset station (6)
12. Show main menu.
13. Preset station (3)
14. Preset station (4)
15. -
16. Adjust volume level.
17. Next / Seek up
18. Scan play / Preset scan
Auto memory store (long press)
19. Select tuner band.
Remote control
2
1
M-DL4000 User manual_ENG.indd 3 08/06/2017 15:41:07

- 4 -
Detect parking brake
• Connect the cable "BRAKE" to the parking brake switch to view video files on the TFT monitor.
Engage the parking brake for viewing videos.
• When the parking brake is not engaged, the monitor displays "Warning!!!, Video playback is
disabled for your safety. Engage parking brake to watch video.", preventing the driver to watch
content while driving. The rear screens are not interested in this inhibition.
Power On / Off
Press the [ ] button on the front panel to turn the unit ON. The buttons on the front panel light up
and the current mode status appears on LCD.
Press and hold the button to turn OFF the unit.
Volume Adjustment
To increase or decrease the volume level, press the [ ] or [ ] button on the front panel. The
volume range is from “0” to “40”. The TFT screen displays the volume level for 3 seconds.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through the
Setup menu.
Playing Source Selection
Press the [ ] button on the front panel to display the playing source menu.
1. Touch [ ] oppure [ ]to view the previous or next page of playing sources.
2. Playing source icon: touch to access corresponding work mode.
3. Time status.
4. Bluetooth status.
5. Date.
Basic Operations
123
4
1
5
M-DL4000 User manual_ENG.indd 4 08/06/2017 15:41:08

- 5 -
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the
EQ setup interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ Optional ] /
[ Classic ] / [ Rock ] / [ Jazz ] / [ Techno ] / [ Pop ],
and the EQ mode will change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the parameters adjustment bar.
[ User ]: Set the desired audio effect.
[ Flat ]: Select the original audio effect.
[ Loud: On/Off ]: When listening to music at low volumes, this featurewill selectively boost certain
bass and treble frequencies.
Adjust FAD BAL
You can adjust front/back/left/right balance of the speaker and the subwoofer volume to get
balanced listening effect according to the surroundings and your interest.
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the EQ
setup interface will display on the screen.
2. Adjust subwoofer volume
Touch [ ] / [ ] or drag [ ] to adjust subwoofer
volume from -8 to +8.
3. Adjust fader / balance value
Touch [ ] / [ ] / [ ] / [ ] to adjust fader /
balance value from -14 to +14.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
Basic Operations
EQ Menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical
characteristics of your vehicle, which vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.
Notes:
1. The parameters of the EQ modes has been preset and you can not change them besides ‘User’.
2. The EQ mode will change to ‘User’ automatically when you adjust the frequency value under the
modes besides ‘User’.
3. The value of Sub is independent of EQ mode and can be adjusted separately.
M-DL4000 User manual_ENG.indd 5 08/06/2017 15:41:08

- 6 -
Select Radio as Playing Source
Open the Source Menu and then touch [Radio].
Select One Radio Band
Touch the [ ] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and
AM2.
Tune the radio
Auto Tunig
During auto tuning, the frequency will be changed in seek mode.
Touch the [ ] / [ ] icon on the user interface to tune in a higher / lower station.
Note: When a station is received, searching stops and the station is played.
Manual Tuning
Method 1:
Touch and hold [ ] / [ ] icon on the user interface more than 1 second to changed in steps
higher / lower station. Repeat the operation to change step by step.
Method 2:
1. Touch the numeric keypad icon [ ].
Numeric keyboard is displayed, touch number to
input frequency.
2. Touch [ ] to delete the input number step by step.
3. Touch [ OK ] to enter.
Radio Mode
1. Current radio band indicator.
2. Return to home menu.
3. Current station frequency.
4. Preset stations list.
5. Shortcut.
6. Band switch.
7. Seek backward
Tune backward(long press)
8. Enter frequency directly.
9. Seek forward
Tune forward(long press)
10. Opening the options menu.
11. Auto searching.
12. Enter EQ menu.
13. To turn On or Off “Clock Time”
14. Choose local or distant seeking mode.
15. To turn On or Off “TA” function.
16. To show PTY list.
17. To turn On or Off “AF” function.
18. Closing the options menu.
Tuner TFT Display 1
3
4
6 7 8 9
TA
14 15 16 17 18
2
5
10
11
12
13
M-DL4000 User manual_ENG.indd 6 08/06/2017 15:41:08

- 7 -
Radio Mode
Preset Station
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations; the
unit can store 30 stations in total.
Search Stations Automatically
Touch [ ] to search station and store 6 strongest stations in current band automatically.
Manual Store
1. Tune to a station.
2. Touch one of the channels P1 to P6 to save the select band.
Recalling a Station
1. Select a band.
2. Touch an on-screen preset button (P1 to P6) to select the corresponding stored station.
Local Seeking
Touch the [ ] icon and choose the Radio Local or Distance.
When the [ Distance ] icon turns bright, only stations with a strong signal strength will be detected.
Default is “Distance”.
EQ Selection
Press the [ ] icon and enter the EQ setup.
AF Function
Alternative Frequencies Lists are used in conjunction with the PI code (Program Identification
code)to assist automatic tuning.
Using this information, the radio can automatically search out another frequency of the same
station.
Note:
• During auto switching radio frequency, some interference may be heard..
• Turning off AF function can settle this problem.
TA Function
The TA (Traffic Announcement) function lets the unit receive traffic announcements automatically.
The TA function can be activated by a TP (Traffic Program) station broadcasting traffic information.
When TA is activated and a traffic announcement is received, the current playing source will be
overridden by the traffic announcement The unit returns to the original source after the traffic
announcement has been received.
CT (Clock Time)
Some stations broadcast the time and date within the encoded RDS signal. The clock time is
automatically adjusted when ‘CT’ is set to ‘ON’.
PTY Function
PTY is an abbreviation for the type of program defined by a code to define the program being
broadcast (eg news or Rock).
The Options of PTY is displayed on the screen. To see the options PTY, tap the scroll bar and arrows
on the screen.
When an option is selected PTY (eg News), the radio unit, the PTY search available. If the PTY
requested was not found, the unit returns to the original radio frequency.
M-DL4000 User manual_ENG.indd 7 08/06/2017 15:41:08

- 8 -
Touch Screen Controls
The touch key areas for image/video playback are outlined below:
A: Return to the main menu
B: Disc type
C: Play the video and display playback information
D: Time display
E: Display onscreen control menu
Controlling Playback
To access the on-screen controls, touch the screen except upper left corner, and touch again to
cancel display. Touch [ ] to view all function icons.
Connect a USB device
1. Connect an USB device into the rear USB connector.
Play starts automatically.
Remove a USB device
1. Select another source in the main menu.
2. Remove the USB device.
Play/Pause
1. Once USB device is inserted, play starts automatically.
For movie, if a menu appears, press [ ] to start play.
2. To pause, touch [ ].
To resume play, touch [ ].
3. Skip to previous / next track / chapter, press [ ] / [ ] key.
Previous/Next
Touch [ ] / [ ] key on the screen to skip to previous / next track / chapter.
Playback Mode
A B C
E
D
Audio playback from USB
The principles of audio playback (MP3/WMA) from data carriers are identical for all sources.
Select the desired source via the main menu.
The device changes to the desired source and the playback starts.
If the playback does not start with the audio playback,
touch the [ ] icon to change to the folder/file list.
Touch the [ ] icon to display all the folders and
files of the data carrier.
- Or -
Press the [ ] icon to display all the audio files of the
data carrier.
M-DL4000 User manual_ENG.indd 8 08/06/2017 15:41:09