Magellan Outdoors FSMGCB4031 User manual

Camp Kitchen
Please keep this instruction manual for future reference
Instruction Manual
FSMGCB4031
Customer Service: [phone]
Monday thru Friday
8:30am to 5:30pm, EST
(Made in China)

1
Table of Contents
Warnings………………………………………………………………..…2
Parts List..…….…………………………………………………………...3
Care and Maintenance……………………………………………...……4
Assembly Instructions………………………………………………….5-7
Note: Before beginning assembly of product, make sure
all parts are present. Compare parts with package content
list. If any part is missing or damaged do not attempt to
assemble the unit. Contact customer service for
replacement parts.

Warnings
IMPORTANT SAFETY AND TIP INFORM ATI ON
TO MAXIMIZE THE ENJOYMENT OF YOUR PRODUCT PLEASE ASSEMBLE AND USE YOUR PRODUCT
AS SAFELY AS POSSIBLE.
THE PURPOSE OF THE SAFETY ALERT SYMBOL IS TO CALL YOUR ATTENTION TO
POSSIBLE HAZARDS RELATING TO THE USE AND ASSEMBLY OF YOUR PRODUCT.
THE PURPOSE OF THE TIP SYMBOL IS TO CALL YOUR ATTENTION TO SUGGESTIONS
THAT WILL ASSIST YOU IN THE ASSEMBLY/DISASSEMBLY PROCESS AND ENHANCE YOUR
CAMPING EXPERIENCE. WHEN YOU SEE THESE SYMBOLS, PLEASE CLOSELY FOLLOW THE
INFORMATION PROVIDED.
THIS CAMP KITCHEN IS DESIGNED TO BE USED OUTDOORS, AND REQUIRES ADULT ASSEMBLY.
READ INSTRUCTION MANUAL BEFORE INSTALLATION AND/OR USE.
INSPECT BEFORE USE, DO NOT USE IF PARTS ARE LOOSE OR DAMAGED.
KEEP PARTS AND PACKAGING MATERIALS AWAY FROM CHILDREN.THIS PRODUCT IS NOT A
TOY. KEEP IT OUT OF REACH OF CHILDREN.
THIS CAMP KITCHEN SHOULD BE STORED DRY. MAKE SURE THE CAMPING KITCHEN IS
COMPLETELY DRY BEFORE REPACKING.
THERE IS A PINCH HAZARD DURING ASSEMBLY AND DISASSEMBLY OF THE CAMP KITCHEN
FRAME. PLEASE USE CAUTION AT ALL TIMES.
WARNING
2

A Camp Kitchen Case 1
B Main Frame 1
C Folding Wire Shelf 1
D Lantern Holder 2
E Accessory Hanger 1
F Stove Surface Bracket 3
Parts List
3

IMPORTANT NOTES BEFORE YOU BEGIN:
• Inspect before use, do not use if parts are loose or damaged.
• Assemble your Camp Kitchen before camping to become familiar with the assembly.
• Setup is possible for one person, however two people are recommended.
• Select a clean, level area for the campsite free of debris and sharp objects, away from a natural
watercourse.
•Your product must be stored dry. One of the easiest ways to damage your product is storing it
while it is wet. Storing a wet Camp Kitchen as briefly as 24 hours in warm weather could cause
damage to the table surface.
•If you must close camp in the rain, allow it to dry as soon as possible. DO NOT SCRUB THE
TABLE TOP. ALWAYS MAKE SURE CAMP KITCHEN IS COMPLETELY DRY BEFORE REPACKING.
•Do not leave your Camp Kitchen set up for weeks at a time. Exposure to ultraviolet rays from
the sun can damage and /or discolor the Camp Kitchen.
•Clean the tubes with a cloth and lubricate them with a silicone spray to help prevent corrosion
and keep from being gritty.
• Store all the components in the table top case and lock after use.
•Use care when packing all the components back in the case to prevent damage to the Camp
kitchen
4
CARE AND MAINTENANCE:

Assembly Instructions
Step 1:
• Take the main frame (B) out of the
case (A)
• Expand the main frame (B) outward
by pulling on opposite diagonal
corners of the frame until it is fully
extended (Fig. 1).
5
Step 3:
• Rotate the support bars around from
the leg to the top of the frame. Nest
the end of the pole into the plastic
mold located near the middle of the
frame (Fig. 2).
• Fold out the diagonal support bars
and hook the ends to the locking
posts. Secure by tightening the
black knobs (Fig. 3).
• Verify package contents and confirm
all parts are included and
undamaged.
Tip: Do this at home prior to
your first use of the product.
• Select a smooth, level site to put the
frame (B) upright on the ground.
Step 2:
(Fig. 1)
(Fig. 2)
(Fig. 3)

Step 4:
Assembly Instructions
• Fold out the camp kitchen case (A) and
attach onto the main frame (B) (Fig. 4).
This will serve as the table top.
• Connect the 2 lantern holder tubes (D)
and lock them together (Fig. 5). Insert
the whole tube assembly into its slot on
to the main frame.
• Pull the lantern holder hook out from the
tube and fold down (Fig. 6).
Step 5:
6
• Install the folding wire shelf (C) and the
stove surface brackets (F) onto the main
frame (B) by inserting each piece into its
corresponding hole on the frame (Fig. 3).
(Fig. 3)
(Fig. 4)
(Fig. 5) (Fig. 6)
(A)
(D)
(F)
(B)
(C)

Assembly Instructions
Step 6:
7
• Insert the wire accessory hanger
(E) into the corresponding holes
on the table top surface (A)
• The camping kitchen is now fully
assembled (Fig. 7).
Step 7:
(Fig. 7)
• To disassemble the Camp Kitchen,
complete the assembly steps in
reverse order.
• Put all the parts back in the case
in their original configuration,
close and lock.
• Store in a dry location
(E)