Magnavox MBP1200 User guide

HDMI OUT
VIDEO
OUT
AUDIO
OUT
L
R
HDMI OUT
VIDEO
OUT
AUDIO
OUT
L
R
1
NNECTIONS
C
C
O
O
N
N
NE
C
C
T
T
I
I
O
O
N
N
S
AV/SOURCE
Please Wait...
Please Wait..
.
Language
Please select your language for on-screen
display.
English
Español
Français
Initialization
Welcome!
Cancel
Next
This unit is ready for initialization. Please
follow the on-screen instructions.
Quick Start Mode
Would you like to activate the Quick Start Mode?
The unit will start up more quickly, but will consume
more power in standby mode.
On
Off
STANDBY/ON
Back
Back
Iiili i
Initial
ization
en
2
ITIAL SETUP
I
I
N
N
I
T
T
I
I
A
A
LSE
T
T
U
U
P
P
Please locate the input/video button
on TV’s remote control. The button
may vary on the brand and model of
the TV. Once you have located the
button, press until you see the Initial
Setup menu on the screen.
Pow
er
But
ton
Select your language.
HDMI Out
Video & Audio Out
or
HDMI cable (not supplied)
SETUP MANUAL
MBP1200
If you have any questions or issues with our product,please refer to the
“TROUBLESHOOTING” section of this “SETUP MANUAL”, or visit our website for the
Online Owner’s Manual at
www.magnavox.com
. If additional support is required please
contact our Customer Service line at 1-800-605-8610.
*1VMN32273*
© 2011 Funai Electric Co., Ltd.
Printed in China
E5U90UD
1VMN32273
★★★★★
Audio cable
(supplied)
Video cable (supplied)
Connection to the TV
See the Online Owner’s Manual for details:
www.MAGNAVOX.com
Step 1 Please visit website www.MAGNAVOX.com
Step 2 Select Download.
Step 3 Type in the Model # “MBP1200” and click “Search”.
Step 4 Select the Manual, and click on “Download”.
Problem Tip
No power.
•
Check the power cord, if it is properly connected.
•
Tr y another power outlet.
•
Unplug the power cord, and wait for about 5-10 seconds.
Plug it back in and attempt to power on the unit.
No sound or picture.
•
Make sure both the TV and Blu-ray Disc™ player are
Turned On.
•
Confirm the connections to the TV are connected
properly as shown in the connection page in the Online
Owner’s Manual.
•
Check whether the connected TV or another device
supports HDCP. (This unit will not output a video
signal unless the other device supports HDCP.)
No reaction to the
remote control.
•
Reduce the distance to infrared sensor window.
•
Confirm that the player’s power cord is plugged into a
powered outlet.
•
Check the batteries and make sure they are inserted
properly by + or - symbols.
•
Aim the remote at the unit’s remote receiver. Then
press any arrow key and confirm the Power-On
indicator dims and blinks when a remote button is
pushed. Please check IR signal.
No audio / video on
the display device using
HDMI cable.
•
If the unit is connected to a non certified HDMI device,
the audio / video signal will not Output to that device.
•
Make sure the display device is on the correct Input /
video channel.
•
Perform the HDMI hotplug: Disconnecting the HDMI
cable from the display device,Turn On both devices,
and replug the HDMI cable back in.
•
Check with the TV manufacturer, if there are any
software updates available for theTV.
•
Check if the HDMI cable is a certified version.
No high-definition video
signal on the TV screen.
•
Does the disc contain high-definition video? High-definition
video is not available when the disc does not contain it.
•
Does theTV support high-definition video? High-definition
video is not available when theTV does not support it.
No audio signal from
Surround system of the
audio system.
•
Make sure the audio system is turned On.
•
Check that Input mode on the audio system is on the
correct channel.
•
Check if the Surround system is compatible with either
Bitstream or LPCM. If not sure please check the user
manual or contact the Surround manufacturer. Once
confirmed check the setting in the setup menu of the unit.
•
Increase the volume level of the Surround system.
Distorted picture.
•
Sometimes a small amount of picture distortion may
appear.This is not a malfunction.
•
Connect this unit directly to the TV. If the audio /
video cables are connected to a VCR, pictures may be
distorted due to theVCR copyright protection system.
Completely distorted
picture or black / white
picture with
Blu-ray Disc™ / DVD.
•
Make sure the disc is compatible with this unit.
No sound or distorted
sound.
•
Adjust the volume.
•
Check if speakers are connected correctly.
•
Check the HDMI connections.
•
Make sure the HDMI cable is not plugged into the
HDMI-DVITV connector which does not allow audio
to be received by theTV set.
•
Check the settings in “Audio Out” menu.
•
Is the disc a newer title?This problem may be solved by
software update.
Picture freezes
momentarily during
playback.
•
Check the disc for fingerprints / scratches and clean
with a soft cloth wiping from center to outer edge.
•
Clean the disc.
Cannot play back a disc.
•
Make sure that the product supports the disc.
•
Check the region code of the disc.This unit supports
the following region codes.
-
Blu-ray Disc™ :“A”
-
DVD : “ALL” or “1”
•
Clean the disc.
OUBLESHOOTING
T
T
R
R
O
O
U
U
B
B
L
L
E
S
H
H
O
O
O
O
T
T
I
N
G
1
3
6
8
12
5
4
17
18
20
21
25
13*
14
16
22
23
24
11
10
2
199
7*
15
OTE CONTROL
R
R
E
M
O
O
T
T
ECO
N
N
T
T
R
R
O
L
L
(*) The unit can also be Turned On by
pressing these buttons.
1.
STANDBY/ON
.
button
Press toTurn On the unit, or to switch
the unit into STANDBY mode. (To
completely Turn Off the unit, you must
unplug the AC power cord.)
2.
RED / GREEN / BLUE /YELLOW
buttons
Press to activate shortcut keys on
some BD-video functions.
When file list is shown, press to switch
between pages.
3.
TOP MENU button
Blu-ray Disc™:
Press to display the
Top Menu.
DVD:
Press to display the Title Menu.
4.
Î
/
ï
/
Í
/
Æ
buttons
Press to select items or settings.
5.
HOME button
Press to display the home menu.
6.
¢
(REVERSE) button
During playback,press to Fast Reverse
the playback.
7.
Æ
(PLAY) button*
Press to start playback or Resume
playback.
8.
H
(SKIP) button
During playback,press once to return
to the beginning of the current title,
chapter, track or file.
During playback,press twice to return to
the previous title,chapter,track or file.
During the JPEG playback,press to
return to the previous file.
9.
Ê
(STOP) button
Press to Stop playback.
10.
NUMBER buttons
Press to select a chapter during playback.
Press to enter Numbers in the input field.
INSERT BATTERIES
Install 2 AAA (1.5V) batteries
11.
SEARCH button
Press to display the Search Menu.
12.
REPEAT button
Press to select Repeat mode.
13.
OPEN/CLOSE
fl
button*
Press to Open or Close the disc tray.
14.
POP MENU/MENU button
Blu-ray Disc™:
Press to display the Pop Menu.
DVD:
Press to display the Disc Menu.
15.
OK button
Press to confirm or select menu items.
16.
RETURN button
Press to Return to the previously displayed menu or screen function.
17.
∫
(FORWARD) button
During playback,press to Fast Forward the playback.
When playback is in pause, press to Slow Forward the playback.
18.
G
(SKIP) button
During playback,press to Skip to the next chapter, track or file.
When playback is in pause mode, press to Forward the playback picture
by picture.
19.
Δ
(PAUSE) button
Press to Pause playback.
20.
DISPLAY button
Press to display the on-screen Display Menu.
21.
ANGLE button
Press to access various camera Angles on the disc.
Press to rotate the JPEG files clockwise by 90 degrees.
22.
SUBTITLE button
Press to select Subtitles on a disc.
23.
AUDIO button
Press to select the Audio channel (such as Audio languages) on a disc.
24.
MODE button
During playback,press to display the Play Menu.
25.
CLEAR button
Press to Clear the information once entered.
D
Note
•
The Power-On indicator on the front panel dims and flickers when it receives
the IR signal from the remote control.
•
Use the supplied remote control. Remote-control operation on any other
remote control,such as an universal remote control, is not guaranteed.
See the Online Owner’s Manual for details: www.MAGNAVOX.com
ECIFICATIONS
S
P
P
E
E
C
C
IF
I
I
C
C
A
A
T
T
I
O
O
N
N
S
General
Signal system
NTSC Color
Power requirements
120 V AC, 60 Hz
Power consumption
14 W (standby: 0.7 W)
Dimensions
(width x height x depth)
11.1 x 2.2 x 8.3 inches
(280 x 54.5 x 210.5 mm)
Weight
2.43 lbs. (1.1 kg)
Operating temperature
41°F (5°C) to 104°F (40°C)
Operating humidity
Less than 80 % (no condensation)
Connection Specifics
USB input (USB 2.0)
Bus power current: MAX. 500 mA
Audio output (Analog)
(RCA jack x 2)
L/R: 2 Vrms
(output impedance: more than 1kΩ)
Video output (RCA jack x 1)
1Vp-p (75Ω)
HDMI output (HDMI jack x 1)
Digital video: 480p, 720p, 1080i, 1080p,
1080p24 / Digital audio
D
Note
•
The specifications and design of this product are subject to change
without notice.
VICING
S
S
E
E
R
R
V
V
I
C
C
I
N
N
G
G
•
Please refer to relevant topics on “TROUB
LESHOOTING” in the Online
Owner’s Manual before returning the product.
•
If this unit becomes inoperative, do not try to correct the problem by
yourself.There are no user-serviceable parts inside. Eject the disc (if
possible), remove the USB Memory Stick, place the unit into the standby
mode, unplug the power plug, and please contact:
1-800-605-8610
or visit : www.magnavox.com/support
PLIED ACCESSORIES
S
S
U
U
P
P
P
P
L
I
E
E
D
D
A
A
C
C
C
C
E
S
S
S
S
O
O
R
R
I
E
E
S
S
•
Remote Control (NB959UD)
•
Batteries (AAA, 1.5V x 2)
•
Audio / video cables
•
SETUP MANUAL
MAGNAVOX is a registered trademark of Philips Electronics North America
Corporation and is used by Funai Electric Co.Ltd. and Funai Corporation, Inc. under
license from Philips Electronics North America.
For product recycling information, please visit - www.magnavox.com
Click on
E5U90UDMBP1200F7SUv1.indd1E5U90UDMBP1200F7SUv1.indd1 2011/11/2914:07:282011/11/2914:07:28

TED WARRANTY
L
L
I
M
I
T
T
E
E
D
D
W
W
A
A
R
R
R
R
A
A
N
N
T
T
Y
FUNAI CORP. will repair this product, free of charge in the USA in the event of
defect in materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase.Certain
parts are excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of
ninety (90) days from the date of original retail purchase.
Note:Any product sold and identified as refurbished or renewed
carries a ninety (90) days labor and parts limited warranty.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL
PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL
RETAIL PURCHASE WILL BE REQUIREDTOGETHERWITH THE PRODUCT
TO OBTAIN SERVICE UNDERTHIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are
altered,replaced,defaced,missing or if service was attempted by an unauthorized
service center.This limited warranty does not apply to any product not purchased
and used in the United States.
This warranty only covers failures due to defects in material or workmanship
which occur during normal use. It does not cover damage which occurs in
shipment, or failures which are caused by repairs, alterations or products not
supplied by FUNAI CORP., or damage, which results from accident, misuse,
abuse, mishandling, misapplication, alteration, faulty installation, improper
maintenance, commercial use such as hotel,rental or office use of this product,
or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR
THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE,ARE HEREBY DISCLAIMED BY FUNAI AND
ITS REPRESENTATIVES INTHE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY
AN AUTHORIZED SERVICE CENTER.
THISWARRANTY IS ONLYVALIDWHENTHE UNIT IS CARRIED-IN TO AN
AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF
THE ORIGINAL RETAIL PURCHASE RECEIPT.
IF NO PROOF OF
PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED
AND REPAIR COSTSWILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.IF,AT ANY
TIME DURING THE WARRANTY PERIOD,YOU ARE UNABLE TO OBTAIN
SATISFACTIONWITHTHE REPAIR OFTHIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS
PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED
REPAIRS:
To obtain warranty service, you must take the product, or deliver the product
freight prepaid, in either its original packaging or packaging affording an equal
degree of protection,to any AUTHORIZED SERVICE CENTER. FUNAI CORP.
will not reimburse you for any service done by unauthorized service providers
without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for
general service inquiries, please contact us at:
FUNAI SERVICE CORPORATION
Tel: [phone]
www.magnavox.com/support
2200 Spiegel Drive, Groveport, OH 43125
See the Online Owner’s Manual for details: www.MAGNAVOX.com
Y INSTRUCTIONS
S
A
F
F
E
T
T
Y
I
I
N
S
S
T
R
R
U
C
C
T
T
IO
N
S
The model and serial numbers of this unit may be found on the cabinet.You should
record and retain those numbers for future reference. Please refer to the LIMITED
WARRANTY for more information.
Model No.:
Serial No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED
TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The important note and rating are located on the rear or bottom of the cabinet.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings.Install in accordance with
the manufacturer’s instructions.
CCIONES DE SEGURIDAD
I
N
N
S
T
T
R
U
U
CCI
O
O
NESD
E
E
S
E
E
G
U
U
R
I
D
A
A
D
El modelo y el número de serie de esta unidad se pueden encontrar en la caja.Deberá
anotar y guardar el modelo y el número de serie para consultarlos, si los necesita, en
el futuro.
Por favor consulte la LIMITED WARRANTY para mayor información.
Número de modelo:
Número de serie:
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE QUE SE PRODUZCA UN INCENDIO O SE RECIBA UNA
DESCARGA ELÉCTRICA, NO EXPONGA ESTEAPARATOA LA LLUVIA NI A LA HUMEDAD.
NO SE DEBERÁ EXPONER EL APARATO NIA GOTERAS NIA SALPICADURAS,Y NO
DEBERÁ COLOCARSE NINGÚN OBJETO QUE CONTENGA LÍQUIDOS SOBRE EL
APARATO, COMO POR EJEMPLO JARRONES.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVISO:
PARA REDUCIR EL RIESGO DE SUFRIR UNA DESCARGA ELÉCTRICA NO QUITE
LA CUBIERTA (O EL PANEL POSTERIOR). EN EL INTERIOR DEL APARATO NO
HAY PIEZAS QUE DEBA MANIPULAR EL USUARIO. SOLICITE EL SERVICIO DE
REPARACIONESAL PERSONAL DE SERVICIO CUALIFICADO.
Las notas importantes y la calificación se encuentran ubicadas en la parte posterior o
inferior del gabinete.
El símbolo del rayo con punta de flecha,en el interior de un triángulo equilátero,
tiene la finalidad de avisar al usuario de la presencia de“tensión peligrosa” dentro
de la caja del aparato que podría ser de suficiente intensidad como para constituir
un riesgo para las personas en caso de que éstas recibiesen una descarga eléctrica.
El signo de exclamación dentro de un triángulo equilátero tiene la
finalidad de avisar al usuario de la presencia de instrucciones de
utilización y mantenimiento (servicio) en el material impreso que
acompaña al aparato.
Símbolo de CLASE ll (doble aislamiento)
IMPORTANTES INSTRUCCIONES
DE SEGURIDAD
1.
Lea estas instrucciones.
2.
Conserve estas instrucciones.
3.
Preste atención a las advertencias.
4.
Siga todas las instrucciones.
8.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-
type plug.A polarized plug has two blades with one wider than the
other.A grounding type plug has two blades and a third grounding
prong.The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet,consult an
electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus.When a cart is used, use caution when
moving the cart / apparatus combination to avoid
injury from tip-over.
13.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in
the manual.The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
g
Disconnect the mains plug to shut off when find trouble or not in use.The
mains plug shall remain readily operable.
pg yp
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
WARNING:
Batteries (Battery pack or battery installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
,
ENSE
L
L
ICE
N
N
S
S
E
E
This product includes some open source software that is subject to the
GNU General Public License (GPL), GNU Lesser General Public License
(LGPL) and/or copyright licenses, disclaimers and notices. You can confirm
further information about these in the “OSS” section in the setup menu of
this product. If you are interested in obtaining GPL source code used in
this product, please contact
FUNAI SERVICE CORPORATION
2200 Spiegel Drive, Groveport, OH 43125
[email protected]
Do not place the unit on the furniture that is capable of being tilted by a
child and an adult leaning,pulling, standing or climbing on it.A falling unit can
cause serious injury or even death.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a residential installation.This equipment
generates, uses, and can radiate radio frequency energy and,if not installed and used in
accordance with the instructions,may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular installation.If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on,the user is encouraged to try to correct
the interference by one or more of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4.
Consult the dealer or an experienced radio / TV technician for help.
pp
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service
person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are
prohibited.
This item incorporates copy protection technology that is protected by U.S. patents
and other intellectual property rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
This apparatus should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided. Make sure to leave a space of 3.9 inches
(10cm) or more around this apparatus.
®
is a joint program of the U.S.
®
Environmental Protection Agency and the U.S. Department
of Energy helping us all save money and protect the
environment through energy efficient products and
practices.
5.
No utilice este aparato cerca del agua.
6.
Limpie el aparato sólo con un paño seco.
7.
No obstruya ninguna de las ranuras de ventilación.Realice la
instalación según las instrucciones del fabricante.
8.
No instale el equipo cerca de elementos para calefaccionar tales
como radiadores,rejillas de calefacción, estufas eléctricas u otros
aparatos (incluidos amplificadores).
9.
No desarme el dispositivo de seguridad del enchufe polarizado
o con conexión a tierra. Un enchufe polarizado contiene dos
clavijas, una más ancha que otra. Un enchufe con conexión a
tierra contiene dos clavijas y una tercera clavija con conexión
a tierra. La clavija ancha del enchufe polarizado o la clavija de
conexión a tierra representan dispositivos de seguridad. Si el
enchufe del aparato no entra en el tomacorriente, consulte con
un electricista para reemplazar sus antiguos tomacorrientes.
10.
Asegúrese de proteger el cable de alimentación de las pisadas o
torsiones especialmente en la zona de la clavija,en el receptáculo
y en el punto donde el cable sale del aparato.
11.
Utilice únicamente los accesorios que especifica el fabricante.
12.
Utilice únicamente el carro, atril, trípode,soporte o la
mesa que especifica el fabricante o que se vendió
junto con el aparato.Cuando utilice un carro, sea
cuidadoso al trasladar el conjunto carro/aparato para
evitar daños por caídas de objetos.
13.
Desenchufe este aparato si hay tormentas eléctricas o
durante largos períodos de inactividad.
14.
Confíe el servicio técnico sólo a personal calificado. El servicio
técnico es necesario cuando el aparato sufre algún tipo de daño,
por ejemplo cuando se dañan los cables de suministro eléctrico
o la clavija,cuando se derrama líquido o se caen objetos sobre el
aparato, cuando se lo expone a la lluvia o a humedad, cuando no
funciona adecuadamente o cuando se cae.
No coloque la unidad sobre un mueble que pueda volcar si algún niño o
adulto lo inclina, empuja, se coloca encima o trepa por él. La caída de la
unidad puede provocar lesiones graves e incluso la muerte.
pp g
El aparato no debe colocarse en una instalación empotrada (por ejemplo: una
biblioteca o un estante) a menos que cuente con la adecuada ventilación.Asegúrese
de dejar un espacio de 3,9 pulgadas (10 cm), o más, alrededor del aparato.
jp ,pg(),, p
ADEMARK INFORMATION
T
T
R
R
A
A
D
D
E
E
M
M
A
A
RKI
N
N
F
F
O
O
R
R
M
A
T
T
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under
U.S. Patent Nos: 5,956,674; 5,974,380;
6,226,616; 6,487,535; 7,392,195;
7,272,567; 7,333,929; 7,212,872 & other
U.S.and worldwide patents issued
& pending. DTS-HD, the Symbol, &
DTS-HD and the Symbol together
are registered trademarks & DTS-HD
Master Audio | Essential is a trademark
of DTS, Inc. Product includes software.
© DTS, Inc.All Rights Reserved.
HDMI, the HDMI Logo,and High-
Definition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
ION CODES
R
R
E
E
G
G
I
O
O
N
C
C
O
O
D
D
ES
This unit has been designed to play back BD-video with
region “A” and DVD-video with region “1” or “ALL”. You
cannot play back BD-video or DVD-video that are labeled
for other regions. Look for the symbols on your BD-video
or DVD-video. If these region symbols do not appear on
your BD-video or DVD-video, you cannot play back the disc
in this unit. The letter or number inside the globe refers to
region of the world. A BD-video or DVD-video labeled for
a specific region can only be played back in the unit with the
same region code.
BD-video
DVD-video
E5U90UDMBP1200F7SUv1.indd2E5U90UDMBP1200F7SUv1.indd2 2011/11/2914:07:362011/11/2914:07:36