Magnavox MDV437 User manual

MDV437
01-43_MDV437_37_eng.indd 101-43_MDV437_37_eng.indd 1 2007-01-31 4:49:36 PM2007-01-31 4:49:36 PM

English
2
Return your Product Registration Card or register online at
www.magnavox.com/usasupport today to get the very most from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below,
so don't miss out. Complete and return your Product Registration Card at once, or register online at
www.magnavox.com/usasupport to ensure:
For Customer Use
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
Model No. __________________________
Serial No. __________________________
Know these
safetysymbols
This “bolt of lightning” indicates unin-
sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention
to features for which you should read
the enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc élec-
triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Visit our World Wide Web Site at http://www.magnavox.com/usasupport
Congratulations on your purchase,
and welcome to the “family!”
Dear MAGNAVOX product owner:
Thank you for your confidence in
MAGNAVOX.You’ve selected one of the
best-built, best-backed products available
today.We’ll do everything in our power to
keep you happy with your purchase for many
years to come.
As a member of the MAGNAVOX “family,”
you’re entitled to protection by one of the
most comprehensive warranties and out-
standing service networks in the industry.
What’s more, your purchase guarantees
you’ll receive all the information and special
offers for which you qualify, plus easy access
to accessories from our convenient home
shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome -
and thanks for investing in a MAGNAVOX
product.
P.S. To get the most from your MAG-
NAVOX purchase, be sure to complete
and return your Product Registration
Card at once, or register online at:
www.magnavox.com/usasupport
*Proof of Purchase
Returning the enclosed card
guarantees that your date of
purchase will be on file, so no
additional paperwork will be
required from you to obtain war-
ranty service.
*Product Safety
Notification
By registering your product,
you'll receive notification -
directly from the manufacturer
- in the rare case of a product
recall or safety defect.
*Additional Benefits
Registering your product guar-
antees that you'll receive all of
the privileges to which you're
entitled, including special
money-saving offers.
01-43_MDV437_37_eng.indd 201-43_MDV437_37_eng.indd 2 2007-01-31 4:49:43 PM2007-01-31 4:49:43 PM

English
3
Class II equipment symbol
This symbol indicatesthat the unit has
a double insulationsystem
01-43_MDV437_37_eng.indd 301-43_MDV437_37_eng.indd 3 2007-01-31 4:49:44 PM2007-01-31 4:49:44 PM

English
4
Canada
English:
This digital apparatus does not exceed the
Class B limits for radio noise emissions
from digital apparatus as set out in the
Radio Interference Regulations of the
Canadian Department of Communications.
Français:
Cet appareil numérique n’emet pas de
bruits radioélectriques dépassant les limites
applicables aux appareils numériques de
Class B prescrites dans le Règlemenet sur
le Brouillage Radioélectrique édicté par le
Ministère des Communications du Canada.
WARNING
To reduce risk of re or electric shock, do not
expose this appliance to rain or moisture. Use
of controls or adjustments or performance of
procedures other than herein may result in
hazardous radiation exposure.
The set complies with the FCC-Rules, Part 15
and with 21 CFR 1040.10.
ATTENTION
L’utilisation des commandes ou réglages
ou le non-respect des procédures ci-
incluses peuvent se traduire par une
exposition dangereuse à l’irradiation.
ATENCIÓN
El uso de mando o ajustes o la ejecucción
de métodos que no sean los aquí
descritos puede ocasionar peligro de
exposición a radiación.
General Information
Environmental Information
All unnecessary packaging has been
omitted. The packaging has been made
easy to separate into two materials;
cardboard (box) and polyethylene (bags,
protective foam sheet).
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Laser Safety
This unit employs a laser. Due to possible
eye injury, only a qualied service person
should remove the cover or attempt to
service this device.
NOTE:
Pictures shown maybe different
between countries.
CAUTION:
WARNING LOCATION: ON THE
BACKPLATE OF THE SET
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Manufactured under license from
Dolby Laboratories, “Dolby”
and the double-D symbol are
trademarks of Dolby Laboratories.
logo.indd 1 2006-03-21 10:25:36 AM
Copyright Notice: The making of
unauthorized copies of copy-protected
material, including computer programs, les,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offence. This device should not be
used for such purposes.
“ENERGY STAR and
the ENERGY STAR
mark are registered U.S.
marks”
01-43_MDV437_37_eng.indd 401-43_MDV437_37_eng.indd 4 2007-01-31 4:49:44 PM2007-01-31 4:49:44 PM

EnglishFrançaisEspañol
LASER
Type Semiconductor laser
InGaAlP (DVD)
AIGaAs (CD)
Wave length 658 nm (DVD)
790 nm (CD)
Output Power 7.0 mW (DVD)
10.0 mW (VCD/CD)
Beam divergence 60 degrees
For Customer Use:
Read carefully the information located at
the bottom or rear of your DVD Video
player and enter below the Serial No.
Retain this information for future
reference.
Model No. 437
Serial No. ___________________
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Index
English ------------------------------------------6
Español --------------------------------------- 84
Français -------------------------------------- 44
01-43_MDV437_37_eng.indd 501-43_MDV437_37_eng.indd 5 2007-01-31 4:49:45 PM2007-01-31 4:49:45 PM

English
6
Contents
Care and Safety Information
Setup .............................................................................................................................................................8
Cleaning discs .............................................................................................................................................8
General Information
Accessories supplied ................................................................................................................................9
Region codes...............................................................................................................................................9
Connections
Connecting to television.......................................................................................... 10-11
Using Composite Video jacks (CVBS).............................................................................................. 10
Using Component Video jacks (YPbPr)........................................................................................... 10
Using an accessory RF modulator ......................................................................................................11
Connecting the power cord...........................................................................................12
Optional connections
Connecting to a stereo system.....................................................................................13
Stereo system has right/left Audio In jacks ....................................................................................13
Connecting to a digital AV receiver.............................................................................13
Receiver has a PCM, Dolby Digital or MPEG decoder................................................................ 13
Product Overview
Front and Rear Panels....................................................................................................14
Remote Control............................................................................................................. 15
Getting Started
Step 1: Inserting Batteries.............................................................................................16
Using the remote control to operate the system......................................................................... 16
Step 2: Finding your viewing channel...........................................................................16
Step 3: Setting up Progressive Scan feature...............................................................17
Step 4: Selecting the matching color system ............................................................ 18
Step 5: Setting the language .........................................................................................19
On-screen display (OSD) language.................................................................................................... 19
Audio, Subtitle and DVD menu languages....................................................................................... 19
Playback from Disc
Playable discs.................................................................................................................. 20
Supported formats................................................................................................................................. 20
Playback Features
Starting disc playback ................................................................................................... 21
Basic playback controls................................................................................................. 21
Pausing playback...................................................................................................................................... 21
Selecting title/chapter/track ................................................................................................................ 21
Stopping playback................................................................................................................................... 21
Operations for video playback..................................................................................... 22
Using the Disc Menu .............................................................................................................................22
Zooming in ............................................................................................................................................... 22
Resuming playback from the last stopped point............................................................................ 22
Slow Motion............................................................................................................................................. 22
Forward / Reverse Searching .............................................................................................................. 22
Selecting various repeat functions.............................................................................. 23
Repeat play mode................................................................................................................................... 23
Repeating a section within a chapter/track.....................................................................................23
01-43_MDV437_37_eng.indd 601-43_MDV437_37_eng.indd 6 2007-01-31 4:49:45 PM2007-01-31 4:49:45 PM

English
7
Contents
Viewing the disc playback information ............................................................... 24
Title/Chapter/Track selection ............................................................................................................ 24
Time Search ............................................................................................................................................. 24
Angle .......................................................................................................................................................... 24
Special DVD Features ................................................................................................... 25
Playing a Title........................................................................................................................................... 25
Changing the Audio Language............................................................................................................. 25
Subtitles..................................................................................................................................................... 25
Special VCD and SVCD Feature.................................................................................. 25
Playback Control (PBC)........................................................................................................................ 25
Playing MP3/WMA/JPEG/Kodak/Fuji Picture CD................................................26-27
General Operation ................................................................................................................................ 26
Playback selection .................................................................................................................................. 26
Zoom picture (JPEG) ............................................................................................................................ 27
Playback with multi-angles (JPEG)..................................................................................................... 27
DVD Menu Options
Using the Language setup menu ................................................................................. 28
OSD Language......................................................................................................................................... 28
Subtitle / Audio / DVD Menu.............................................................................................................. 28
Using the Video setup menu...................................................................................29-31
Setting the Aspect Ratio ...................................................................................................................... 29
View Mode ............................................................................................................................................... 30
TV System ................................................................................................................................................ 30
Video Out................................................................................................................................................. 30
Smart Picture........................................................................................................................................... 31
Using the Audio setup menu...................................................................................32-33
Digital Output ......................................................................................................................................... 32
Night Mode .............................................................................................................................................. 33
Down Sampling ....................................................................................................................................... 33
Using the Rating setup menu..................................................................................34-35
Rating level settings .........................................................................................................................34-35
Changing the Password......................................................................................................................... 35
Using the Misc (Miscellaneous) setup menu.........................................................36-37
Restoring to the original settings....................................................................................................... 36
Closed Caption....................................................................................................................................... 37
Others
Software upgrade .......................................................................................................... 38
Specications ................................................................................................................. 39
Troubleshooting.......................................................................................................40~41
Glossary........................................................................................................................... 42
Limited Warranty.......................................................................................................... 43
01-43_MDV437_37_eng.indd 701-43_MDV437_37_eng.indd 7 2007-01-31 4:49:45 PM2007-01-31 4:49:45 PM

English
8
Care and Safety Information
DANGER!
High voltage! Do not open the
device. You run the risk of getting
an electric shock.
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualied
personnel.
Setup
Finding a suitable location
– Place the set on a at, hard and stable
surface. Do not place the set on a
carpet.
– Do not put any equipment or heavy
objects on top of the set.
– Do not position the set on top of
other equipment that might heat it up
(such as receiver or amplier).
– Do not put anything under the set
(such as CDs, magazines).
– Install this unit near the AC outlet and
where the AC power plug can be
reached easily.
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent
internal heat build up. Allow at least
10 cm (4.0”) clearance from the rear
and the top of the set and 5cm (2.0”)
from the left and right to prevent
overheating.
10cm (4.0") 10cm (4.0")
5cm (2.0")
5cm (2.0")
Avoid high temperatures, moisture,
water and dust
– Apparatus shall not be exposed to
dripping or splashing.
– Do not place any sources of danger
on the apparatus (such as liquid lled
objects, lighted candles).
Cleaning discs
Some problems occur because the disc
inside the player is dirty (frozen picture,
sound disruptions, picture distortions).
To avoid these problems, discs should be
cleaned on a regular basis.
To clean a disc, use a micro bre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for analog
discs. Since the optical unit (laser) of the
DVD player operates at a higher power
than regular DVD or CD players,
cleaning CDs intended for DVD or CD
players may damage the optical unit
(laser). Therefore, refrain from using a
cleaning CD.
01-43_MDV437_37_eng.indd 801-43_MDV437_37_eng.indd 8 2007-01-31 4:49:45 PM2007-01-31 4:49:45 PM

English
9
General Information
Accessories supplied
ALL
4
Region
U.S.A. and
Canada regions
U.K and
Europe regions
Asia Pacic,
Taiwan, Korea
Australia,
New Zealand,
Latin America
Russia and
India regions
China, Calcos Islands,
Walls and Futuna
Islands
ALL
ALL
5
6
Discs that can
be played
ALL
1
ALL
ALL
2
3
Remote
control and
two AAA
batteries
Region codes
This DVD player is designed to support
the Region Management System. Check
the regional code number on the disc
package. If the number does not match
the player’s region number (see table
below), the player may be unable to
playback the disc.
Tips:
– It may not be possible to play CD-R/RW
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improper formatted disc will not played on
this DVD player.
Audio cable
(white, red)
Video cable
(yellow)
01-43_MDV437_37_eng.indd 901-43_MDV437_37_eng.indd 9 2007-01-31 4:49:45 PM2007-01-31 4:49:45 PM

English
10
IMPORTANT!
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using ComponentVideo jacks
(YPbPr)
AUse the component video cables (red/
blue/green) to connect the DVD player’s
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
BTo hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
CProceed to page 17 for detailed
progressive scan setup.
Connections
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Connecting to television
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
Using CompositeVideo jacks
(CVBS)
AUse the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the television (cable
supplied).
BTo hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
AUDIO OUT
DIGITAL
OUT TV OUT
COAXIAL
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
2 1
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
01-43_MDV437_37_eng.indd 1001-43_MDV437_37_eng.indd 10 2007-01-31 4:49:45 PM2007-01-31 4:49:45 PM

English
11
AUDIO OUT
DIGITAL
OUT TV OUT
COAXIAL
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
1
COMPONENT VIDEO OUT
Connections (continued)
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
IMPORTANT!
– If your television only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer for details
on RF modulator availability and
operations.
Using an accessory RF modulator
AUse the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack on
the RF modulator.
BUse the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the television.
RF coaxial cable to TV
Back of RF Modulator
(example only)
CTo hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD player to the
corresponding AUDIO IN jacks on the
RF modulator (cable supplied).
DConnect the Antenna or Cable TV
service signal to the ANTENNA IN or RF
IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV).
01-43_MDV437_37_eng.indd 1101-43_MDV437_37_eng.indd 11 2007-01-31 4:49:46 PM2007-01-31 4:49:46 PM

English
12
Connections (continued)
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Connecting the power cord
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD player
front panel.
“– – –” may appear on the display
panel.
AUDIO OUT
DIGITAL
OUT TV
O
COAXIAL
~ AC MAINS
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
01-43_MDV437_37_eng.indd 1201-43_MDV437_37_eng.indd 12 2007-01-31 4:49:46 PM2007-01-31 4:49:46 PM

English
13
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatis dischar e ma ca se permanent dama e to the s stem
Connecting to a stereo
system
Receiver has a PCM, Dolby Digital
or MPEG decoder
ASelect one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
BConnect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your receiver (cable not
supplied).
CSet the DVD player’s digital output to
PCM-Only or ALL depending on the
capabilities of your receiver (see page 32
{Digital Output}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
Stereo system has right/ left Audio
In jacks
ASelect one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
BUse the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of the
DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
Connecting to a digital AV
receiver
Optional connections
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
AUDIO OUT
DIGITAL
OUT TV OUT
COAXIAL
AUDIO
IN
STEREO
DIGITAL
COMPONENT VIDEO OUT
AUDIO
IN
DIGITAL
AV Receiver
AUDIO OUT
DIGIT
AL
OUT TV OUT
COAXIAL COMPONENT VIDEO OUT
01-43_MDV437_37_eng.indd 1301-43_MDV437_37_eng.indd 13 2007-01-31 4:49:46 PM2007-01-31 4:49:46 PM

English
14
Product Overview
Front and Rear Panels
AUDIO OUT
DIGITAL
OUT TV OUT
COAXIAL
COMPONENT VIDEO OUT
Mains (AC Power Cord)
– Connect to a standard AC outlet
Audio Out (Left/Right)
– Connect to AUDIO inputs of an
amplier, receiver or stereo
system
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input
of a digital audio equipment
YPbPr (Component Video Out)
– Connect to YPbPr input of a TV
CVBS (TV Out)
– Connect to CVBS Video input
of a TV
STANDBY-ON
– Turns on the player or switches
to standby mode
Disc Tray
OPEN/CLOSEç
– Opens or closes the disc tray.
Display panel
– Shows information about the
current status of the DVD player.
PLAY/PAUSE u
– Starts or interrupts playback.
STOP
– Stops playback
IR Sensor
– Point the remote control towards
this sensor
01-43_MDV437_37_eng.indd 1401-43_MDV437_37_eng.indd 14 2007-01-31 4:49:46 PM2007-01-31 4:49:46 PM

English
15
Product Overview (continued)
Remote Control
SLOW
OPEN/CLOSE
– Opens or closes the disc tray
0-9 numeric key pad
– Selects numbered items in a
menu
RETURN/TITLE
– To go back to previous
menu/ show title menu
DISC MENU
– Enters or exits the disc
contents menu
– Switches on or off the
playback control mode (for
VCD version 2.0 only and
SVCD)
.
– Skip to previous title/
chapter/ track
>
– Skip to next title/ chapter/
track
SUBTITLE
– To access subtitle language
system menu
AUDIO
– Selects an audio language
(DVD/VCD) or an audio
channel
ANGLE
– Selects a DVD camera angle
ZOOM
– Enlarge a picture on the TV
screen
DISPLAY
– Displays information on TV
screen during playback
1
– To switch the DVD player
to standby mode or ON
SEARCH
– To start playback from
designated point
SETUP
– Enters or exits the system
setup menu
   
– Selects an item in the
menu/ fast and slow
forward/backward
OK
– Acknowledge menu
selection
STOP
– Stops playback
uPLAY/PAUSE
– Starts or pauses playback
MUTE
– Disables or enables sound
output
REPEAT
– Selects various repeat
mode
REPEAT A-B
– Repeats playback a specic
section on a disc
SLOW
– Select a slow forward
STEP
– Play the video frame by
frame
01-43_MDV437_37_eng.indd 1501-43_MDV437_37_eng.indd 15 2007-01-31 4:49:46 PM2007-01-31 4:49:46 PM

English
16
Step 1 : Inserting Batteries
AOpen the battery compartment.
BInsert two batteries type R03 or AAA,
following the indications (+ –) inside the
compartment.
CClose the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed of properly.
Using the remote control to
operate the system
AAim the remote control directly at the
remote sensor (IR) on the front panel.
BDo not put any objects between the
remote control and the DVD player
while operating the DVD player.
Step 2 : Finding your viewing
channel
APress STANDBY-ON 2on the DVD
player to turn it on.
BTurn on the TV and set it to the correct
video-in channel. You should see the blue
DVD background screen.
Usually these channel are between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO.
See your TV’s manual for more
details.
Or, you may go to channel 1 on your
TV, then press the Channel down
button repeatedly until you see the
Video In channel.
Or, the TV remote control may have
a button or turn that chooses
different video modes.
Or, set the TV to channel 3 or 4 if
you are using an RF modulator.
CIf you are using external equipment, (such
as audio system or receiver), turn it on
and select the appropriate input source
for the DVD player output. Refer to the
equipment user’s manual for detail.
Getting Started
01-43_MDV437_37_eng.indd 1601-43_MDV437_37_eng.indd 16 2007-01-31 4:49:46 PM2007-01-31 4:49:46 PM

English
17
Getting Started (continued)
Step 3 : Setting up
Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per second than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
– Ensure that you have connected this
DVD player to a progressive scan TV
using the Y Pb Pr connection (see page
10).
– Ensure that you have completed the
basic installation and set-up.
ATurn on your TV and set to interlace
mode (refer to your TV user manual).
BPress STANDBY ON 2on the
remote control to turn on the DVD
player.
CSelect the correct video-in channel.
 The DVD background menu appears.
DPress SETUP.
EPress to select { Video }, then
press .
Language
Video
Audio
Misc
Rating
Aspect Ratio :
View Mode :
TV System :
Video Out :
Smart Picture :
4:3
Auto Fit
NTSC
Component
Personal
Language
Video
Audio
Misc
Rating
Aspect Ratio :
View Mode :
TV System :
Video Out :
Smart Picture :
4:3
Auto Fit
NTSC
Component
Personal
Language
Video
Audio
Misc
Rating
Aspect Ratio :
View Mode :
TV System :
Video Out Interlaced
Smart Picture
P-Scan
4:3
Auto Fit
NTSC
FPress repeatedly to select { Video
Out }, then press .
GSelect { P-Scan }, then press OK to
conrm.
 The menu will appear on the TV.
Activating Progressive Scan
1.Ensure your TV system supports
Progressive Mode
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover
Yes NO
HPress to highlight { Yes } and press
OK to conrm.
 The menu will appear on the TV.
Confirm again to use new setting
Revert to original setting in 14 seconds
Yes NO
IPress to highlight { Yes } and press
OK to conrm.
JTurn on your TV progressive scan mode
(refer to your TV user manual).
 The setup is now completed and you
can start enjoy the high quality
picture.
To deactivate Progressive Scan
manually:
 Wait for 15 seconds for the auto
recovery.
OR
APress OPEN/CLOSE çon the DVD
player to open the disc tray.
BPress numeric keypad ‘1’ on the
remote control.
 The DVD background screen appears.
Tip:
– There are some progressive scan TVs and
High-Denition TVs that are not fully
compatible with this unit, resulting in the
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the DVD player and your TV.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
01-43_MDV437_37_eng.indd 1701-43_MDV437_37_eng.indd 17 2007-01-31 4:49:47 PM2007-01-31 4:49:47 PM

English
18
Getting Started (continued)
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
Step 4 : Selecting the
matching color system
The color system of the DVD player, disc
and TV should match in order for the
disc to play. Before changing the TV
system, determine the color system of
your TV.
Language
Video
Audio
Misc
Rating
Aspect Ratio :
View Mode :
TV System :
Video Out :
Smart Picture :
4:3
Auto Fit
NTSC
Component
Personal
Language
Video
Audio
Misc
Rating
Language
Video
Audio
Misc
Rating
Aspect Ratio :
View Mode :
TV System NTSC
Video Out PAL
Smart Picture Multi
4:3
Auto Fit
APress SETUP.
BPress to select { Video }, then
press .
CPress repeatedly to select { TV
System }, then press .
DUse to select one of the options
below:
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of a NTSC disc and output it
to PAL format.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
ESelect a setting and press OK.
 Follow the instructions show on the
TV to conrm the selection (if any).
Confirm again to use new setting
Revert to original setting in 14 seconds
Yes NO
Changing NTSC to PAL
1.Ensure your TV system supports
PAL Standard
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover
Yes NO
FPress to highlight { Yes } and press
OK to conrm.
To reset to default TV color system:
 Wait for 15 seconds for the auto
recovery.
OR
APress OPEN/CLOSE çon the DVD
player to open the disc tray.
BPress numeric keypad ‘3’ on the
remote control.
 The DVD background menu appears.
Tips:
– Before changing the current TV colour
setting, ensure that your TV supports the
‘selected TV System’.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
01-43_MDV437_37_eng.indd 1801-43_MDV437_37_eng.indd 18 2007-01-31 4:49:47 PM2007-01-31 4:49:47 PM

English
19
Getting Started (continued)
Step 5 : Setting the language
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
On-screen display (OSD) language
Select this to change the language of this
DVD player screen display menu.
The menu language (on-screen display)
for the system will remain as you set it.
Language
Video
Audio
Rating
Misc
Audio
DVD menu
:English
OSD Language English
Subtitle
French
Spanish
APress SETUP.
BPress to select { Language }, then
press .
CPress to select { OSD Language },
then press .
DUse to select a language and press
OK to conrm.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
Audio, Subtitle and DVD menu
languages
You can choose your preferred language
or sound track from audio, subtitles and
DVD menu languages. If the selected
language is not available on the disc, the
disc’s default language will be used
instead.
Language
Video
Audio
Rating
Misc
OSD Language : English
Subtitle : Auto
DVD menu
Audio English
French
Spanish
APress SETUP.
BPress to select { Language }, then
press .
CPress to highlight one of the
options below, then press .
{ Audio }
Select this to change disc sound track
language.
{ Subtitle }
Select this to change the subtitle language.
{ DVD menu }
Select this to change the language of the
disc menu.
DUse to select a language and press
OK to conrm.
ERepeat steps C- Dfor other language
settings.
01-43_MDV437_37_eng.indd 1901-43_MDV437_37_eng.indd 19 2007-01-31 4:49:47 PM2007-01-31 4:49:47 PM

English
20
IMPORTANT!
– If the INVALID KEY appears on
the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
– DVD discs and players are designed
with regional restrictions. Before
playing a disc, make sure the disc is
for the same zone as your player.
Playable discs
Using this DVD player, you can playback
on the following discs:
DVD Video (Digital Versatile
Disc)
DVD±RW (DVD Rewritable)
Audio/Video format or
MP3/WMA/JPEG les.
DVD±R (DVD Recordable)
Audio/Video format or
MP3/WMA/JPEG les.
CD-R (CD-Recordable)
Audio/Video format or
MP3/WMA/JPEG les.
CD-RW (CD-Rewritable)
Audio/Video format or
MP3/WMA/JPEG les.
Audio CD (Compact Disc
Digital Audio)
Video CD
(Formats 1.0, 1.1, 2.0)
Playback from Disc
TIPS: Some discs cannot be played on this DVD player due to the conguration and characteristics of
the disc, or due to the condition of recording and authoring software that was used.
Super Video CD
MP3-Disc
Supported formats
MP3/WMA tracks
– The le extensions has to be ‘.mp3’,
‘.wma’
– JPEG/ISO format
– Maximum 15 characters display.
– Supported sampling frequencies and
corresponding bit-rates;
32kHz 64 – 320 kbps
44.1kHz, 48kHz 80 – 320 kbps
JPEG pictures
– The le extensions has to be ‘.JPG’
and not ‘.JPEG.’
– JPEG/ISO format
– It can only display DCF-standard still
pictures or JPEG pictures such as
TIFF.
Tips:
– Maximum 100 sessions for CD and 10
multi border for DVD are supported.
– For DVD-R and DVD-RW multi border,
only nalized disc are supported.
– For DVD+R and DVD+RW multi border
both nalized and unnalized disc are NOT
supported.
01-43_MDV437_37_eng.indd 2001-43_MDV437_37_eng.indd 20 2007-01-31 4:49:47 PM2007-01-31 4:49:47 PM