Magnum Mx-EBOX User guide

BACnet / IP Gateway
Setup Manual
Mx-EBOX
Revision 1.5
11052018
5675 Hudson Industrial Pkwy, Suite 3
Hudson, Ohio
44056 USA

Contents
What’s in the box? .............................................................. 3
EBOX Device........................................................................ 3
Backplate ............................................................................ 3
Optional Power Supply (upon request).................................. 3
Device Overview .............................................................. 3
LED Overview....................................................................... 3
Device Dimensions .............................................................. 3
Port Overview ...................................................................... 3
What you need before you begin ...................................... 3
Mounting Instructions...................................................... 4
Backplate Mounting............................................................. 4
Connecting Device to Backplate........................................... 4
Configuration................................................................... 5

Hardware Overview
The product package should contain the following items:
• EBOX Device
• Backplate
• 24V Power supply (optional upon request)
Device Overview
• LED Overview & Dimensions
• Port Overview (back of device)
What you need before you begin
• PoE Cable
• 4 screws
• Screwdriver
• airConfig Software (http://download.magnum-innovations.net)
EBOX Device Device Backplate
Update Indicator LED
Power Indicator LED
EnOcean Indicator LED
5.10
5.05
1.24
Network Indicator LED
5.10”
5.10
5.05
1.24
1.24”
Available port for
external antenna
5.05”
LAN(POE) Cable Port
24V Power Port
(Only applicable with use of optional 24V power supply)
3

Mounting Instructions
• Screw backplate to wall or ceiling
NOTE: Optimal mounting is at or below ceiling height and in conditioned environment.
NOTE: Range can vary greatly based on building materials, device positioning, interferance, etc.
Reference the EnOcean Range Planning Guide prior to installation.
• Attach device to backplate by aligning tabs and twisting / locking into place (see below)
4

5
Configuration Process
• Download and install airConfig (http://download.magnum-innovations.net)
- Select USB port with USB-transceiver or network card.
- The eBox may be configured without the USB-Tranceiver when it can be reached on the network.
- The eBox factory default is DHCP, so it will receive and IP Address if a DHCP server is available.
- If your computer running airConfig is on the network, you will be able to configure the device without the USB-transceiver.

Configuration Process
• Please find the airConfig panel overview below.
Drivers for smart devices
Smart sensor information Debug output
Sensor information
Sensors in radio range
Queried smart devices
Main configuration panel
Cloud connection icon
6

Configuration Process
Radio query
(with EnOcean USB-Transceiver)
IP query when IP address is
unknown
(does not require USB-Transceiver)
7
• If airConfig is started without the USB-Transceiver, it will identify EBOXES on the same network automatically.
The EBOXES will not need to be queried.

Configuration Process
Network Settings
• DHCP
• WLAN
• IP Address
• MAC Address of the EBOX
Active TCP/IP Connection
• Without an active connection, only
the network settings can be adjusted.
• airConfig requires a network connection
to the EBOX for full configuration.
Control / Security
• Reboot - Reboots the EBOX
• Reset - Factory reset that deletes all current configuration as well as inputs and outputs
• Change ID - Changes the Base ID of the radio Chip. CAN ONLY BE DONE 10 TIMES!
• EDE - See page 14
• Key - Configuration keys to lock the device.
8

Configuration Process
Information on the radio chip of
the EBOX
• XML and Firmware Version (1)
• BACnet Location
•BACnet ID and port
• XML Type (2)
• Firmware Update
The EBOX can automatically check for
new firmware. You can specify the
frequency of how often the EBOX
check for new firmware. This feature
requires internet access for the EBOX.
9
(1) Actual firmware version of the EBOX and XML file. airConfig will prompt if there is a new firmware
version available. In a case where the EBOX has direct internet access, it will also have a BACnet
point that indicates a new firmware’s availability.
The XML file contains all EnOcean profiles and is updated regularly.
(2) EBOX points are created based on the XML file. The standard XML file shows temperature values
in °C. This can be changed to °F. Since all sensors send in °C, this is the recommended unit.

Configuration Process
FDR Settings
10
FDR Settings - In a case where a BBMD server is present on the network, the EBOX can be configured as a
foreign device.
The EBOX is NOT a BBMD server!