Magtec MT854 User manual

1
─4 Channel DVR ─
User Manual
MT854
This document contains preliminary information and subject to change without notice.

2
This symbol is intended to
alert the user to the presence
of unprotected “Dangerous
voltage" within the product's
enclosure that may be strong
enough to cause a risk of
electric shock.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
NOTE: This equipment has been tested
and found to comply with the limits for a
class digital device, pursuant to part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference
in which case the user will be required to
correct the interference at his own expense.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.

MAGTEC MT854 4 channel DVR User Manual V1.0 3
Table of Contents
CHAPTER 1 PACKING DETAIL AND INSTALLATION _____________________ 6
1-1 PACKING ___________________________________________________ 6
1-2 Hard Disk Installation ________________________________________ 7
CHAPTER 2 PANEL LOCATION ________________________________________ 9
2-1 FRONT PANEL CONTROLS ___________________________________ 9
2-2 8CH REAR PANEL CONNECTORS ____________________________ 10
2-3 4CH REAR PANEL CONNECTORS ____________________________ 11
CHAPTER 3 LIVE, PLAYBACK AND PTZ OPERATIONS _________________ 12
3-1 LIVE Mode_________________________________________________ 12
3-2 PLAYBACK Mode___________________________________________ 15
3-3 PTZ Mode _________________________________________________ 17
CHAPTER 4 MAIN MENU SETUP ____________________________________ 18
4-1 RECORD SETUP ___________________________________________ 19
4-1.1 Quality & Frame Rate Setup ____________________________ 20
4-2 EVENT SETUP _____________________________________________ 20
4-2.1 MOTION SETUP _______________________________________ 21
4-2.1.1 MOTION AREA SETUP_____________________________ 21
4-3 SCHEDULE SETUP _________________________________________ 22
4-3.1 Schedule Record Setup ________________________________ 23
4-3.2 Holiday Setup _________________________________________ 23
4-4 CAMERA SETUP ___________________________________________ 24
4-5 ACCOUNT SETUP __________________________________________ 25
4-5.1 Permission Setup______________________________________ 25
4-5.2 User Picture Setup ____________________________________ 26
4-6 NETWORKING SETUP_______________________________________ 26
4-6.1 NETWORKING SETUP __________________________________ 27
4-6.1.1 DHCP ___________________________________________ 27
4-6.1.2 LAN_____________________________________________ 27
4-6.1.3 ADSL____________________________________________ 28
4-6.1.4 3G ______________________________________________ 28
4-6.2 HTTP Setup___________________________________________ 29
4-6.3 DDNS Setup __________________________________________ 30
4-6.4 Mail Setup ____________________________________________ 31
4-7 PTZ & RS485 SETUP _______________________________________ 32
4-8 SYSTEM SETUP____________________________________________ 33
4-8.1 DISPLAY SETUP_______________________________________ 33
4-8.2 DATE/TIME SETUP _____________________________________ 34
4-8.2.1 CHANGE DATE & TIME____________________________ 35
4-8.2.2 TIME ZONE AND DAYLIGHT SAVING TIME SETUP____ 35
4-8.2.3 INTERNET TIME SETUP ___________________________ 36
4-8.3 DEVICE SETUP________________________________________ 36
4-9 UTILITY SETUP ____________________________________________ 38
4-10 DIAGNOSTIC______________________________________________ 39
CHAPTER 5 BACKUP & SEARCH____________________________________ 40
5-1 BACKUP SETUP____________________________________________ 40
5-2 SEARCH SETUP____________________________________________ 43
5-2.1 EVENT SEARCH_______________________________________ 43
5-2.1.1 CRITERIA SETUP FOR EVENT SEARCH _____________ 44
5-2.2 TIME SEARCH_________________________________________ 45

MAGTEC MT854 4 channel DVR User Manual V1.0 4
CHAPTER 6 Remote Software Installation and Setup ____________________ 46
6-1 AP Software Installation and instruction ______________________ 46
6-2 How to do remote monitoring through IE _____________________ 48
6-3 How to do remote monitoring through JPEG VIEWER(Only Monitor
Function) _____________________________________________________ 49
6-4 AP Software Operation______________________________________ 51
CHAPTER 7 SPECIFICAITONS _______________________________________ 52
CHAPTER 8 MOBILE APPLICATION INSTALLATION AND USAGE__________ 54
8-1 Mobile Application Installation and Operation for Symbian ______ 54
8-1.1 Mobile Application Installation___________________________ 54
8-1.2 Mobile Application Operation____________________________ 55
8-1.2.1 Add New Login DVR ______________________________ 55
8-1.2.2 Logging Onto the DVR ____________________________ 55
8-1.2.3 Modify the Login Information of DVR _______________ 56
8-1.2.4 Delete the Login Information of DVR________________ 56
8-1.3 Live Monitoring Operation ______________________________ 56
8-1.3.1 Scroll the Image__________________________________ 57
8-1.3.2 Image Quality Setup ______________________________ 57
8-1.3.3 Channel Display __________________________________ 57
8-1.3.4 Size of Image ____________________________________ 58
8-1.3.5 Rotate the image _________________________________ 58
8-1.3.6 Alarm ___________________________________________ 58
8-2 Mobile Application Installation and Operation for Windows Mobile59
8-2.1 Mobile Application Installation___________________________ 59
8-2.2 Mobile Application Operation____________________________ 60
8-2.3 Operation under the LIVE monitoring.____________________ 61
8-3 Google Android Phone OS application and operation___________ 62
8-4 Blackberry Operation System Software Installation and Operation 65
8-4-1 Software installation ___________________________________ 65
8-4.2 Application Software Operation__________________________ 68
8-4.2.1 Add new log-in DVR ______________________________ 68
8-4.2.2 Log in onto the DVR______________________________ 68
8-4.2.3 Modify the Login Information of DVR _______________ 69
8-4.2.4 Delete DVR Existing Record (Connection Information)_ 69
8-4.3 Live Image Operation __________________________________ 69
8-4.3.3 Image Rotation ___________________________________ 70
8-5 iPhone Software installation and operation ____________________ 71
8-5.1 iTune software installation and registration _______________ 71
8-5.2 “scdvr” software installation ( From iTunes ) _____________ 75
8-5.3 “scdvr” software installation ( From App Store )_________ 77
8-5.4 How to operate “ScDvr” program. _______________________ 80
8-5.4.1 Add new DVR information._________________________ 80
8-5.4.2 How to log in DVR._______________________________ 81
8-5.4.3 How to change DVR’s information. _________________ 81
8-5.5 How to use ScDvr to Live monitor.______________________ 82
8.5.5.1 Live display ______________________________________ 82
8.5.5.2 Rotate the display ________________________________ 82
CHAPTER 9 CMS INSTALLATION AND USAGE GUIDE___________________ 83
9-1 CMS Installation____________________________________________ 83
9-2 CMS LOGIN AND ENVIRONMENT_____________________________ 85
9-3 DVRs, Groups & Events_____________________________________ 87
9-3.1 View DVR ∕ Group List _________________________________ 87
9-3.2 View Event Logs ______________________________________ 88
9-4 Local PC Information and Control ____________________________ 88

MAGTEC MT854 4 channel DVR User Manual V1.0 5
9-5 Main Display_______________________________________________ 89
9-5.1 Audio Control _________________________________________ 89
9-5.2 eMAP Display _________________________________________ 90
9-5.3 PTZ Control___________________________________________ 91
9-6 Operation Bar______________________________________________ 92
9-6.1 User administration ____________________________________ 93
9-6.2 DVR Administration ____________________________________ 94
9-6.3 Group Administration __________________________________ 94
9-6.4 eMap Administration ___________________________________ 96
9-6.5 Remote Play __________________________________________ 98
9-6.6 HDD Playback_________________________________________ 99
9-6.7 File Playback_________________________________________ 100
9-6.8 Event Playback_______________________________________ 101
9-6.9 Snapshot Data _______________________________________ 101
9-6.10 Recording Data______________________________________ 102
APPENDIXⅠI-DVR.NET REGISTRATION ______________________________ 103
APPENDIXⅡez-dns REGISTRATION _________________________________ 105
APPENDIXⅢRemote Monitoring IE ActiveX Control Installation Instruction___ 108

MAGTEC MT854 4 channel DVR User Manual V1.0 6
CHAPTER 1 PACKING DETAIL AND INSTALLATION
1-1 PACKING
1. DVR
2.QuickStart 3.IRRemoteControl 4.SATACord1pcs
5.CD 6.Screwsx4 7.PowerAdaptor
Note: Standard shipping products include neither HDD nor DVD R/W

MAGTEC MT854 4 channel DVR User Manual V1.0 7
1-2 Hard Disk Installation
Step１)：Take out the screws as pictures show。
Back panel 3 screws
Left 1 screw
Right 1 screw
Step 2 ) ：Open the cover follow the arrow direction。

MAGTEC MT854 4 channel DVR User Manual V1.0 8
Step３)：Connect SATA & Power wire to Hard Disk and put it on right position of
the bottom case。
Step４)：Fix the Hard Disk with four screws on the bottom case as the picture indicated。
Step５)：Put the cover back and fix it with 5 screws as Step 1 indicated.
Note: After installation, please initialize Hard Disk before starting to record. For more detailed
information, please check out User Manual 4-9 System Tools for reference.

MAGTEC MT854 4 channel DVR User Manual V1.0 9
CHAPTER 2 PANEL LOCATION
2-1 FRONT PANEL CONTROLS
①②③④⑤⑥⑦⑧
⑨⑩⑪⑫⑬
①REC Start or stop recording.
②PLAY Play back in normal speed.
③T-SRH Display the search menu.
④USB 2.0 Port Port for USB external devices.
⑤LED Display
(From left to right)
Power: Power is on.
HDD: Hard disk is in use.
LAN: Connected to the internet (in red): Remote user logged in.
REC: Recording.
PLAY: Pla
y
in
g
back.
⑥IR Sensor Input sensor for the remote control.
⑦/ In SETUP mode, press to move cursor down. In PLAYBACK mode, press
to stop playing back.
/ SLOW In SETUP mode, press to move cursor up. In PLAYBACK mode, press to
slow down.
/ In SETUP mode, press to increase value. In PLAYBACK mode press to
play forwards.
/ In SETUP mode, press to reduce value. In PLAYBACK mode, press to
play rewind.
⑧ENTER/MODE In SETUP mode, press to enter values. In PLAYBACK mode, switch
between full, quad, 9-channel, 16-channel display in order.
⑨In LIVE or PLAYBACK mode, switch to 4-channel display。
⑩In LIVE or PLAYBACK mode, switch to CH1。
⑪In LIVE or PLAYBACK mode, switch to CH2。
⑫In LIVE or PLAYBACK mode, switch to CH3。
⑬In LIVE or PLAYBACK mode, switch to CH4。
⑭PIP In LIVE mode, display with picture in picture format.
⑮ZOOM In LIVE or PLAYBACK mode, enlarge the display of a channel.
⑯MUTE Enable / Disable Key Tone.
⑰BACKUP/ESC In LIVE mode, press to display the BACKUP menu. In SETUP mode,
press to return to previous page.
⑱MENU / II In LIVE mode, press to display menu. In PLAYBACK mode, press to pause
playback.
⑭
⑮
⑯
⑰
⑱

MAGTEC MT854 4 channel DVR User Manual V1.0 10
2-2 8CH REAR PANEL CONNECTORS
①④⑤⑧
②③ ⑥ ⑦⑨
①VGA VGA port
②DC 12V DC 12V power jack
③MAIN/SPOT monitor MAIN/SPOT monitor BNC Video output
④VIDEO IN For cameras BNC input ，8 ports
⑤AUDIO IN RCA input( For CH1)
⑥AUDIO OUT RCA output ( For CH1)
⑦RS485 RS-485 for PTZ
⑧LAN Network port
⑨USB 2.0 For mouse