Majestic Pet Small Luxe Cat Tree User manual

C
A
B
D
E
F
SMALL Luxe cat tree
2 pieces
1 piece
1 piece
1 piece
1 piece
H
G
I
J
K
L
M
N
P
O
Q
T
S
R
1 piece
4 pieces
4 pieces
8 piece
4 piece
All Tools
Included
2 pieces
2 pieces
1 piece
For parts or assembly issues, please contact
our customer service department.
1(800) 692-2199 www.majesticpet.com
[email protected]
35CM
M10X50
M8X35
M6X15
®
®
Panels
Platform
(no threaded
holes)
1 piece
Panel with
large hole
Base
Platform
Sisal Post
Triangle
Supports
Bolt
Round Headed
Screw
Flat Headed
Screw
2 pieces
Bolt
Screw
Self-drilling
Screws
2 pieces
Screw
4 pieces
Rubber Feet
1 piece
Sisal Pad
1 piece
Cushion Pad
Metal Clasp
& Rope Toy
Platform
(3 non
threaded holes)
Platform
(Large hole
with 2 non
threaded holes) M4X12
M4X12
M4X18
M4X30

1Lay both (A) panels down with grooves facing up.
Use bolts (I) to attach (H) triangle supports to
holes on (A) panel.
2On one (A) panel, place (B) platform into top
groove. Align hole over (H) and screw bolt (I) to
secure.
4
3
Place platform (C) into the next groove with the
circular hole under the square opening on
platform (B). Secure to support (H) with bolt (I).
Stand cat tree with platform (B) on the ground.
Slide (D) platform into the third groove. Slide (E)
platform into the vertical grooves on the (A) panels.
Align second panel (A) over platforms (B) & (C)
and push into the grooves. Use (I) bolts to secure
supports (H) to the platforms.
D
I
E
B
C
H
I
I
H
A
H
I
I
H
A
B
C
A
A
AI
I
I

Screw (G) sisal post into platform (C) with (J) bolt.
Tighten with tool.
Place (F) base upside down with the grooves
tting onto panels (A) and the large hole aligned
over (G) post. Secure base (F) to panels (A) with
screws (L).
6
7
5
Secure rubber feet (Q) onto the outer holes on (F)
base with (K) screws. Use (J) bolt to secure post
(G) to (F) base.
D
B
C
A
D
B
C
A
D
B
C
A
G
JQ
K K
KK
QQQ
J
L
L
L
L
G
F
G

8
9
Tie a knot high on rope (O). Lay down between two
holes on platform (B). Place metal piece (O) over
the end of the rope and secure with screws (N).
Turn cat tree right side up. Hold sisal pad (R)
against panel (A) ush against base (F). Use (M)
screws to attach (R) sisal pad to (A) panel.
Align (S) cushion over groove into (B) platform .
screw (P) bolt through bottom up into (B) platform.
10
TA-DAH!
A
WARNING: For pets only. Keep out of reach of children.
Pets should be supervised when using this product. Remove
from pet if any part becomes loose or detached. Do not use or
store near heat or flame. Remove all packaging and dispose
of properly.
Revised 2/9/17
A
O
N
P
M
M
R