Majestic L195DA User manual

USER’S MANUAL
LED TV
INSTRUCTION MANUAL
Model:L195DA

IMPORTANT SAFETY INSTRUCTIONS
Safety Information
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacture’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized
plug has two blades with one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus has
been exposed to rain or moisture, does not operate normally, or has been
dropped.
CAUTION: These servicing instructions are for use by qualified service personnel
only. To reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
WARNING：To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture. The apparatus shall not be exposed to dripping or splashing and that
objects filled with liquids, such as vases, shall not be placed on apparatus.
WARNING: The mains plug is used as disconnect device, the disconnect device shall
remain readily operable.
- This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as
there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the appliance.
Apparatus with class I construction shall be connected to a mains socket
outlet with a protective earthing connection.
1

Important Safety Precautions
Do not place the power cord or other cables
across a walkway in case it is trampled on. Do
not overload the power cord or power socket.
When the power plug is used to disconnect and
connect the device, it should easily go into the
power source.
Do not place the LED TV on an unstable
surface.
Do not disassemble the back cover, as it
contains high voltages inside and will cause
electric shock. Only qualified professionals
s ho u ld c o n d u c t in t e r n a l ad j u s t m e n t s ,
maintenance, and checks.
The TV set should not be subjected to
water droplets, vapor, or splash. This
equipment should not be placed on objects
filled with liquids. Do not place flame
sources, such as lit candles, on or near the
LED TV. Please, pull out the power plug
and contact after sales support if there are
abnormal objects or water in the TV.
Pull out the power cord and antenna cable
during electrical storms so the LED TV is not
damaged by electrical surges. Keep all
people away from the antenna cable during
electrical storms.
Important Safety Precautions
Please, immediately pull out the AC power
plug
from adapter if there is an abnormal sound or
smell or the LED TV has sound but no picture,
and contact after sales support.
The LED TV should be kept free from rain,
moisture and dust to prevent electrical
shock and
short circuits. Do not cover the ventilation
openings with table clothes, curtains,
newspapers, etc.
The LED TV should be kept from high
temperature heating sources or direct
sunlight. Good ventilation is required.
Allow 10 cm. between the LED TV and
other appliances or built-in cabinet walls.
When you wipe the front cabinet, please
make sure the power plug is pulled out and
use a soft, dry, lint-free cloth and handle it
with care. Do not repeatedly wipe the panel,
nor scrape, tap or strike the panel with a hard
object.
Do not wipe the LED TV with any petrol,
chemical or alcohol based solvents as it
will lead to product damage of the panel
and cabinet.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
2 3

Content
1. TV Controls
Important safety Instruction
2. Installation
Wall-mounting
NOTE:
POWER
SOURCE MENU
VOL+VOL-
CH+CH-
1. After you load a disc, press to play the disc, and press twice to pause.
2. Press the button when the power is on the disc will eject, Press the button again to load the
disc automatically.
3. MENU - This button activates the OSD menu. If a sub-menu is active, pressing this button will return
the selection to the previous menu level.
4. SOURCE - This button switches between all the different sources of the TV. When the OSD is active,
this button acts as the enter button and confirms the menu selection.
5. CH(-) - This button performs the channel down function. If the OSD menu is active, this button
functions as down control for the menu.
6. CH(+) - This button performs the channel up function. If the OSD menu is active, this button functions
as up control for the menu.
7. VOL(-) - This button decreases the TV’s volume. If the On Screen Display(OSD) menu is active,
pressing this button will move the selection to the left.
8. VOL(+) - This button increases the TV’s volume. If the OSD menu is active, pressing this button will
move the selection to the right.
9. POWER - Turn on the TV by pressing the button once. Press the button again to turn off the TV.
4 5
TV Controls
TV Inputs and Outputs
Remote Control
5
11-14
OSD MENU OPERATION
Sound
Time
Lock
Option
PVR
MEDIA OPERATION
Built-in DVD Player Operation
22
23
24
25
26
29-34
Cleaning and Maintenance
Troubleshooting
35
36-37
38
Specifications
Important Safety Instructions
Main Menu 15-20
6
TV StandAssembly 7
SYSTEM CONNECTIONS
AV Input
YPbPr Component Input
USB Input
8
8
9
OPTICAL Output
9
Antenna Connection 11
HDMI2(ARC/MMMI) Input
10
SCART Input
10
Picture 21
27-28

TV Inputs & Outputs
6 7
TV StandAssembly
Screw Screw hole A
Screw hole B
Instruction:
1.Place the TV unit on a flat and clean table.
2.Insert stand hold into the stand, Fix stand by 2 pcs screws via screw hole Band A.
HDMI1 HDMI2
(ARC/MMMI)
Common lnterface
MINI-YPbPr
IN
EARPHONE
OUT
MINI-AV
IN
1 2 3 4 5 6 7
8 9 10 11 12 13
1. POWER (DC 12V) input
2. USB2/1: USB/Multimedia input.
3. L/R: Connect to the audio output jacks on your amplifier/home theater.
SCART: Connecting for SCART signal.4.
DVB-S2: Connected to external SATELLITE.5.
6. DVB-T2: Connected to external antenna.
7. OPTICAL: Digital Audio output for Surround Sound amplifiers and other devices.
8. HDMI1 Input: HDMI in.
9. HDMI2(ARC/MMMI) Input: HDMI in.
11.MINI YPbPr: Connecting for the Y/Pb/Pr Input in Component mode.
10.CI: Used to insert the CI card.
12.MINI AV: Connecting for VIDEO signal input in Composite mode.
13.EARPHONE OUT: Output for headphones or head units such as Majestic Head Units with
TV input.
Rear Bottom
Rear Side
OPTICAL
DVB-T2
DVB-S2
SCART
L R
AUDIO
OUT
DC 12V
USB2
USB1

8 9
System Connection
4. YPbPr COMPONENT INPUT
Video component input: Use the SOURCE button on the remote control to select YPbPr.
This input consists of both Video (Green/Blue/Red) and Audio (Red/White)
System Connection
3. HDMI2(ARC/MMMI) INPUT
Allows you to connect your Android or iOS phone or Tablet to display the mobile
device on the TV Screen.
NOTE: Please, make sure the inputs and outputs have firm connections before
connecting power.
2. SCART INPUT
Use the SOURCE button on the remote controller to select SCART.
DVD or VCR back
DVD or VCR
HDMI1 HDM I2
(ARC/MM MI)
Common ln terface
MINI-YP bPr
IN
EARPHON E
OUT
MINI-AV
IN
OPTICAL
DVB- T2
DVB- S2
SCART
L R
AUDI O
OUT
DC 12V
USB2
USB1
1. COMPOSITE AV INPUT
Audio/video input: Use the SOURCE button to select AV on the remote control.
HDMI1 HDM I2
(ARC/MM MI)
Common ln terface
MINI-YP bPr
IN
EARPHON E
OUT
MINI-AV
IN
OPTICAL
DVB- T2
DVB- S2
SCART
L R
AUDI O
OUT
DC 12V
USB2
USB1
HDMI1 HDM I2
(ARC/MM MI)
Common ln terface
MINI-YP bPr
IN
EARPHON E
OUT
MINI-AV
IN
OPTICAL
DVB- T2
DVB- S2
SCART
L R
AUDI O
OUT
DC 12V
USB2
USB1
HDMI1 HDM I2
(ARC/MM MI)
Common ln terface
MINI-YP bPr
IN
EARPHON E
OUT
MINI-AV
IN
OPTICAL
DVB- T2
DVB- S2
SCART
L R
AUDI O
OUT
DC 12V
USB2
USB1

11
Remote Control
7. Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly.
75ohm coaxial cable
Antenna cable
Antenna lead with 75 ohm male PAL Connector
- Batteries should not be exposed to excessive heat such as direct
sunlight, fire or the like.
- If not being used for a period of time, please remove the batteries
from the remote in case of leakage.
- Do not mix old & new batteries together.
Installing Batteries
1Open the battery compartment
cover on the back of the remote.
2Insert two 1.5V AAA size batteries
using the correct polarity as shown.
Don’t mix old or used batteries with.
3Replace the cover.
Battery
Cover
2 x size AAA 1.5V
Battery
Cover
System Connection
new ones..
To use the remote control, point
it towards the remote sensor at
the front of the television. The
remote control has a range of up
to approximately seven meters
from the TV at an angle of up to
60 degrees.
10
System Connection
5. OPTICAL OUTPUT
Allows connection of Digital audio systems and Surround Sound.
6. USB INPUT
Use the SOURCE button on the remote controller to select Media.
USB memory
OPTICAL Cable (Not supplied)
OPTICAL
HDMI1 HDM I2
(ARC/MM MI)
Common ln terface
MINI-YP bPr
IN
EARPHON E
OUT
MINI-AV
IN
OPTICAL
DVB- T2
DVB- S2
SCART
L R
AUDI O
OUT
DC 12V
USB2
USB1
HDMI1 HDM I2
(ARC/MM MI)
Common ln terface
MINI-YP bPr
IN
EARPHON E
OUT
MINI-AV
IN
OPTICAL
DVB- T2
DVB- S2
SCART
L R
AUDI O
OUT
DC 12V
USB2
USB1

12 13
Remote-Control Unit
P.MODE S.MODE AUTO
DISPLAY SOURCE
EXIT MENU
AUDIO
REC.MENU
POWER MUTE
FAV EPG
HOLD
SUBTITLE
INDEX
REVEAL TEXT
SUBPAGE SIZE
REC
OK
SCAN
TIME SHIFT
ASPECT
TV/RADIO
CANCEL MIX
D.MENU SETUP D.DISP
A-B
REPEAT
I/II
SLEEP
1
4
6
11
15
9
21/25
22/26
29
30
33
37
41
34
38/45
42/48
16
2
3
5
8
7
10
13
14
12
17
18/19
20 24/28
23/27
32
31
36
35
40/47
39/46
44/50
43/49
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
Press these two buttons to increase/decrease the volume.
Press to change the DTV or DVD audio language.
No. Button Description
POWE R Turns the TV on or off to standby mode. 1
2MUT E Press to mute the sound. Press again to regain sound.
0-9 Press 0-9 to select a TV channel directly. The cannel will
change after 2 seconds.
3
4
5Return to the previously viewed program.
6
7
AU TO
8
9
P.MODE
10
S.MOD E
11
12
Select the picture mode.
Select the sound mode.
EXI T
MEN U
Exit from the current menu or sub-menu.
Allows you to navigate the on screen menus (OS D).
13
14 OK Select the option.
15
16 VOL+/-
CH+/- Press these two buttons to change channels up/down.
AU DIO
17
18
ASP ECT Press this button to select the aspect ratio of the screen.
20
DIS PLAY Press to display the source and channel info.
25
26
27
28
Use for adjustments in PC mode.
Delete function button.
Rename function button.
Move function button.
Skip function button.
R (DELETE)
G (RENAME)
Y (MOVE)
B (SKI P)
29 FAV Selects favorite channel(s).
30
TEX T Switch on/off of Teletext window.
31
32
33
34
35
36
SUBTITLE Press to select the subtitle language.
IND EX Returns to Index page by Teletext.
REV EAL Shows hidden words or pages by Teletext.
EPG Press to display E PG (Electronic Program Guide).
SOU RCE Press to select signal the source for the TV.
Eject/insert disc.
D.MENU Quick Teletext navigation or setup settings / DV D: Video
DVD Menu button.
SET UP DVD system setup.
D.DISP Quick navigation during Teletext or setup settings / DVD: DVD
Information button.
TIM E SHIFT Press to switch to T IME SHI FT mode.
SLE EP Set the delay time for the TV to turn off automatically.
Press to record the program immediately.
REC/
37
38 TV/R ADIO Press to switch between DTV and radio programs
21
22
23
24
I/II
19
Select NICAM audio mode.
Only be available for TV programmers with N ICAM transmission,
and default mode is mono.
REC.MEN U Press to switch to REC.MEN U immediately (DTV only).
SCA N
Press to Auto scan TV program.

14 15
OSD Menu Operation
No. Button Description
42
45
46
47
48
49
50
SIZ E Zoom In or Out of the Teletext window.
Play and Pause Media-Player / DVD.
Stops playback Media-Player and DVD.
Fast Rewind Media-Player and DVD.
Fast Forward Media-Player and DVD.
Plays the previous Media Player or DV D file/chapter.
Plays the next Media Player or DVD file/chapter..
Holds on the current Teletext page.
HOL D
Displays a sup-page of upper Teletext options.
SUB PAGE
MIX Sets the transparency of Teletext window.
DVD: Repeat mode selection.
REP EAT
40
41
43
44
39 CAN CEL Switches the Teletext window to the background; only the
current page no is visible.
First Time Installation
Language
Country
Energy Mode
< >
< >
< >
English
Australia
Store Mode
Auto Tuning
OK
Step one: It shows “OSD Language”for you to choose when boot for the first time
Step two: enter “Country” menu
Step three: Enter “Energy” menu
Enter “Tune Type” menu
Input Source
It supports
Satellite/DTV/ATV/DVD/AV/SCART/YPbPr/HDMI1/HDMI2/USB1/USB2.
Tuning Setup
Tune Type
Digital Type
Scan Type
< >
< >
DVT + ATV
DVB-T
Full
Network ID
Frequency
Symbol Rate
Auto
Auto
Auto
Start
OK
Back
MENU
Main Menu

16 17
OSD Menu Operation OSD Menu Operation
Main Menu
Auto Tuning
Under the Auto Tuning of CHANNEL menu,
Press /[OK] key to enter Auto Tuning, ◄ / ►
the following prompt box will appear.
Press [MENU] key to show main menu, there are six functions under main menu,
they are CHANNEL, PICTURE, SOUND, TIME, SETUP, LOCK,
Press to select these functions.◄ / ►
Main Menu
When Tune Type is DTV+ATV, press OK key to enter DTV auto searching.

18 19
OSD Menu Operation OSD Menu Operation
When search DTV, if you want to skip ATV and directly enter DTV,
press MENU to enter the menu as follows:
ATV Manual Tuning
Press key to select Yes/No, Press OK to execute. “Yes” is to skip the ATV ◄ / ►
searching and enter DTV searching. When searching, if you want to directly exit from
searching, press EXIT to exit.
Press to adjust channels, when there is signal, ◄ / ►
press OK thenbegin ATV searching.
Tips:After searching the channel manually, do press red key to save the channels, or,
after you switch the status, the channel you searched won't be saved.
DTV Manual Tuning
Press to adjust channels, when there is signal, ◄ / ►
press OK thenbegin DTV searching.
Program Edit
Main Menu Main Menu

20 21
OSD Menu Operation OSD Menu Operation
Channel edit function includes “Delete/Move/Rename/Skip/Fav”. Fav/Skip mark will
appear only after the users have some setting on the channel(Fav and Ship can't be
set together).
Delete: Press [RED] key to cancel the program that the cursor is in.
Move: Press [YELLOW] key, according to the prompt, execute MOVE function,
move the program order.
Skip: Press [BLUE] key, the program the cursor is will be marked with SKIP.
When execute CH+/CH-, skip this program, and this program can't be selected even
press the number key.
Rename: Rename function only appear and can be used under ATV program.
Press [GREEN] key under ATV, the program can be renamed.
Favorite: Press [FAV] key, mark the program the cursor is in as favorite program.
PVR
In CHANNEL menu, under PVR File system option, Press [OK] key ◄ / ►
to enter PVR menu, as follows:
Picture Mode
Standard->Mild->Dynamic->User->EC O Home,Picture mode selection.
Color Temperature
Standard-> Cool -> Warm -> UserColor Temperature selection
Noise Reduction
Off->Low->Middle->High-> AutoNoise reduction; it is under Hide status under VGA.
Main Menu Picture

OSD Menu Operation OSD Menu Operation
22 23
Time Mode
Press button to select Location, and then Press button ▲ / ▼ ◄ / ►
to select, then press OK button to confirm.
Sound Mode
Press button to select Location, and then Press button ▲ / ▼ ◄ / ►
to select, then press OK button to confirm.
Sound Time

OSD Menu Operation OSD Menu Operation
24 25
Lock Mode
Press button to select Location, and then Press button ▲ / ▼ ◄ / ►
to select, then press OK button to confirm.
Lock Mode
Press button to select Location, and then Press button ▲ / ▼ ◄ / ►
to select, then press OK button to confirm.
LOCK Option

OSD Menu Operation OSD Menu Operation
26 27
Record
In DTV, press [REC] button, it will display the following menu below, and start to
burn the current DTV program. Press button to move cursor to ◄ / ►
exercise different function according to hint.
Timeshift
In DTV, press [TIME SHIFT] button to implement the function of Timeshift.
Press button to move cursor to exercise different function ◄ / ►
according to hint.
In the option of Media Player on MainMenu,
Press [OK] to enter the Media Player menu, see the picture as follows:
Press to select Movie, Music or Photo。◄ / ►
Take Movie function for example, when there is focus point on Movie function,
press [OK] button to enter into File Selector menu.
On FileSelector menu, select film source that needs to be play according to the hint.
Press [PLAY/PAUSE] button to enter into the play mode of full screen;
press [PLAY/PAUSE] to return to Media Player menu.
PVR Media

OSD Menu Operation
28 29
Media
Movie
on Media Player menu, move cursor to moive, press [OK] button to enter into
FileSelector menu. Select the file you want to play, press [PLAY/PAUSE] to enter
into full screen play. Press button to move cursor, and operate ◄ / ►
according to different hint.
Music
In the same way, on Media Player menu, move cursor to Music, press [OK] button
to enter into FileSelector menu. Select the file you want to play,
press [PLAY/PAUSE] to enter into full screen play. Press button ◄ / ►
to move cursor, and operate according to different hint.
Photo
In the same way, on Media Player menu, move cursor to Photo,
press [OK] button to enter into FileSelector menu. Select the file you want to play,
press [PLAY/PAUSE] to enter into full screen play. Press button ◄ / ►
to move cursor, and operate according to different hint.
Built-in DVD Player Operation

30 31
Built-in DVD Player Operation (Cont.)
- - General Setup Page - -
TV Display
OSD Lang
Captions
Last Memory
Wide
Eng
Off
Off
Wide
Eng
Off
Off
- - General Setup Page - -
1. TV DISPLAY: Set the screen ratio
options are: Normal/PS (4:3 Pan Scan),
Nomal/PS (4:3 Letter Box) and Wide
(16:9). The default settings is wide.
2. OSD Lang: Set the OSD Language
options.
3. CAPTION: Play captions on supported
DVD titles, Options: ON/OFF.
4. LAST MEMORY: Play DVD from last
point. Options are: ON/OFF.
1. LT/RT: Logic Surround stereo
audio output. This matrix-based coding
process enables stereo audio tracks to
carry four channels (left, center, right
and surround) of audio data.
2. Stereo: Analog stereo audio output.
The player sends the subwoofer and
speech signals to the Tv’s speakers.
1. TV Type: The DVD player supports
output of various systems including
Multi, NTSC, PAL. The default setting is
PAL and this should not need to be changed.
2. Audio: DVD language selection options.
3. Subtitle: This player can display DVD
subtitle languages if supported by the DVD
disc. When playing DVD’s, you can hide the
subtitle or choose any of them as the current
subtitle language.
4. Disc menu: DVD Disc menu language
selection options.
5. PARENTAL This function disables
playback of specific DVD’s which may be
unsuitable for children.
Some DVDs are encoded with specific rating
levels. lf the rating level of the disc is higher
than that preset in this menu, playback of the
disc will be prohibited.
After selecting one of the PARENTAL codes,
the screen will display the PASSWORD page.
The default password is “8888".
6. PASSWORD [DVD only]: Allows you to
change the current PASSWORD.
7. Default: This option will return the DVD
to it’s factory default settings.
- - General Setup Page - -
STRSTR
- - General Setup Page - -
Downmix
Go To Speaker Setup PageGo To Speaker Setup Page
- - Preference Page - -
NTSC
Eng
Eng
Eng
NTSC
Eng
Eng
Eng
- - Preference Page - -
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Go To Preference PageGo To Preference Page
INITIAL SETTINGS (DVD)
Built-in DVD Player Operation (Cont.)

32 33
Built-in DVD Player Operation (Cont.)
Chapter
Title
All
O?
Built-in DVD Player Operation(Cont.)
Title Search [DVD]
Press [GOTO], then press the number buttons to enter the desired title number.
Repeat Playback
Press [REPEAT] during playback to activate repeat mode:
l
l l

34 35
Built-in DVD Player Operation(Cont.)
Subtitle language [DVD]
If the DVD you are watching has subtitles, press [SUBTITLE] repeatedly during
playback until the desired subtitle language appears on the TV screen. Example:
SUBTITLE 01/03 ENG
NOTE: Not all discs support this function.
Audio soundtrack language (multilanguage) [DVD]
This function works only with discs that have multiple audio soundtrack languages
recorded.
Press [AUDIO] repeatedly during playback until the desired language appears on
the TV screen.
NOTES:
When the desired language is not selected, even though the button is pressed,
the language is not available on the disc.
If the language is not recorded on the disc, only the available language on the
disc will be heard.
When you turn off the power or change the disc, you have to select the
language again.
On-screen information
Press [DISPLAY] repeatedly to show the disc information available (Title, Chapter,
Title elapsed playing time, Language, etc.).
Picture/JPEG CD playback
To start a slide show from the thumbnail pictures:
1. Press to select the desired picture.
To go to the next or previous thumbnail pictures, press or .
2. Press [OK] or / (Play) to start the slide show from the selected picture. During
the slide show:
PRESS to pause. Press (Play) to continue.
PRESS or to skip to the next or previous le.
If the picture appears upside down or sideways, press to ip/rotate
the picture.
/ / /
/ / /
Cleaning and Maintenance
WARNING!
For your personal safety, be sure to disconnect the power adaptor before
proceeding with any maintenance or cleaning.
Cleaning the TV screen
• Do not touch the TV screen with sharp objects.
• Use a clean, soft cloth to wipe off any dust and ngerprints from the TV screen
surface. Wipe in a straight motion from the center of the TV panel to the outside.
• Do not clean the screen with water or chemical cleaners, as this may damage the
TV screen surface.
• Never use chemicals such as household cleaning sprays, antistatic sprays or
uids, benzene or thinner to clean the TV screen.
Cleaning the main unit
• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
• If necessary, wipe the outside of the unit with a clean, soft cloth, moistened with
lukewarm water.
• Do not use benzene, thinner or alcohol as these chemicals will smudge the
surface nish.
Maintenance
• Do not dismantle this product by yourself, as this may cause damage. There are
no user-serviceable parts contained in the TV set.
• If your TV set has been damaged, contact the after sales support line for advice
or take it to a local service center for inspection or repair. No liability can be
accepted for any damage caused by non-compliance with these instructions or
any other improper use or mishandling of appliance.
• This product should not be adjusted or repaired by anyone except properly
qualied personnel.

36 37
Troubleshooting
9/30V DC
Troubleshooting (Cont.)
NOTE: Thank you for purchasing a Majestic quality TV. Our products have been designed with
over 15 years of engineering excellence and are designed of the highest quality standard in
the Marine and RV industry. Should you encounter any problems that cannot be easily
addressed within this instruction manual please feel free to contact us at these locations:
Australia (Int’l Head Office): 073 102 3575
New Zealand: 09 415 6936
USA: 561 459 1900
All other countries please email [e-mail]
Feel free to visit our website for more updated specifications or technical support
www.majestic-global.com