With a quick and easy installation process,
these floodlights provide powerful
illumination while saving you time and money
Say goodbye to traditional floodlights and upgrade to
Major Tech’s Range of Fast Connect LED Floodlights today!
Using a screwdriver, press down on the trigger latches of the
fast connector block, insert the prepared conductor into the
Live, Neutral, and Earth terminals until the insulation is
reached, release the trigger to securely lock the conductor in
place, and then reattach the cable gland onto the body of the
floodlight.
Feed your prepared wire ends through the thread-lock sealing
nut, and then through the bottom of the gland.
Unscrew the cable gland from the base of the
floodlight housing and then unscrew the bottom
thread-lock sealing nut from the body of the gland .
Strip your wire ends to a strip length of 14mm
STEP 1
STEP 2
STEP 3
www.major-tech.com
HOW FAST?
