Mako A16 User manual
USER MANUAL
A16 Battery Cabinet
Cabinet dimension of A16: 780mm× 70mm×1230mm (D×W×H), including connecting wires,
air switch and wire holder. The cabinet can be mounted up to 16 pieces 65AH/12V
battery or 100AH/12V battery, each layer has batteries and four layers in total. The
external appearance is shown as Figure 1.
Figure 1
Installation Steps:
1. Place the cabinet base, then plug the V-slot of the front and rear panel into the
flume of the base’s two sides correspondingly. Shown as Figure 2.
Figure 2
www.mak-powersis.de
USER MANUAL
A16 Battery Cabinet
2. According to the accompanying wiring diagram and list, laying the batteries on the base of the
battery cabinet, connecting the wires, locking the wires on battery poles. Shown as Figure3.
Figure 3
3. Cover the 1,2 and 3 racks. According to the accompanying wring diagram and list
to install the other batteries and wires. Shown as Figure .
www.mak-powersis.de
USER MANUAL
A16 Battery Cabinet
Figure
. After installation is completed, checking all connections and voltage of battery are
accurate. Then install right and left side panels. Shown as Figure 5.
Figure 5
5. Cover the cabinet’s cover. The installation of battery cabinet is completed. Shown
www.mak-powersis.de
USER MANUAL
A16 Battery Cabinet
as Figure 6.
Figure 6
Wiring Method: A16 battery cabinet is placed Four groups battery. First connect the
each battery group( PCS batteries each group)in series, then connect that four battery
groups in series. Connect the positive and negative of battery groups to the air switch
on the rear panel, then lead out two wires from it to connect to wire holder. Shown as
Figure 7.
www.mak-powersis.de
USER MANUAL
A16 Battery Cabinet
Case parts Quantity Wire(6mm2) Quantit
y
Remarks
Base 1 Black 50mm 15 Double-ended OL15.5-8 terminal
Front panel 1 Black 1500mm 1 Double-ended OL15.5-8 terminal
Rear panel 1 Red 200mm 1 Single-ended OL15.5-8 terminal
Rack 3 Red 300mm 1 Single-ended OL15.5-8 terminal
Side panel 6
Cover 1 1
Cover of Wire holder 1
C 5 bracket black 1
63A-1P/offwhite
Air switch
1
60A-2P black wire
holder
1
M5*25 cross pan head
screw
2
PM5*10 cross pan head
screw
1
M5T=3.8mm external
hex nut
3
www.mak-powersis.de
Table of contents
