M&S Systems PSW112 User manual

Models
oPSW112 –Powered Subwoofer
115934 Rev -
M&SSystems
2861 Congressman Lane
Dallas, TX 75220
Phone: (800) 366-6874
www.mssystems.com
PSW112
OwnersManual
PlatinumSeries
Subwo
ofer

Page2 PSW112OwnersManual M&SSystems Page11
Thank you for purchasing M&S Systems Home Audio
products. Your M&S Platinum Series subwoofer will bring
you years of listening enjoyment. Our products offer the
finest in quality home theater and deliver superior
performance at an affordable price.
Key Features
♦12” speaker in a tuned port enclosure for minimum
size/maximum sound efficiency
♦100 watt RMS amplifier
♦High level/low level inputs
♦Variable crossover adjustment
♦Crossover bypass switch
♦Auto-power switch and indicator
♦Volume control
Introduction Warranty
M&S SYSTEMS Limited 2
-
Year No
-
FaultProductWarranty
M&S SYSTEMS warrants for 2 years all products to be free of defects (M&S
SYSTEMS honors the 10-YearNo-Fault warranty for AirVac Gold power units).
Th
e warranty period begins from either (1) the date of “first user” purchase of this
product or (2) the first close of escrow date on a residence in which this new
product was originally installed. This warranty extends to the original user of the
product and to each subsequent owner of the product during the term of this
warranty. M&S SYSTEMS will repair or replace, at its option, parts and materials
at no charge. Parts supplied under this warranty may be new or rebuilt at the
option of M&S SYSTEMS.
If, during the limited warranty period, it appears as though this product contains a
defect, which is covered by this limited warranty, call our toll free service
number before dismantling the product (1-800-877-6631).Rememberto
attain a Return Authorization Number (RAN) before returning any product
to M&S SYSTEMS. Send the product freight pre-paid and insured to our
service center for warranty repair.
You will be advised on shipping instructions
when you call the toll free service number. M&S Systems will return
the repaired
product freight pre-paid within the U.S.A. The installing dealer or distributor may
assist you, at your choice and expense, with returning product for repair. Please
include a brief description of the problem and a dated proof-of-purchasereceipt
with any product that is returned for warranty repair.
ANYPRODUCT
RETURNED WITHOUT A RETURN AUTHORIZATION NUMBER WILL
BE REFUSED.
THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR OTHERWISE, AND OF ANY OTHER
OBLIGATIONS OR LIABILITY ON THE SELLER’S PART. THIS
LIMITED WARRANTY DOES NOT COVER DAMAGE CAUSED BY
IMPROPER INSTALLATION, THE VIOLATION OF APPLICABLE
BUILDING OR ELECTRICAL CODESOR THE USE OF NON-
M&S/NON-AIRVAC WIRE, CABLE OR WALL HOUSINGS. THIS
LIMITED WARRANTY APPLIES ONLY TO PRODUCTS INSTALLED
IN A PRIVATE RESIDENCE.
UNDER NO CIRCUMSTANCES SHALL THE SELLER BE LIABLE FOR
CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES ARISING
INCO
NNECTION WITH USE OR INABILITY TO USE THIS PRODUCT.
IN NO EVENT SHALL SELLER’S LIABILITY, FOR BREACH OF
WARRANTY,BREACHOFCONTRACT,NEGLIGENCEORSTRICT
LIABILTY, EXCEED THE COST OF THE PRODUCT COVERED
HEREBY. NO PERSON IS AUTHORIZED TO ASSUME FOR US ANY
OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS
PRODUCT.
Some states do not allow the exclusion or limitation of consequential, incidental
or special damages, so the above limitation or exclusion may not apply to you.
This limited warranty gives you s
pecific legal rights, and you may also have other
rights, which vary from state to state.

PSW112 Subwoofer
Each box contains one subwoofer
available in black only. This is a
freestanding down-firing subwoofer with
adjustable crossover.
Subwoofer Specifications
Frequency Response 30Hz/140Hz
Power Rating 100 Watts RMS
Crossover 40Hz/140Hz
(adjustable)
Height 15 ¾”
Width 14”
Depth 16”
Weight 33.5 lbs
Page10 PSW112OwnersManual M&S Systems Page3
ServiceandTroubleshooting
M&S Systems is committed to producing high quality
products for the home. If you have any questions or
problems with your subwoofer or if it is not operating
properly, contact your M&S installer or call M&S Systems
at 1-800-366-9422 and speak with one of our technical
support specialists.
You may also visit our web site at www.mssystems.com
for a frequently asked questions list that may provide you
with quick assistance with any troubleshooting or service
concerns.
After carefully unpacking your subwoofer, the carton an
d the
packaging material should be saved for possible use later.
To attach the feet to the subwoofer, lay it on its top with the
speaker facing up. Remove the feet from their package and
screw them into the pre-
drilled holes located on the bottom of the
subwoofer with a screwdriver. Once the feet are tightly secured,
place the subwoofer upright on its feet.
If the subwoofer appears to be damaged, do not attempt to
repair or connect the unit to the amplifier. If you have to return
the subwoofer first remove the feet, then repack the subwoofer
and notify your distributor or M&S Systems for replacement or
repair.
You can contact the M&S Customer Service team at 1-800-877-
6631.
UnpackingYourSubwoofer

For the best sound, place the PSW112 subwoofer next to a wall
or in a front corner of your room near your main speakers.
IMPORTANT! Do not cover or seal the back of the PSW112
subwoofer. Doing so will reduce the air ventilation and may
damage the unit.
M&SSystems Page9Page4 PSW112OwnersManual
SubwooferPlacement
SubwooferPlacement
SubwooferControls
v
X’Over Bypass
–
This control manages
the frequency
control of the subwoofer.
oX’Over Bypass Off –The subwoofer operates
based on the frequency adjust control settings.
oX’Over Bypass On –The frequency adjust
control setting is bypassed. This extends the
subwoofer high-end range to approximately
300Hz.

Page8 PSW112OwnersManual M&SSystems Page5
First, turn off power to your entire system to prevent accidents
such as short circuits from damaging your equipment.
The PSW112 subwoofer can be connected to your system using
one of three methods. The method you select is based on the
configuration of your system.
1. Amplifier with a subwoofer output connection –If your
system has a subwoofer output connection, use an RCA
type connector to connect the PSW112 subwoofer to your
receiver. A shielded audio cable is required for this setup
with a Y-adapter connecting the audio cable to Left and
Right Line Level Input on the subwoofer.
2. Separate pre-amp/power amp configuration –When
using a separate pre-amplifier/power amplifier the audio
cables may be routed through the PSW112 subwoofer unit.
Connect the pre-amplifier to the Line Level Inputs via RCA
cables and connect the Line Level Outputs to the power
amplifier.
ConnectingYourSubwooferSubwooferControls
Your PSW112 subwoofer has
several controls that allow you
to configure the unit to reflect your personal music tastes. All
controls are found on the back of the unit.
vFrequency Adjust –This adjusts the upper
frequency range of the subwoofer. A typical setting
when using the subwoofer with the MNCX Platinum
Mini-Cube speakers is between 120Hz to 140Hz.
vAuto Power –The subwoofer can be set up with
two different power configurations:
oAuto Power On –
The subwoofer will power
down a few minutes after the signal is
removed and it will turn on immediately
when it receives a signal.
oAuto Power Off –The subwoofer is
constantly on if the unit is powered up.
vVolume Control –The volume control should be
set to the desired bass level for the system.
vPhase –The Phase switch is set for the best bass
sound. Switch between the 0 and 180 position until
the bass is the loudest. In some applications, there
may be no noticeable difference and in this case
leave the switch in the 0 position.

Page6 PSW112OwnersManual M&SSystems Page7
SpeakerLevelConnections
The Speaker Level Output has a 100Hz built
-
in high pass
filter.
The PSW112 Speaker Level Connections are shown in the
picture below and can be found on the back of the
subwoofer.
LineLevelConnections
The PSW112 Line Level Connections are shown in the
picture below and can be found on the back of the
subwoofer.
Plug in the PSW112 power cord. Do not plug the PSW112
subwoofer into a switched outlet on your receiver. The
PSW112 has an automatic stand-by circuit to ensure prompt
power up and connecting the unit to a switched outlet will
delay the output and lead to noise on power down.
3.
Connect using speaker wires
–
Connect the wires
from the amplifier to the “Speaker Level Inputs” and
the wires going to the speakers should be connected
to the “Speaker Level Outputs”.
IMPORTANT! Make sure there are no loose
strands of wire touching each other across the
speaker or amplifier terminals. This can create a
short circuit and damage your electronics.
Other manuals for PSW112
1
Table of contents
Other M&S Systems Subwoofer manuals