Manhattan Comfort Plaza Panel 64.25 224BMC1 User manual

Ed. 002, 2019/07 - Manhattan Comfort.
Plaza Panel 64.25
Model # 224BMC1, 224BMC12, 224BMC2, 224BMC21, 224BMC6,
224BMC8, 224BMC9, 224BMC94
888-230-2225
[e-mail]
40
lb
The indicated values consider static weights and evenly distributed over the parts.
10
lb
10
lb
10
lb
10
lb
10
lb
5
lb

n.° ID Parts Identification (Description) Quantity
REAR VIEW
2
1
2
1
1
01
04
06
02
05
03
1
2
INCLUDED IN THE PACKAGE
Left and Right Panel
Rear Column
Middle Panel
Upper Rear Bar
Upper Shelf
Bar for wall
07
08
09
10
11
2
Left and Right Side Panel
2
Left and Right Top Panel
1
Left Base
1
Right Base
1
Glass Shelf
05
08
09
01
10
07
07
06
02
01
03
03
04
11
09
07
For fixing
behind the panel
For fixing
on the wall
01
02
01

3
INCLUDED IN THE PACKAGE
TOOLS NEEDED
Simple hammer.Simple and phillips
screwdriver.
Drilling machine and electric screwdriver with
drill bit Ø1/2 inche and phillips tips.
Level indicator.
!IMPORTANT! Two people are recommended to assemble this product.
6x
CA1 2x SC 18x CA2
6x
JC 12x P2 27x P30
4x
P6 4x
TM 4x
TFA1
18xP10 4x
TPF 3xSV
3x
P1 3x FKT

STEP 3
4
DETAIL 1
• Line the floor with the foam
mantle of the packing to
protect the parts and
arrange the Panels (01)
and (02) with the rear face
upwards, correctly checking
the position of each
according the holes and
as shown in the drawing.
• Align the edges of the
Panels (01) and (02) and
fix them together by
applying the steel plates
(JC) with bolts (P2), as
shown in the DETAIL 1.
• Position the Rear Columns
(03) behind the Panels (01)
with dowels (CA1) according
to the drawing, and fix
them with bolts (P30).
• Fix Rear Bar (04), positioning
it correctly behind the panels
with dowels (CA1) and glue (SC)
and applying the bolts (P30).
ATTENTION!
APPLY GLUE.
03
04
02
01
Rear face
Rear face
STEP 1
03
01
Rear face
06
07
06
• Fix the Top Panel (07) and
the Left Base (08) in the
Side Panel (06) with
dowels (CA2) and
Minifix hardware (P6+TM),
as shown in the DETAIL 2.
• Fix the Top Panel (07)
and the Right Base (09)
in the Side Panel (06)
with dowels (CA2) and
Minifix hardware (P6+TM).
• Fix the supports for glass
(SV) in the Side Panels (06)
with bolt (P1).
STEP 2
DETAIL 2
07
08
09
• Fix the Upper Shelf (05) in
the Panels (01) and (02),
applying dowels (CA2) and
bolts (P10) in the indicated
positions in the drawing.
• Fix the sets of Top Panel (07),
Side Panel (06) and Left Base
(08) and of Top Panel (07),
Side Panel (06) and Right Base
(09) in the Panels (01) and (02),
applying dowels (CA2) and
bolts (P10) in the indicated
positions in the drawing.
• Fix the support for glass (SV)
in the Middle Panel (02) with
bolt (P1).
06
01
Front face
02
Front face
01
Front face
07
07
08
09
05

STEP 4
5
50.00in*
10.80in
Minimum fixing distance
of the Bar (11) to the
panel installation
close to walls corner.
11
ATENTION!
Before installing the panel, check the
conditions of the wall for strength to
properly support and anchor the
weight of the suspended furniture,
including equipment and objects
that may be fixed to the panel.
The Kap Toggle bushings (FKT)
supplied with the product are for
hollow walls or dry wall type.
Check the type of wall on which the
installation will be made and, if
necessary, look for more suitable
bushings or fastening systems.
To mark the position and fix the
Bar (11) on the wall, check the
level of the part.
42.68in
• Mark the position of the holes on
the wall to fix the Bar (11), as
shown in the drawing and using
the bar itself as a reference.
• With drilling machine and
drill bit Ø1/2 inch, make the
holes in the wall.
• Apply the bushings (FKT) into
the holes in the wall and fix
the Bar (11) with the bevelled
edge facing up and to the wall,
applying the bolts 1/4 x 2.1/4"
as indicated in the drawing.
1/2" hole
in the wall
Kap Toggle
bushing (FKT)
Bolt
1/4 x 2.1/4"
*The height of 50.00 inches (1270mm)
indicated in the drawing, between the
floor and the lower edge of the Bar (11)
is only suggestive to install the Panel
with its lower edge at approximately
17.32 inches (440mm) from the floor.
DETAIL 3

STEP 5
6
11
Fixed on
the wall.
04
Fixed behind
the panel.
01
02
• With the Panel already
assembled, fit the Bar (04)
fixed behind the panel
in the Bar (11) fixed
on the wall.
STEP 6
• At the end of the installation,
apply the security bolt (P30) in
the indicated hole, to fix the
Middle Panel (02) in the Bar (11)
on the wall and prevent
movement and accidentally
dropping the panel.
• Insert the plastic covers into
the holes for pass wires.
• Insert the Glass Shelf (10) in
the supports (SV) already fixed
in the Side Panels (06) and in
the Middle Panel (02) and
tighten the bolt of each support.
IMPORTANT! To remove the panel from
the wall, to unscrew the security bolt (P30)
applied as in STEP 06 and moving it
upwards slightly so as to disengage the
chamfered edges of the Bars (04) and (11)
fixed behind the panel and on the wall.
Before moving the panel, remove TV and
other objects that are installed and ensure
that the entire set is safe, preventing falls
and damage to the panel and equipment .
01
05
02
01
05
06
06
07
07
09
08
10
06
01
07
08
07
09