Manhattan Comfort Liberty 62.99 201AMC6 User manual

888-230-2225
[e-mail]
Ed. 006, 2019/08 - Manhattan Comfort.
Liberty TV Stand 62.99
Model # 201AMC6, 201AMC63, 201AMC64, 201AMC67, 201AMC69,
201AMC8, 201AMC9, 201AMC93, 201AMC94, 201AMC96, 201AMC97
44
lb
The indicated values consider static weights and evenly distributed over the parts.
22
lb
22
lb
11
lb

n.° ID Parts Identification (Description) Quantity
REAR VIEW FRONT VIEW
03
01
04
06
05
07
08
08
09
1
Right Side Panel
Base 1
Left Side Panel 1
1
Shelf
Partition 1
01
04
06
07
08
02
05
03
09
Top Panel 1
2
Door
1
Back Panel
4
Wood Feet
02
07
INCLUDED IN THE PACKAGE
2

4x
A4x BC
D E F
16x
6x 8x 8x
GH I
6x 45x 4x
J K L
16x 4x 1x
M2x
INCLUDED IN THE HARDWARE
3
TOOLS NEEDED
N2x

09
01
05
03
04
05
06
03
01
02
04
• Fix the feet (9) under the
Base (01) with bolts (A).
• Apply the protective felt (K)
on the bottom of the feet (09).
• Apply the plastic covers (B)
on top of the bolts (A).
STEP 1
STEP 2
STEP 3
• Connect the Shelf (04) into
Left Side Panel (03) and
Partition (05) with dowels (C)
and cam lock hardware (E + F).
DETAIL 1
• Connect Side Panels and Partition
(03), (05) and (06) into Base (01)
with dowels (C) and bolts (D).
• Connect Top Panel (02) onto Side
Panels and Partitions (03), (05) and
(06) with dowels (C) and cam lock
hardware (E + F).
• After the fixing, apply the adhesive
covers (G).
4
09
09
09

Fixer
bolt
Adjustment
bolt
01
03
04
08
02
06
07
07
07
05 06
02
02
DETAIL 2
• Connect Back Panel (08) with
nails (H).
STEP 4
STEP 5
STEP 6
Preparing the Doors (07):
• Insert the plastic ring (N) in
the Doors (07).
• Fix the hinges (I) in the two
Doors (07) with bolts (J), as
shown in DETAIL 2.
Installing the Doors (07):
• Fix the hinge connectors (I) of the
Doors (07) on the Partition (05) and
the Right Side Panel (06) with bolts
3.5 x 14mm (J), taking the markings
on the parts (05) and (06) as
reference for correct positioning.
The hinge connector includes two
bolts, shown in DETAIL 3. Use the
fixer and adjustment bolts to tighten,
adjust and align the doors.
• Fix under the Top Panel (02) the
plastic stop (L) for doors with
bolts (M), as shown in DETAIL 4 .
DETAIL 3
DETAIL 4
5

Ed. 002, 2019/07 - Manhattan Comfort.
Liberty Panel 62.99
Model # 221BMC1, 221BMC12, 221BMC2, 221BMC21,
221BMC6, 221BMC8, 221BMC9, 221BMC94
888-230-2225
[e-mail]
33
lb
The indicated values consider static weights and evenly distributed over the parts.
6.6
lb

n.° ID Parts Identification (Description) Quantity
REAR VIEW
1
1
2
1
1
01
04
06
02
05
03
1
2
INCLUDED IN THE PACKAGE
01
Upper Panel
Rear Column
Lower Panel
Upper Rear Bar
Upper Shelf
Bar for wall
02
03
03
04
06
05

2x
A2x BC
D E F
1x
6x 12x 24x
3
GH I
4x 1x 2x
INCLUDED IN THE PACKAGE
TOOLS NEEDED
Simple hammer.Simple and phillips
screwdriver.
Drilling machine and electric screwdriver with
drill bit Ø1/2 inche and phillips tips.
Level indicator.

STEP 2
4
DETAIL 1
• Line the floor with the foam mantle of the packing to protect the parts and
arrange the Panels (01) and (02) with the rear face upwards , correctly checking
the position of each according the holes and as the drawing.
• Align the edges of the Panels (01) and (02) and fix them together by applying
the steel plates (D) with bolts (E), as shown in the DETAIL 1.
02
01
Rear face
LOWER EDGE
Rear face
• Position the Rear Columns (03) behind the Panels (01) and (02) according to
the drawing, and fix them applying bolts (F).
• Position the Rear Bar (04) behind the Upper Panel (01) with dowels (A) and glue (C)
according to the drawing, and fasten it applying the indicated ten bolts (F).
ATTENTION!
APPLY GLUE.
03
04
03
02
01
Rear face
Rear face
STEP 1

STEP 4
STEP 3
5
• Fix the Upper Shelf (05) in
the Upper Panel (01) with
dowels (B) and bolts (G).
05
03
03
04
02
01
Rear face
Rear face
54.50in*
14.50in
Minimum fixing distance of the Bar (06) to
the panel installation close to walls corner.
06
ATENTION! Before installing the panel, check the conditions of
the wall for strength to properly support and anchor the weight
of the suspended furniture, including equipment and objects
that may be fixed to the panel. The Kap Toggle bushings (I)
supplied with the product are for hollow walls or dry wall type.
Check the type of wall on which the installation will be made and,
if necessary, look for more suitable bushings or fastening systems.
To mark the position and fix the Bar (06) on the wall, check the
level of the part.
*The height 54.50in indicated in the drawing, between the
floor and the lower edge of the Bar (06) is inly suggestive
to install the Liberty Panel with its lower edge at
approximately 32.50in from the floor.
34.33in
• Mark the position of the holes on the wall to fix the Bar (06),
as shown in the drawing and using the bar itself as a reference.
• With drilling machine and drill bit Ø1/2 inche, make the holes
in the wall.
• Apply the bushings (I) into the holes in the wall and fix the
Bar (06) with the bevelled edge facing up and to the wall,
applying the bolts as indicated in the drawing.
1/2 inche hole
in the wall
Kap Toggle
bushing (I)
Bolt
1/4 x 2.1/4 inche

STEP 5
6
06
Fixed on
the wall.
04
Fixed behind
the panel.
01
02
05
• With the Panel already
assembled, fit the Bar (04)
fixed behind the panel in
the Bar (06) fixed on the wall.
STEP 6
• At the end of the installation,
apply the security bolts (F)
into the indicated holes, to fix
the Panel (01) in the Bar (06)
on the wall and prevent
movement and accidentally
dropping the panel.
IMPORTANT! To remove the panel from
the wall, to unscrew the security bolts (F)
applied as in STEP 06 and moving it
upwards slightly so as to disengage the
chamfered edges of the Bars (04) fixed
behind the panel and on the wall.
Before moving the panel, remove TV and
other objects that are installed and ensure
that the entire set is safe, preventing falls
and damage to the panel and equipment.
01
05
02