Manhattan 150163 User manual

3200 SERIES
2.1 MULTIMEDIA
SPEAKER SYSTEM
USER
MANUAL
Model 150163
MAN-150163-UM-0409-01

Thank you for purchasing the MANHATTAN
®
3200 Series 2.1 Multimedia
Speaker System, Model 150163.
The easy-to-follow installation instructions in this manual will soon have
you enjoying the benets of these popular features:
• Full-range speakers deliver rich, powerful sound — ideal for games,
movies and music
• Down-ring subwoofer radiates deep bass response
• Separate volume and bass controls
• Shielded to prevent distortion and maintain clear, crisp sound
• Lifetime Warranty
Package Contents
• 3200 Series 2.1 Multimedia Speaker System
• RCA cables and user manual
SAFETY PRECAUTIONS
Prior to installing your speakers, read the following safety guidelines to
help prevent damage to any electrical components or harm to users.
• Do not place this product or any of its parts near heat or potential heat
sources, nor in any moist or damp environment.
• Do not hit, drop or mishandle electrical components in such a way as
to loosen, break or otherwise render inoperative any interior or
exterior parts.
• Do not remove the back panel except as directed by a qualied
technician in order to minimize the possibility of electrical shock. If in
need of repair or inspection, bring the speaker(s) to a professional
repair person.
• Should liquids or other materials (including fragments of broken parts)
get inside the speaker cabinet, immediately shut power off to the
speaker and have it professionally inspected and/or repaired before
further operation.
• Turn off the power and unplug from power source when the system is
not in use.
3 3

CONNECTIONS
44
Subwoofer Front Panel with Left Speaker (rear) & Right Speaker (front)
Subwoofer Rear Panel (Control/Connection Section, Enlarged)
8
76
5
1 Volume control
2 Power LED
3 Bass control
4 Vent for bass
5 Power switch
6 Power cord
7 Input jacks: to
(L)eft and (R)ight
channels from
audio source
8 Output jacks: to
(L)eft and (R)ight
speakers
1
2
3
4

5
1. Carefully unpack the speakers and cables. Do not lift or remove the
speakers from the box by the function knobs or other attachments as
this may damage the speaker unit.
2. Place the speakers and subwoofer in the desired listening location.
3. Connect the right and left speaker cables to the corresponding (left
and right) Speaker OUT jacks on the rear panel of the subwoofer.
4. Use the included RCA cable to connect the Stereo IN jacks on the
rear panel of the subwoofer to the Line Out or Audio Output jack
of the audio source (tuner, computer, game system or whatever).
NOTE: Connect to the headphone jack of the source if it’s the only
output available.
5. Plug the AC power cord on the back of the subwoofer into an
electrical outlet and ip the power switch on the rear panel of the
subwoofer to the on position.
6. With the audio source turned on and generating an audio signal,
adjust the volume and bass controls on the front of the subwoofer
(adjusting the volume/audio output level on the audio source as
needed). NOTE: If connecting to a computer, you may want to conduct
a sound card test. With the speakers properly connected and turned
on, nd the computer’s sound card in the device manager and begin
the test. Each channel should be able to be tested for sound and link.
With the “test” window still open, turn up the volume on each channel
(speaker). Test sound should be audible.
Suggestions for Setup & Operation
• Though featuring a magnetically shielded design so the speaker
system is free from interference when placed near a monitor or TV,
the subwoofer can cause interference in other components. Position
the subwoofer at least 30 cm (1 ft.) away from monitors and TVs.
• If only one speaker emits CD audio when the system is plugged into
a headphone jack, it’s because WAV les and games normally
transmit only one track of audio.
• If one or more of the speakers don’t provide sound once power is on,
check all connections and controls. NOTE: If adjusting the bass
control doesn’t affect the audio output, it could simply be that the
signal source doesn’t include frequencies below 250 Hz.
5

SPECIFICATIONS
Standards and Certications
• CE
General
• RMS power 8 W + 4 W x 2
• Frequency response: satellites, 55 Hz – 20 kHz; subwoofer, 20 Hz -
250 Hz
• Signal-to-noise ratio (S/N): <65 dB
• Total harmonic distortion (THD): ≤0.1%
• Impedance: satellites, 4 Ohms; subwoofer: 6 Ohms
• Cabinet: laminated wood product
• Driver(s) diameter: subwoofer: 10.1 cm (4 in.); satellites: 10.1 cm
(4 in.)
• Controls: volume and bass, front-mount; power switch, rear-mount
• Power: internal power supply
• Connections: RCA and 3.5” stereo
• Cables: power, 1.3 m (4.3 ft.); RCA, 1.3 m (4.3 ft.), RCA to 3.5” stereo,
1.4 m (4.8 ft.)
• Dimensions: subwoofer: 14 x 23.5 x 23.5 cm (5.5 x 9.25 x 9.25 in.);
satellites: 9 x 10 x 14 cm (3.5 x 3.9 x 5.5 in.)
Package Contents
• 3200 Series 2.1 Multimedia Speaker System
• RCA cables and user manual
66

Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN®offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at