Mania Eken User manual

COMPONENTS
1. Action camera Eken
2. Protection case
3. Two adapters for mounting on flat surfaces
4. Camera trigger
5. External battery charger
6. USB 2.0 charging cable
7. USB 3.0 cable for charging or data transfer
8. Additional battery
9. USB power adapter
10. Tightening screwdriver
11. Connecting element with a screw hole
12. Connecting element
13. Connecting element for mounting on flat
surfaces
14. Camera mounting frame for camera stands
15. Strap for the remote trigger
16. Cable ties
17. Element for mounting on the handlebar
18. Selfie stick
19. Head strap mount
20. Body strap mount
SPECIFICATIONS
Video:
o4K30 / 2.7K30
o1080p60/30 (H.264)
o720p120 (H.264)
Recording angle: 170 °
Water resistance: up to 30m
Wi-Fi: 802.11 b/g/n
Storage: Micro SD (16GB or 32GB)
Battery: 1050mAh
Input / Output: Micro USB / HDMI
Dimensions: 59.3 * 24.6 * 41.1 mm
Charging time: 5 hours
ON / OFF CAMERA
The camera turns on by holding the button on the front of
the camera for 3 seconds. To turn it off, hold the button
again for 3 seconds.
IMAGE RECORDING MODES
When the camera is turned on, you can switch between
different capture modes by briefly clicking on the button
on the front of the camera.
Video recording
Photographing
Burst mode photography
Time-lapse photography
To start recording or capturing an image, press the button
with the red ring on the top of the action camera.
Recording time
Settings
To change camera settings, press the front button until
appears on the screen. When the image appears,
press the button with the red ring, on the top side of the
camera. To move between adjusting functions, use the ↑
and ↓ buttons on the side of the camera.
Application for monitoring the camera via smartphone
Application Name: Ez iCam
Scan the QR code to download the
application to your phone.
INSTRUCTIONS FOR USE
Premium 4K Sports Camera- Eken

To connect the smartphone to the camera, hold down the
↓ key for about 3 seconds. On the camera display, the
following message will appear: "Waiting for Wifi
Connection....”On the phone, launch the Ez iCam
application and press the blue button "Connect device Wi-
Fi”.
When you click on the "Connect device Wi-Fi.” button,
your device will find the camera. If the camera is found,
the name of your camera will appear on the phone (iCam
H9R_serial number). Tap on the name to connect the
camera.
Please comply to all the waste disposal and environmental
regulations valid in your country of residence!
This product should be disposed as electronic waste (e-waste).